component
ADS8344N
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADS8344N
Texas Instruments · Analog To Digital Converters (ADC) · SSOP-20-208mil
ADS8344N from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CH0 | input | Analog input channel 0 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 2 | CH1 | input | Analog input channel 1 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 3 | CH2 | input | Analog input channel 2 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 4 | CH3 | input | Analog input channel 3 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 5 | CH4 | input | Analog input channel 4 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 6 | CH5 | input | Analog input channel 5 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 7 | CH6 | input | Analog input channel 6 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 8 | CH7 | input | Analog input channel 7 for single-ended or differential conversion; the datasheet gives an absolute positive-input range of -0.2 V to +VCC + 0.2 V. |
| 9 | COM | passive | Ground reference for the analog inputs that sets the zero-code voltage in single-ended mode; connect to ground or a ground reference point. |
| 10 | SHDN | input | Shutdown input; when LOW the device enters a very low-power shutdown mode. |
| 11 | VREF | power_in | Voltage reference input; the reference can be varied between 500 mV and VCC, giving an input span of 0 V to VREF. |
| 12 | +VCC | power_in | Power supply, 2.7 V to 5 V. |
| 13 | GND | power_in | Ground. |
| 14 | GND | power_in | Ground. |
| 15 | DOUT | tri_state | Serial data output; data is shifted on the falling edge of DCLK, and the output is high impedance when CS is HIGH. |
| 16 | BUSY | tri_state | Busy output; goes LOW while the DIN control bits are being read and while the device is converting, and is high impedance when CS is HIGH. |
| 17 | DIN | input | Serial data input; when CS is LOW, data is latched on the rising edge of DCLK. |
| 18 | CS | input | Active-LOW chip select; data is not clocked into DIN unless CS is LOW, and DOUT is high impedance when CS is HIGH. |
| 19 | DCLK | input | External clock input; the clock speed sets the conversion rate by the equation fDCLK = 24 • fSAMPLE. |
| 20 | +VCC | power_in | Power supply; the device is specified for a single supply of 2.7 V to 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Data Acquisition |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
ADS8344N - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
ads8344n-etched.step/ads8344n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8344n.step/ads8344n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
f74039c3aa69e1c9, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).