component
ADS8341EB
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADS8341EB
Texas Instruments · Analog To Digital Converters (ADC) · SSOP-16-150mil
ADS8341EB from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VCC | power_in | Power supply, 2.7V to 5V. |
| 2 | CH0 | input | Analog input channel 0. |
| 3 | CH1 | input | Analog input channel 1. |
| 4 | CH2 | input | Analog input channel 2. |
| 5 | CH3 | input | Analog input channel 3. |
| 6 | COM | power_in | Ground reference for analog inputs that sets the zero-code voltage in single-ended mode; connect to ground or a ground reference point. |
| 7 | SHDN | input | Shutdown input; when LOW the device enters a very low power shutdown mode. |
| 8 | VREF | power_in | Voltage reference input; the reference range is 0.5V to +VCC per the Electrical Characteristics table. |
| 9 | +VCC | power_in | Power supply, 2.7V to 5V. |
| 10 | GND | power_in | Ground; connect to analog ground. |
| 11 | GND | power_in | Ground; connect to analog ground. |
| 12 | DOUT | tri_state | Serial data output, shifted on the falling edge of DCLK; high impedance when CS is HIGH. |
| 13 | BUSY | tri_state | Busy output; high impedance when CS is HIGH. |
| 14 | DIN | input | Serial data input; data is latched on the rising edge of DCLK when CS is LOW. |
| 15 | CS | input | Chip select input that controls conversion timing and enables the serial input/output register. |
| 16 | DCLK | input | External clock input that runs the SAR conversion and synchronizes serial data I/O; maximum input clock frequency is 2.4MHz for a 100kHz sampling rate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ADS8341EB - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ads8341eb-etched.step/ads8341eb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8341eb.step/ads8341eb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
db2638b107dd3c5e, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).