component
ADS8167IRHBR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS8167IRHBR
Texas Instruments · Analog To Digital Converters (ADC) · VQFN-32-EP(5x5)
ADS8167IRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; one of three GND pins (1, 21, 31) that must be connected to the system ground. |
| 2 | DECAP | power_in | Connect a 1µF capacitor to GND for the internal power supply. |
| 3 | REFIO | bidirectional | External reference voltage input; the internal reference is a 4.096V output, and a 1µF capacitor must be connected from this pin to GND. |
| 4 | REFM | passive | Reference ground potential; short this pin to GND externally. |
| 5 | REFP | bidirectional | Reference buffer output and ADC reference input; short pins 5 and 6 together. |
| 6 | REFP | bidirectional | Reference buffer output and ADC reference input; short pins 5 and 6 together. |
| 7 | REFby2 | output | Output voltage equals half the voltage on the REFP pin; connect a 1µF capacitor from this pin to GND. |
| 8 | AIN-COM | passive | Common analog input; connect to GND for single-ended operation or to REFby2 for pseudo-differential operation, as set by the COM_CFG register. |
| 9 | AIN0 | passive | Analog input channel 0. |
| 10 | AIN1 | passive | Analog input channel 1. |
| 11 | AIN2 | passive | Analog input channel 2. |
| 12 | AIN3 | passive | Analog input channel 3. |
| 13 | AIN4 | passive | Analog input channel 4. |
| 14 | AIN5 | passive | Analog input channel 5. |
| 15 | AIN6 | passive | Analog input channel 6. |
| 16 | AIN7 | passive | Analog input channel 7. |
| 17 | ADC-INP | passive | Positive ADC analog input. |
| 18 | MUXOUT-P | output | MUX positive analog output. |
| 19 | MUXOUT-M | output | MUX negative analog output. |
| 20 | ADC-INM | passive | Negative ADC analog input. |
| 21 | GND | power_in | Ground pin; one of three GND pins (1, 21, 31) that must be connected to the system ground. |
| 22 | ALERT | output | Digital ALERT output, active high; it is the logical OR of the enabled channel ALERTs. |
| 23 | CS | input | Active-low chip-select; the device starts converting the active channel on the rising edge of CS, and the SDO-x pins go Hi-Z when CS is high. |
| 24 | SDI | input | Serial data input that transfers data or commands into the device. |
| 25 | SCLK | input | Clock input for the serial interface; all system-synchronous data transfer protocols are timed with respect to SCLK. |
| 26 | SDO-0 | output | Serial communication data output 0. |
| 27 | SDO-1/SEQSTS | output | Multifunction output: by default indicates channel scanning status in auto and custom sequence modes, and functions as serial data output SDO-1 in dual SDO mode. |
| 28 | READY | output | Multifunction output that reflects conversion status when CS is high, going low while a conversion is in process. |
| 29 | RST | input | Asynchronous reset input; a low pulse resets the device and returns all register bits to their default states. |
| 30 | DVDD | power_in | Interface power supply pin, with DVDD range of 1.65V to 5.5V; connect a 1µF capacitor from this pin to GND. |
| 31 | GND | power_in | Ground pin; one of three GND pins (1, 21, 31) that must be connected to the system ground. |
| 32 | AVDD | power_in | Analog power supply pin, with AVDD range of 3V to 5.5V; connect a 1µF capacitor from this pin to GND. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Data Acquisition |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
ADS8167IRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
ads8167irhbr-etched.step/ads8167irhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8167irhbr.step/ads8167irhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
fa97ed7844ff4a62, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).