main
Ray Publish 0.1.2 3726307
{
  "schema_version": 1,
  "type": "component",
  "slug": "ads131m02ipwr",
  "title": "ADS131M02IPWR",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.2",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ads131m02ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADS131M02IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads131m02",
    "parts": {
      "symbol": "ads131m02ipwr.kicad_sym",
      "footprint": "ads131m02ipwr.kicad_mod",
      "model_3d": "ads131m02ipwr-hero.glb",
      "model_3d_plain": "ads131m02ipwr.glb",
      "model_3d_step": "ads131m02ipwr-etched.step",
      "model_3d_step_plain": "ads131m02ipwr.step",
      "lbr": "ads131m02ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2922448"
    },
    "pins": [
      {
        "number": "1",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog supply voltage (2.7V to 3.6V nominal in normal operating modes; 2.4V to 3.6V in standby/current-detect modes); connect a 1-µF capacitor to AGND."
      },
      {
        "number": "2",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog supply ground."
      },
      {
        "number": "3",
        "name": "AIN0P",
        "type": "input",
        "description": "Positive analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."
      },
      {
        "number": "4",
        "name": "AIN0N",
        "type": "input",
        "description": "Negative analog input channel 0; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."
      },
      {
        "number": "5",
        "name": "AIN1N",
        "type": "input",
        "description": "Negative analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."
      },
      {
        "number": "6",
        "name": "AIN1P",
        "type": "input",
        "description": "Positive analog input channel 1; differential input voltage range ±VREF/Gain (VREF = 1.2V) with absolute input AGND - 1.3V to AVDD (gain 1-4) or AGND - 1.3V to AVDD - 1.8V (gain 8-128)."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "11",
        "name": "SYNC/RESET",
        "type": "input",
        "description": "Active-low digital input for synchronization (pulse duration 1-2047 tCLKIN) or system reset (pulse duration ≥2048 tCLKIN); enables alignment of conversions with external events or hardware reset."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select digital input; device ignores all SPI communication and DOUT remains high impedance when CS is high."
      },
      {
        "number": "13",
        "name": "DRDY",
        "type": "output",
        "description": "Active-low digital output indicating new ADC conversion data available in conversion mode or current-detect threshold conditions met in current-detect mode."
      },
      {
        "number": "14",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock digital input (SPI mode CPOL=0, CPHA=1); output data transition on SCLK rising edge, input data latched on falling edge."
      },
      {
        "number": "15",
        "name": "DOUT",
        "type": "tri_state",
        "description": "Serial data output (SPI MISO); shifts ADC conversion data and command responses on SCLK rising edges when CS is low; assumes high-impedance state when CS is high."
      },
      {
        "number": "16",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input (SPI MOSI); serial commands shifted in on SCLK falling edges when CS is low."
      },
      {
        "number": "17",
        "name": "CLKIN",
        "type": "input",
        "description": "Master clock input (LVCMOS); required frequency 0.3-8.4 MHz (HR mode), 0.3-4.15 MHz (LP mode), or 0.3-2.08 MHz (VLP mode) with 40-60% duty cycle; modulator frequency fMOD = fCLKIN / 2."
      },
      {
        "number": "18",
        "name": "CAP",
        "type": "power_out",
        "description": "Analog output from internal digital LDO regulator (nominally 1.8V); connect a 220-nF capacitor to DGND."
      },
      {
        "number": "19",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital supply ground."
      },
      {
        "number": "20",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital I/O supply voltage (1.8V or 3.3V supported; 2.7V to 3.6V normal operating, 1.65V to 2.0V if CAP tied to DVDD); connect a 1-µF capacitor to DGND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 95,
        "cost_usd": 0.5897,
        "at": "2026-09-17T21:24:16"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads131m02",
        "pages": 95,
        "sha256": "6165dbb0c979f300",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads131m02ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads131m02ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b1c58ea9911ef2db8b2bdfca8fc846fde6bdfc408a91b3833b430e90aba64faf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Data Acquisition",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ads131m02ipwr"
  ],
  "discovery_pitch": "ADS131M02IPWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads131m02ipwr.kicad_sym",
    "ads131m02ipwr.kicad_mod",
    "ads131m02ipwr.glb",
    "ads131m02ipwr.step",
    "ads131m02ipwr.lbr",
    "docs/hero.png",
    "docs/ads131m02ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads131m02ipwr-etched.step",
    "ads131m02ipwr-hero.glb",
    "ads131m02ipwr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-24T15:59:40.436Z",
  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}