component
ADS8332IBRGER
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ADS8332IBRGER
Texas Instruments · Analog To Digital Converters (ADC) · VQFN-24-EP(4x4)
ADS8332IBRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN4 | input | Multiplexer analog input channel 4 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 2 | IN5 | input | Multiplexer analog input channel 5 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 3 | IN6 | input | Multiplexer analog input channel 6 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 4 | IN7 | input | Multiplexer analog input channel 7 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 5 | RESET | input | External reset input, active low. |
| 6 | EOC/INT/CDI | output | Programmable status output: end-of-conversion (low during conversion by default) or interrupt (low after conversion, returns high after FS/CS goes low), polarity programmable; also serves as chain data input (CDI) in daisy-chain mode. |
| 7 | SCLK | input | SPI clock for the serial interface; up to 40 MHz when VA = VBD = 5 V. |
| 8 | FS/CS | input | Frame sync signal for DSP serial operation or chip select input for SPI. |
| 9 | SDI | input | SPI serial data input. |
| 10 | SDO | output | SPI serial data output. |
| 11 | DGND | power_in | Digital interface ground; AGND to DGND must stay within -0.3 V to 0.3 V (absolute maximum). |
| 12 | CONVST | input | Conversion start: freezes the sample-and-hold and starts conversion; digital input must stay within DGND -0.3 V to VBD + 0.3 V. |
| 13 | VBD | power_in | Digital interface supply, 1.65 V to VA (recommended range 1.65 V to VA + 0.2 V). |
| 14 | VA | power_in | Analog supply, 2.7 V to 5.5 V. |
| 15 | REF+ | input | External reference input; REF+ absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 16 | REF- | power_in | External reference ground; connect to AGND through an individual via on the printed-circuit board. |
| 17 | AGND | power_in | Analog ground. |
| 18 | ADCIN | input | ADC input; absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 19 | MUXOUT | output | Multiplexer output; absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 20 | COM | input | Common ADC input, usually connected to AGND; absolute voltage range to AGND is -0.3 V to 0.3 V. |
| 21 | IN0 | input | Multiplexer analog input channel 0; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 22 | IN1 | input | Multiplexer analog input channel 1; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 23 | IN2 | input | Multiplexer analog input channel 2; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 24 | IN3 | input | Multiplexer analog input channel 3; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Data Acquisition |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
ADS8332IBRGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm - 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ads8332ibrger-etched.step/ads8332ibrger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8332ibrger.step/ads8332ibrger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (62 pp, sha256
6d4028ed191231f0, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADS8332IBRGER
**Texas Instruments** · Analog To Digital Converters (ADC) · VQFN-24-EP(4x4)
ADS8332IBRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN4 | input | Multiplexer analog input channel 4 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 2 | IN5 | input | Multiplexer analog input channel 5 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 3 | IN6 | input | Multiplexer analog input channel 6 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 4 | IN7 | input | Multiplexer analog input channel 7 on the ADS8332 (listed as IN[0:7] mux input); INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 5 | RESET | input | External reset input, active low. |
| 6 | EOC/INT/CDI | output | Programmable status output: end-of-conversion (low during conversion by default) or interrupt (low after conversion, returns high after FS/CS goes low), polarity programmable; also serves as chain data input (CDI) in daisy-chain mode. |
| 7 | SCLK | input | SPI clock for the serial interface; up to 40 MHz when VA = VBD = 5 V. |
| 8 | FS/CS | input | Frame sync signal for DSP serial operation or chip select input for SPI. |
| 9 | SDI | input | SPI serial data input. |
| 10 | SDO | output | SPI serial data output. |
| 11 | DGND | power_in | Digital interface ground; AGND to DGND must stay within -0.3 V to 0.3 V (absolute maximum). |
| 12 | CONVST | input | Conversion start: freezes the sample-and-hold and starts conversion; digital input must stay within DGND -0.3 V to VBD + 0.3 V. |
| 13 | VBD | power_in | Digital interface supply, 1.65 V to VA (recommended range 1.65 V to VA + 0.2 V). |
| 14 | VA | power_in | Analog supply, 2.7 V to 5.5 V. |
| 15 | REF+ | input | External reference input; REF+ absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 16 | REF- | power_in | External reference ground; connect to AGND through an individual via on the printed-circuit board. |
| 17 | AGND | power_in | Analog ground. |
| 18 | ADCIN | input | ADC input; absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 19 | MUXOUT | output | Multiplexer output; absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 20 | COM | input | Common ADC input, usually connected to AGND; absolute voltage range to AGND is -0.3 V to 0.3 V. |
| 21 | IN0 | input | Multiplexer analog input channel 0; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 22 | IN1 | input | Multiplexer analog input channel 1; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 23 | IN2 | input | Multiplexer analog input channel 2; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 24 | IN3 | input | Multiplexer analog input channel 3; INX absolute voltage range to AGND is -0.3 V to VA + 0.3 V. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24-EP(4x4) |
| Category | Data Acquisition |
| Pins | 25 |
## CAD (KiCad official)
- Symbol: `ADS8332IBRGER`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`
- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `ads8332ibrger-etched.step` / `ads8332ibrger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads8332ibrger.step` / `ads8332ibrger.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads8331) (62 pp, sha256 `6d4028ed191231f0`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ads8332ibrger-datasheet.pdf)