main
Ray Publish 0.1.2 6d1a95b
{
  "schema_version": 1,
  "type": "component",
  "slug": "ads6244irgzr",
  "title": "ADS6244IRGZR",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.2",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ads6244irgzr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADS6244IRGZR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads6244",
    "parts": {
      "symbol": "ads6244irgzr.kicad_sym",
      "footprint": "ads6244irgzr.kicad_mod",
      "model_3d": "ads6244irgzr-hero.glb",
      "model_3d_plain": "ads6244irgzr.glb",
      "model_3d_step": "ads6244irgzr-etched.step",
      "model_3d_step_plain": "ads6244irgzr.step",
      "lbr": "ads6244irgzr.lbr"
    },
    "distributor_links": {
      "lcsc": "C1543598",
      "digikey": "ADS6244IRGZR-ND",
      "mouser": "595-ADS6244IRGZR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T05:20:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADS6244IRGZR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-ADS6244IRGZR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LGND",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "2",
        "name": "LVDD",
        "type": "power_in",
        "description": "Digital power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "3",
        "name": "CAP",
        "type": "passive",
        "description": "Connect 2nF capacitor from pin to ground."
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "input",
        "description": "Serial interface reset input; apply high-going pulse in serial mode to initialize internal registers or tie permanently high in parallel mode; has internal pull-down resistor."
      },
      {
        "number": "5",
        "name": "LVDD",
        "type": "power_in",
        "description": "Digital power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "7",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "8",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "9",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "10",
        "name": "INA_M",
        "type": "input",
        "description": "Differential input signal pair channel A minus; must tie to VCM if unused to avoid floating."
      },
      {
        "number": "11",
        "name": "INA_P",
        "type": "input",
        "description": "Differential input signal pair channel A plus; must tie to VCM if unused to avoid floating."
      },
      {
        "number": "12",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "13",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "Do not connect."
      },
      {
        "number": "15",
        "name": "CFG4",
        "type": "input",
        "description": "Parallel input pin controlling data format (MSB/LSB first) and 2s complement/offset binary mode selection per Table 12."
      },
      {
        "number": "16",
        "name": "VCM",
        "type": "bidirectional",
        "description": "Common-mode voltage output in internal reference mode or reference voltage input (1.45V to 1.55V) in external reference mode."
      },
      {
        "number": "17",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "18",
        "name": "CLKP",
        "type": "input",
        "description": "Differential input clock pair plus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude."
      },
      {
        "number": "19",
        "name": "CLKM",
        "type": "input",
        "description": "Differential input clock pair minus with 0.4Vpp to 1.5Vpp sine wave, ±0.8Vpp LVPECL, ±0.35Vpp LVDS, or 3.3Vpp LVCMOS amplitude."
      },
      {
        "number": "20",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "21",
        "name": "CFG3",
        "type": "input",
        "description": "Reserved pin, must tie to ground."
      },
      {
        "number": "22",
        "name": "CFG2",
        "type": "input",
        "description": "Parallel input pin controlling 14x/16x serialization and SDR bit clock capture edge selection per Table 10."
      },
      {
        "number": "23",
        "name": "CFG1",
        "type": "input",
        "description": "Parallel input pin controlling 1-wire/2-wire interface and DDR/SDR bit clock selection; tie to AVDD for 2-wire interface with DDR bit clock per Table 9."
      },
      {
        "number": "24",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "25",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "26",
        "name": "INB_P",
        "type": "input",
        "description": "Differential input signal pair channel B plus; must tie to VCM if unused to avoid floating."
      },
      {
        "number": "27",
        "name": "INB_M",
        "type": "input",
        "description": "Differential input signal pair channel B minus; must tie to VCM if unused to avoid floating."
      },
      {
        "number": "28",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "29",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "30",
        "name": "PDNB",
        "type": "input",
        "description": "Channel B ADC power down control pin; assert high to power down channel B."
      },
      {
        "number": "31",
        "name": "PDNA",
        "type": "input",
        "description": "Channel A ADC power down control pin; assert high to power down channel A."
      },
      {
        "number": "32",
        "name": "SEN",
        "type": "input",
        "description": "Serial interface enable input when RESET is low; controls coarse gain and internal/external reference mode when RESET is high; has internal pull-up resistor."
      },
      {
        "number": "33",
        "name": "SDATA",
        "type": "input",
        "description": "Serial interface data input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor."
      },
      {
        "number": "34",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock input when RESET is low; controls SYNC/DESKEW/global power down when RESET is high per Table 5; has internal pull-down resistor."
      },
      {
        "number": "35",
        "name": "LGND",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "36",
        "name": "LVDD",
        "type": "power_in",
        "description": "Digital power supply with operating range 3.0V to 3.6V."
      },
      {
        "number": "37",
        "name": "DB1_P",
        "type": "output",
        "description": "Channel B differential LVDS data output pair wire 1, positive; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "38",
        "name": "DB1_M",
        "type": "output",
        "description": "Channel B differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "39",
        "name": "DB0_P",
        "type": "output",
        "description": "Channel B differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "40",
        "name": "DB0_M",
        "type": "output",
        "description": "Channel B differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "41",
        "name": "FCLKP",
        "type": "output",
        "description": "Differential frame clock output pair, plus; serialized output with programmable termination."
      },
      {
        "number": "42",
        "name": "FCLKM",
        "type": "output",
        "description": "Differential frame clock output pair, minus; serialized output with programmable termination."
      },
      {
        "number": "43",
        "name": "DCLKP",
        "type": "output",
        "description": "Differential bit clock output pair, plus; derived from internal PLL multiplying input clock."
      },
      {
        "number": "44",
        "name": "DCLKM",
        "type": "output",
        "description": "Differential bit clock output pair, minus; derived from internal PLL multiplying input clock."
      },
      {
        "number": "45",
        "name": "DA1_P",
        "type": "output",
        "description": "Channel A differential LVDS data output pair wire 1, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "46",
        "name": "DA1_M",
        "type": "output",
        "description": "Channel A differential LVDS data output pair wire 1, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "47",
        "name": "DA0_P",
        "type": "output",
        "description": "Channel A differential LVDS data output pair wire 0, plus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "48",
        "name": "DA0_M",
        "type": "output",
        "description": "Channel A differential LVDS data output pair wire 0, minus; output maximum 10pF load capacitance without internal termination or 10pF with internal termination."
      },
      {
        "number": "49",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Device supports configurable 1-wire and 2-wire output interface modes. Pinout extracted is for 2-wir; The VCM pin (16) functions as output in internal reference mode but as input in external reference m",
          "exposed pad 49 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 18,
        "cost_usd": 0.2076,
        "at": "2026-10-01T05:20:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads6244",
        "pages": 76,
        "sha256": "fc1d51fd33d78c79",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads6244irgzr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads6244irgzr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2edcec0af8fe70f6283cbb92bb7a05a6de3ced5f272fc691c78c6e8200a893b8",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "QFN-48-EP(7x7)",
      "Category": "Data Acquisition",
      "Pins": "49"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ads6244irgzr"
  ],
  "discovery_pitch": "ADS6244IRGZR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads6244irgzr.kicad_sym",
    "ads6244irgzr.kicad_mod",
    "ads6244irgzr.glb",
    "ads6244irgzr.step",
    "ads6244irgzr.lbr",
    "docs/hero.png",
    "docs/ads6244irgzr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads6244irgzr-etched.step",
    "ads6244irgzr-hero.glb",
    "ads6244irgzr-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Analog To Digital Converters (ADC), QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}