main
Ray Publish 0.1.2 d085fc5
{
  "slug": "ads8168irhbr",
  "version": "0.1.2",
  "type": "component",
  "description": "Texas Instruments Analog To Digital Converters (ADC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "ads8168irhbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads8168irhbr.kicad_sym",
    "ads8168irhbr.kicad_mod",
    "ads8168irhbr.glb",
    "ads8168irhbr.step",
    "ads8168irhbr.lbr",
    "docs/hero.png",
    "docs/ads8168irhbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads8168irhbr-etched.step",
    "ads8168irhbr-hero.glb",
    "ads8168irhbr-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADS8168IRHBR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads8166",
    "parts": {
      "symbol": "ads8168irhbr.kicad_sym",
      "footprint": "ads8168irhbr.kicad_mod",
      "model_3d": "ads8168irhbr-hero.glb",
      "model_3d_plain": "ads8168irhbr.glb",
      "model_3d_step": "ads8168irhbr-etched.step",
      "model_3d_step_plain": "ads8168irhbr.step",
      "lbr": "ads8168irhbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2670858",
      "digikey": "296-ADS8168IRHBRTR-ND",
      "mouser": "595-ADS8168IRHBR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T08:19:57Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-ADS8168IRHBRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-ADS8168IRHBR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for power return and signal reference."
      },
      {
        "number": "2",
        "name": "DECAP",
        "type": "power_out",
        "description": "Internal LDO regulator output nominally 2.85V; connect 1µF decoupling capacitor to GND."
      },
      {
        "number": "3",
        "name": "REFIO",
        "type": "bidirectional",
        "description": "External reference input 2.5V to AVDD - 0.3V or internal 4.096V reference output; connect 1µF decoupling capacitor to GND."
      },
      {
        "number": "4",
        "name": "REFM",
        "type": "power_in",
        "description": "Reference ground potential; short externally to GND."
      },
      {
        "number": "5",
        "name": "REFP",
        "type": "output",
        "description": "Reference buffer output for ADC reference input; short pins 5 and 6 together externally."
      },
      {
        "number": "6",
        "name": "REFP",
        "type": "output",
        "description": "Reference buffer output for ADC reference input; short pins 5 and 6 together externally."
      },
      {
        "number": "7",
        "name": "REFby2",
        "type": "output",
        "description": "Analog output voltage equal to REFP/2 for AC-coupled sensor and DC-biased input applications; connect 1µF decoupling capacitor to GND."
      },
      {
        "number": "8",
        "name": "AIN-COM",
        "type": "input",
        "description": "Common analog input voltage connected to GND for single-ended or REFby2 for pseudo-differential configuration."
      },
      {
        "number": "9",
        "name": "AIN0",
        "type": "input",
        "description": "Analog input channel 0 for 8-channel multiplexer."
      },
      {
        "number": "10",
        "name": "AIN1",
        "type": "input",
        "description": "Analog input channel 1 for 8-channel multiplexer."
      },
      {
        "number": "11",
        "name": "AIN2",
        "type": "input",
        "description": "Analog input channel 2 for 8-channel multiplexer."
      },
      {
        "number": "12",
        "name": "AIN3",
        "type": "input",
        "description": "Analog input channel 3 for 8-channel multiplexer."
      },
      {
        "number": "13",
        "name": "AIN4",
        "type": "input",
        "description": "Analog input channel 4 for 8-channel multiplexer."
      },
      {
        "number": "14",
        "name": "AIN5",
        "type": "input",
        "description": "Analog input channel 5 for 8-channel multiplexer."
      },
      {
        "number": "15",
        "name": "AIN6",
        "type": "input",
        "description": "Analog input channel 6 for 8-channel multiplexer."
      },
      {
        "number": "16",
        "name": "AIN7",
        "type": "input",
        "description": "Analog input channel 7 for 8-channel multiplexer."
      },
      {
        "number": "17",
        "name": "ADC-INP",
        "type": "input",
        "description": "Positive differential analog input to 16-bit SAR ADC converter."
      },
      {
        "number": "18",
        "name": "MUXOUT-P",
        "type": "output",
        "description": "Multiplexer positive output connected to optional buffer amplifier and ADC-INP input."
      },
      {
        "number": "19",
        "name": "MUXOUT-M",
        "type": "output",
        "description": "Multiplexer negative output connected to optional buffer amplifier and ADC-INM input."
      },
      {
        "number": "20",
        "name": "ADC-INM",
        "type": "input",
        "description": "Negative differential analog input to 16-bit SAR ADC converter."
      },
      {
        "number": "21",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for power return and signal reference."
      },
      {
        "number": "22",
        "name": "ALERT",
        "type": "output",
        "description": "Digital alert output active high; logical OR of enabled channel window comparator violations."
      },
      {
        "number": "23",
        "name": "CS",
        "type": "input",
        "description": "Chip select input active low; device starts converting on rising edge and controls SDO tri-state when low."
      },
      {
        "number": "24",
        "name": "SDI",
        "type": "input",
        "description": "Serial data input pin for SPI interface supporting up to 50MHz clock frequency."
      },
      {
        "number": "25",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input for SPI-compatible interface timing all data transfers at up to 50MHz."
      },
      {
        "number": "26",
        "name": "SDO-0",
        "type": "tri_state",
        "description": "Serial data output 0 with high-impedance state when CS is high; carries MSB-1, MSB-3, ..., LSB bits."
      },
      {
        "number": "27",
        "name": "SDO-1/SEQSTS",
        "type": "tri_state",
        "description": "Multifunction tri-state output carrying sequence status in auto/custom modes or SDO-1 data in dual SDO mode; high-impedance when CS is high."
      },
      {
        "number": "28",
        "name": "READY",
        "type": "output",
        "description": "Multifunction output indicating conversion status when CS is high or output protocol strobe when CS is low."
      },
      {
        "number": "29",
        "name": "RST",
        "type": "input",
        "description": "Asynchronous reset input active low pulse; resets device and returns all register bits to default states."
      },
      {
        "number": "30",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital interface power supply 1.65V to 5.5V; connect 1µF decoupling capacitor to GND."
      },
      {
        "number": "31",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for power return and signal reference."
      },
      {
        "number": "32",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply 3V to 5.5V for external reference or 4.5V to 5.5V for internal reference; connect 1µF decoupling capacitor to GND."
      },
      {
        "number": "33",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DECAP pin type marked as power_out (LDO output) rather than power_in; verify if this is the correct ; REFP pins are identical (pins 5 and 6 must be shorted together externally per datasheet); verify if ; Thermal pad (Thermal pad) classification as power_in is based on GND connection requirement; alterna",
          "exposed pad 33 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 86,
        "cost_usd": 0.847,
        "at": "2026-09-27T08:19:39"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads8166",
        "pages": 86,
        "sha256": "fa97ed7844ff4a62",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads8168irhbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads8168irhbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "73aeed897fd92ebe3b5c21bd8b3fa87ac83df2c90bd22d2b31c80e7c91659f48",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "ADS8168IRHBR",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-32-EP(5x5)",
      "Category": "Data Acquisition",
      "Pins": "33"
    }
  },
  "discovery_triggers": [
    "ads8168irhbr"
  ],
  "discovery_pitch": "ADS8168IRHBR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}