component
ADS7043IDCUT
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# ADS7043IDCUT++**Texas Instruments** · Analog To Digital Converters (ADCs) · VSSOP-8-0.5mm++ADS7043IDCUT from Texas Instruments, in a VSSOP-8-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DVDD | power_in | Digital I/O supply voltage, specified at 1.65 V to 3.6 V and independent of AVDD. |+| 2 | SCLK | input | Serial clock input used for both conversion and data transfer; a 16 MHz SCLK supports 1 MSPS throughput. |+| 3 | SDO | output | Serial data output that carries the conversion result, with the bus returned to 3-state when CS goes high. |+| 4 | CS | input | Active-low chip select; the CS falling edge samples the analog input and starts conversion, and the rising edge ends the frame. |+| 5 | AINM | input | Negative analog signal input for the pseudo-differential input, which the datasheet specifies to be within AVDD/2 ± 100 mV. |+| 6 | AINP | input | Positive analog signal input, which the datasheet specifies to accept signals from 0 V to AVDD. |+| 7 | AVDD | power_in | Analog power supply input specified at 1.65 V to 3.6 V, which also provides the ADC reference voltage. |+| 8 | GND | power_in | Ground for the power supply; all analog and digital signals are referred to this pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8-0.5mm |+| Category | ADC/DAC/Data Conversion |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `ADS7043IDCUT`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8-0.5mm (KiCad packages3D, STEP)+- 3D model files: `ads7043idcut-etched.step` / `ads7043idcut-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads7043idcut.step` / `ads7043idcut.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads7043) (42 pp, sha256 `26f6377cba7f518b`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads7043idcut-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "ads7043idcut",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "adc-dac-data conversion",+ "ads7043idcut",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads7043idcut.kicad_sym",+ "ads7043idcut.kicad_mod",+ "ads7043idcut.glb",+ "ads7043idcut.step",+ "ads7043idcut.lbr",+ "docs/hero.png",+ "docs/ads7043idcut-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads7043idcut-hero.glb",+ "ads7043idcut-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS7043IDCUT",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8-0.5mm",+ "pin_count": 8,+ "category": "ADC/DAC/Data Conversion",+ "subcategory": "Analog To Digital Converters (ADCs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads7043",+ "parts": {+ "symbol": "ads7043idcut.kicad_sym",+ "footprint": "ads7043idcut.kicad_mod",+ "model_3d": "ads7043idcut-hero.glb",+ "model_3d_plain": "ads7043idcut.glb",+ "model_3d_step": "ads7043idcut-etched.step",+ "model_3d_step_plain": "ads7043idcut.step",+ "lbr": "ads7043idcut.lbr"+ },+ "distributor_links": {+ "lcsc": "C1879630",+ "digikey": "296-ADS7043IDCUTTR-ND",+ "mouser": "595-ADS7043IDCUT"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:06:02Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-ADS7043IDCUTTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-ADS7043IDCUT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "DVDD",+ "type": "power_in",+ "description": "Digital I/O supply voltage, specified at 1.65 V to 3.6 V and independent of AVDD."+ },+ {+ "number": "2",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input used for both conversion and data transfer; a 16 MHz SCLK supports 1 MSPS throughput."+ },+ {+ "number": "3",+ "name": "SDO",+ "type": "output",+ "description": "Serial data output that carries the conversion result, with the bus returned to 3-state when CS goes high."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select; the CS falling edge samples the analog input and starts conversion, and the rising edge ends the frame."+ },+ {+ "number": "5",+ "name": "AINM",+ "type": "input",+ "description": "Negative analog signal input for the pseudo-differential input, which the datasheet specifies to be within AVDD/2 ± 100 mV."+ },+ {+ "number": "6",+ "name": "AINP",+ "type": "input",+ "description": "Positive analog signal input, which the datasheet specifies to accept signals from 0 V to AVDD."+ },+ {+ "number": "7",+ "name": "AVDD",+ "type": "power_in",+ "description": "Analog power supply input specified at 1.65 V to 3.6 V, which also provides the ADC reference voltage."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground for the power supply; all analog and digital signals are referred to this pin."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet pin table gives the DCU (8-pin leaded VSSOP) pinout, and the ordering table lists ADS7; The datasheet has no KiCad analog pin class. AINP and AINM are typed as input, which follows the dat; Pin descriptions for AINM, AINP and AVDD use the input ranges from the Absolute Maximum Ratings, Rec"+ ],+ "pages_sent": 15,+ "cost_usd": 0.0609,+ "at": "2026-10-07T22:05:47"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads7043",+ "pages": 42,+ "sha256": "26f6377cba7f518b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads7043idcut.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads7043idcut-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "0429e776514405591bd10f4cd224c3ec388a051ca214529be392bba60efa9763",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}