ADT7310TRZ-REEL7

{
  "slug": "adt7310trz-reel7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Temperature Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "adt7310trz-reel7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adt7310trz-reel7.kicad_sym",
    "adt7310trz-reel7.kicad_mod",
    "adt7310trz-reel7.glb",
    "adt7310trz-reel7.step",
    "adt7310trz-reel7.lbr",
    "docs/hero.png",
    "docs/adt7310trz-reel7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adt7310trz-reel7-hero.glb",
    "adt7310trz-reel7-hero.overlay.json",
    "adt7310trz-reel7-etched.glb"
  ],
  "component": {
    "mpn": "ADT7310TRZ-REEL7",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590145895783030784",
    "parts": {
      "symbol": "adt7310trz-reel7.kicad_sym",
      "footprint": "adt7310trz-reel7.kicad_mod",
      "model_3d": "adt7310trz-reel7-hero.glb",
      "model_3d_plain": "adt7310trz-reel7-etched.glb",
      "model_3d_step": "adt7310trz-reel7-etched.step",
      "model_3d_step_plain": "adt7310trz-reel7.step",
      "lbr": "adt7310trz-reel7.lbr"
    },
    "distributor_links": {
      "lcsc": "C578060",
      "digikey": "ADT7310TRZ-REEL7TR-ND",
      "mouser": "584-ADT7310TRZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T07:06:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADT7310TRZ-REEL7TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-ADT7310TRZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input used to clock data in and out of any ADT7310 register."
      },
      {
        "number": "2",
        "name": "DOUT",
        "type": "output",
        "description": "Serial data output; data is clocked out on the SCLK falling edge and is valid on the SCLK rising edge."
      },
      {
        "number": "3",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input for loading the control registers; data is clocked into the registers on the rising edge of SCLK."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Chip select input; the device is selected when this input is low and disabled when it is high."
      },
      {
        "number": "5",
        "name": "INT",
        "type": "output",
        "description": "Overtemperature and undertemperature indicator logic output, open-drain, power-up default active-low comparator interrupt, requires a pull-up resistor typically 10 kΩ."
      },
      {
        "number": "6",
        "name": "CT",
        "type": "output",
        "description": "Critical overtemperature indicator logic output, open-drain, power-up default polarity active low, requires a pull-up resistor typically 10 kΩ."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Analog and digital ground."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply voltage of 2.7 V to 5.5 V; the supply should be decoupled with a 0.1 µF ceramic capacitor to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types are mapped to KiCad classes from the functional descriptions. DOUT is typed as output, alt; The datasheet pin table (Table 4 / Figure 5) is on page 6 of 24, and the pinout is shown for the 8-l"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0474,
        "at": "2026-10-19T07:03:22"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590145895783030784",
        "pages": 24,
        "sha256": "fb0898cef1d109e4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adt7310trz-reel7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adt7310trz-reel7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18e2f4c817855ed37489018a3c50f9dc0e70b4d98b2776e3416cbf64aba5e968",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}