component
ADTL082ARMZ-REEL
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADTL082ARMZ-REEL
Analog Devices · FET Input Amplifiers · MSOP-8
ADTL082ARMZ-REEL from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to a maximum of ±13.5 V at RL = 10 kΩ and has a short-circuit output current of ±27 mA; the absolute maximum rating allows an indefinite short to GND. |
| 2 | -IN A | input | Inverting input of amplifier A, with an input voltage range of −11 V to +15 V (VCC = ±15 V) and input voltage limited to ±V supply. |
| 3 | +IN A | input | Non-inverting input of amplifier A, with a common-mode input voltage range of −11 V to +15 V and input voltage limited to ±V supply. |
| 4 | -V | power_in | Negative supply rail; supplies must be established simultaneously with, or before, any input signal is applied, and input current must be limited to 10 mA if this is not possible. |
| 5 | +IN B | input | Non-inverting input of amplifier B, with a common-mode input voltage range of −11 V to +15 V and input voltage limited to ±V supply. |
| 6 | -IN B | input | Inverting input of amplifier B, with an input voltage range of −11 V to +15 V and input voltage limited to ±V supply. |
| 7 | OUT B | output | Output of amplifier B, which swings to a maximum of ±13.5 V at RL = 10 kΩ and has a short-circuit output current of ±27 mA; the absolute maximum rating allows an indefinite short to GND. |
| 8 | +V | power_in | Positive supply rail; the absolute maximum supply is ±18 V or +36 V, and the part is specified for ±15 V operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 1.5 | 5.5 | mV | 3 | ||
| Offset Voltage | VOS | 9 | mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Offset Voltage Drift | ΔVOS/ΔT | 10 | μV/°C | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Bias Current | IB | 2 | 100 | pA | 3 | ||
| Input Bias Current | IB | 5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Offset Current | IOS | 2 | 100 | pA | 3 | ||
| Input Offset Current | IOS | 5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Voltage Range | VCM | -11 | 15 | V | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 80 | 86 | dB | VCM = −11 V to +15 V | 3 | |
| Large Signal Voltage Gain | AVO | 100 | 200 | V/mV | RL = 2 kΩ, VO = −10 V to +10 V | 3 | |
| Large Signal Voltage Gain | AVO | 50 | V/mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Maximum Output Voltage Swing | VO | -13 | 13.5 | V | RL = 10 kΩ | 3 | |
| Maximum Output Voltage Swing | VO | -13 | V | RL = 10 kΩ, −40°C ≤ TA ≤ +125°C | 3 | ||
| Maximum Output Voltage Swing | VO | -12 | V | RL = 2 kΩ, −40°C ≤ TA ≤ +125°C | 3 | ||
| Short-Circuit Output Current | ISC | -27 | 27 | mA | 3 | ||
| Power Supply Rejection Ratio | PSRR | 80 | 86 | dB | VDD = 8 V to 36 V | 3 | |
| Supply Current per Amplifier | ISY | 1.2 | 1.8 | mA | 3 | ||
| Supply Current per Amplifier | ISY | 2 | mA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Voltage | 36 | V | Printed as ±18 V or +36 V | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Operating Temperature Range | -40 | 125 | °C | 4 | |||
| Lead Temperature | 300 | °C | Soldering 60 sec | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Input Current (power sequencing) | 10 | mA | If supplies cannot be established simultaneously with or before input signals | 4 | |||
| Thermal Resistance, junction-to-ambient, 8-Lead MSOP (RM-8) | θJA | 210 | °C/W | 8-Lead MSOP (RM-8) | 4 | ||
| Thermal Resistance, junction-to-case, 8-Lead MSOP (RM-8) | θJC | 45 | °C/W | 8-Lead MSOP (RM-8) | 4 |
CAD (KiCad official)
- Symbol:
ADTL082ARMZ-REEL - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
adtl082armz-reel-etched.step/adtl082armz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adtl082armz-reel.step/adtl082armz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
94c980587ebb2ccb, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).