← Commit history

Initial commit: component/ads7863arget

Ray ·1b5fe049dd ·
2 files changed +320
README.mdadded+61
@@ -0,0 +1,61 @@+# ADS7863ARGET++**Texas Instruments** · Analog To Digital Converters (ADC) · VQFN-24-EP(4x4)++ADS7863ARGET from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CHA0- | input | Inverting analog input channel A0 with differential input range of ±VREF referenced to AGND. |+| 2 | REFIN | input | Reference voltage input requiring minimum 470-nF ceramic capacitor to AGND; unbuffered, code-dependent input impedance. |+| 3 | REFOUT | output | Programmable internal voltage reference output adjustable from 0.5V to 2.525V in 2.44-mV steps via serial interface. |+| 4 | AGND | power_in | Analog ground reference; connect to analog ground plane with minimum inductance paths. |+| 5 | AVDD | power_in | Analog power supply, 2.7V to 5.5V nominal, requires 1-μF ceramic capacitor decoupling to AGND. |+| 6 | M1 | input | Mode pin 1 selecting serial output format; high selects both SDOA and SDOB active, low selects SDOA only. |+| 7 | M0 | input | Mode pin 0 selecting channel selection method; low enables manual via SDI C[1:0] bits, high enables automatic cycling. |+| 8 | SDI | input | Serial data input for device configuration and internal reference DAC control; 12-bit word length, MSB-first, clocked on falling CLOCK edge. |+| 9 | CONVST | input | Conversion start input; rising edge triggers ADC sample-to-hold transition independent of CLOCK, conversion begins on next CLOCK rising edge. |+| 10 | RD | input | Read data synchronization pulse for SDOx serial outputs and SDI input latch; minimum 10-ns setup time to CLOCK falling edge, active only when CS is low. |+| 11 | CS | input | Chip select; when low, SDOx outputs are active; when high, SDOx outputs enter high-impedance 3-state condition. |+| 12 | CLOCK | input | External clock input, 1MHz to 32MHz frequency range; 50% duty cycle nominal, 30-70% duty cycle acceptable. |+| 13 | BUSY | output | ADC busy indicator output; goes high when inputs enter hold mode and returns low after conversion completion; indicates when data results are valid. |+| 14 | SDOB | tri_state | Serial data output for converter B; data valid on falling CLOCK edge with format 0,12-bit result,00; 3-states when CS is high or M1 is low. |+| 15 | SDOA | tri_state | Serial data output for converter A; data valid on falling CLOCK edge with format 0,12-bit result,00; 3-states when CS is high or M1 is low. |+| 16 | BVDD | power_in | Digital I/O supply voltage, 2.7V to 5.5V, requires 1-μF ceramic capacitor decoupling to BGND. |+| 17 | BGND | power_in | Digital I/O ground reference; connect to digital ground plane with minimum inductance paths. |+| 18 | CHB1+ | input | Noninverting analog input channel B1 with differential input range of ±VREF referenced to AGND. |+| 19 | CHB1- | input | Inverting analog input channel B1 with differential input range of ±VREF referenced to AGND. |+| 20 | CHB0+ | input | Noninverting analog input channel B0 with differential input range of ±VREF referenced to AGND. |+| 21 | CHB0- | input | Inverting analog input channel B0 with differential input range of ±VREF referenced to AGND. |+| 22 | CHA1+ | input | Noninverting analog input channel A1 with differential input range of ±VREF referenced to AGND. |+| 23 | CHA1- | input | Inverting analog input channel A1 with differential input range of ±VREF referenced to AGND. |+| 24 | CHA0+ | input | Noninverting analog input channel A0 with differential input range of ±VREF referenced to AGND. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Data Acquisition |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `ADS7863ARGET`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ads7863arget-etched.step` / `ads7863arget-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads7863arget.step` / `ads7863arget.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads7863a) (39 pp, sha256 `01e4892c842b09b8`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads7863arget-datasheet.pdf)
page.jsonadded+259
@@ -0,0 +1,259 @@+{+  "slug": "ads7863arget",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads7863arget",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads7863arget.kicad_sym",+    "ads7863arget.kicad_mod",+    "ads7863arget.glb",+    "ads7863arget.step",+    "ads7863arget.lbr",+    "docs/hero.png",+    "docs/ads7863arget-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS7863ARGET",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads7863a",+    "parts": {+      "symbol": "ads7863arget.kicad_sym",+      "footprint": "ads7863arget.kicad_mod",+      "model_3d": "ads7863arget-etched.glb",+      "model_3d_plain": "ads7863arget.glb",+      "model_3d_step": "ads7863arget-etched.step",+      "model_3d_step_plain": "ads7863arget.step",+      "lbr": "ads7863arget.lbr"+    },+    "distributor_links": {+      "lcsc": "C2870160",+      "digikey": "296-37239-2-ND",+      "mouser": "595-ADS7863ARGET"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T01:49:03Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-37239-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-ADS7863ARGET",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "CHA0–",+        "type": "input",+        "description": "Inverting analog input channel A0 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "2",+        "name": "REFIN",+        "type": "input",+        "description": "Reference voltage input requiring minimum 470-nF ceramic capacitor to AGND; unbuffered, code-dependent input impedance."+      },+      {+        "number": "3",+        "name": "REFOUT",+        "type": "output",+        "description": "Programmable internal voltage reference output adjustable from 0.5V to 2.525V in 2.44-mV steps via serial interface."+      },+      {+        "number": "4",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground reference; connect to analog ground plane with minimum inductance paths."+      },+      {+        "number": "5",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply, 2.7V to 5.5V nominal, requires 1-μF ceramic capacitor decoupling to AGND."+      },+      {+        "number": "6",+        "name": "M1",+        "type": "input",+        "description": "Mode pin 1 selecting serial output format; high selects both SDOA and SDOB active, low selects SDOA only."+      },+      {+        "number": "7",+        "name": "M0",+        "type": "input",+        "description": "Mode pin 0 selecting channel selection method; low enables manual via SDI C[1:0] bits, high enables automatic cycling."+      },+      {+        "number": "8",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input for device configuration and internal reference DAC control; 12-bit word length, MSB-first, clocked on falling CLOCK edge."+      },+      {+        "number": "9",+        "name": "CONVST",+        "type": "input",+        "description": "Conversion start input; rising edge triggers ADC sample-to-hold transition independent of CLOCK, conversion begins on next CLOCK rising edge."+      },+      {+        "number": "10",+        "name": "RD",+        "type": "input",+        "description": "Read data synchronization pulse for SDOx serial outputs and SDI input latch; minimum 10-ns setup time to CLOCK falling edge, active only when CS is low."+      },+      {+        "number": "11",+        "name": "CS",+        "type": "input",+        "description": "Chip select; when low, SDOx outputs are active; when high, SDOx outputs enter high-impedance 3-state condition."+      },+      {+        "number": "12",+        "name": "CLOCK",+        "type": "input",+        "description": "External clock input, 1MHz to 32MHz frequency range; 50% duty cycle nominal, 30-70% duty cycle acceptable."+      },+      {+        "number": "13",+        "name": "BUSY",+        "type": "output",+        "description": "ADC busy indicator output; goes high when inputs enter hold mode and returns low after conversion completion; indicates when data results are valid."+      },+      {+        "number": "14",+        "name": "SDOB",+        "type": "tri_state",+        "description": "Serial data output for converter B; data valid on falling CLOCK edge with format 0,12-bit result,00; 3-states when CS is high or M1 is low."+      },+      {+        "number": "15",+        "name": "SDOA",+        "type": "tri_state",+        "description": "Serial data output for converter A; data valid on falling CLOCK edge with format 0,12-bit result,00; 3-states when CS is high or M1 is low."+      },+      {+        "number": "16",+        "name": "BVDD",+        "type": "power_in",+        "description": "Digital I/O supply voltage, 2.7V to 5.5V, requires 1-μF ceramic capacitor decoupling to BGND."+      },+      {+        "number": "17",+        "name": "BGND",+        "type": "power_in",+        "description": "Digital I/O ground reference; connect to digital ground plane with minimum inductance paths."+      },+      {+        "number": "18",+        "name": "CHB1+",+        "type": "input",+        "description": "Noninverting analog input channel B1 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "19",+        "name": "CHB1–",+        "type": "input",+        "description": "Inverting analog input channel B1 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "20",+        "name": "CHB0+",+        "type": "input",+        "description": "Noninverting analog input channel B0 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "21",+        "name": "CHB0–",+        "type": "input",+        "description": "Inverting analog input channel B0 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "22",+        "name": "CHA1+",+        "type": "input",+        "description": "Noninverting analog input channel A1 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "23",+        "name": "CHA1–",+        "type": "input",+        "description": "Inverting analog input channel A1 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "24",+        "name": "CHA0+",+        "type": "input",+        "description": "Noninverting analog input channel A0 with differential input range of ±VREF referenced to AGND."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 39,+        "cost_usd": 0.4388,+        "at": "2026-09-27T01:48:45"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads7863a",+        "pages": 39,+        "sha256": "01e4892c842b09b8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file