component
ADS7822U
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS7822U
Texas Instruments · Analog To Digital Converters (ADC) · SOIC-8
ADS7822U from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | Reference voltage input; acceptable range 50mV to VCC sets the full-scale analog input range. |
| 2 | +In | input | Noninverting analog input; operating range must be maintained within GND-200mV to VCC+200mV for proper linearity. |
| 3 | -In | input | Inverting analog input with operating range of GND-200mV to GND+1.0V; connect to local ground or remote ground sense reference. |
| 4 | GND | power_in | Ground reference for all analog and digital circuits. |
| 5 | CS/SHDN | input | Chip select (active low) that initiates conversion on falling edge; high level activates shutdown mode with 3μA maximum quiescent current. |
| 6 | DOUT | tri_state | Serial data output transmitting 12-bit conversion result MSB-first on DCLOCK falling edge; tri-states when CS is high. |
| 7 | DCLOCK | input | Data clock input synchronizing serial data output; operating frequency range 10kHz to 3.2MHz maximum. |
| 8 | +VCC | power_in | Power supply input with operating range 2.0V to 5.25V; specified performance guaranteed over 2.7V to 5.25V range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADS7822U - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ads7822u-etched.step/ads7822u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads7822u.step/ads7822u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
889c901a1116a5b2, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).