component
ADS1292RIRSMR
Public Made by Adomby adom
Texas Instruments Analog Front End (AFE), QFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS1292RIRSMR
Texas Instruments · Analog Front End (AFE) · QFN-32-EP(4x4)
ADS1292RIRSMR from Texas Instruments, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGA1N | output | PGA1 inverting output |
| 2 | PGA1P | output | PGA1 noninverting output |
| 3 | IN1N | input | Differential analog negative input 1; connect unused analog inputs to AVDD |
| 4 | IN1P | input | Differential analog positive input 1; connect unused analog inputs to AVDD |
| 5 | IN2N | input | Differential analog negative input 2; connect unused analog inputs to AVDD |
| 6 | IN2P | input | Differential analog positive input 2; connect unused analog inputs to AVDD |
| 7 | PGA2N | output | PGA2 inverting output |
| 8 | PGA2P | output | PGA2 noninverting output |
| 9 | VREFP | bidirectional | Positive reference voltage |
| 10 | VREFN | input | Negative reference voltage; must be connected to AVSS |
| 11 | VCAP1 | passive | Analog bypass capacitor |
| 12 | AVDD | power_in | Analog supply |
| 13 | AVSS | power_in | Analog ground |
| 14 | CLKSEL | input | Master clock select |
| 15 | PWDN/RESET | input | Power-down or system reset; active low |
| 16 | START | input | Start conversion |
| 17 | CLK | input | Master clock input |
| 18 | CS | input | Chip select |
| 19 | DIN | input | SPI data in |
| 20 | SCLK | input | SPI clock |
| 21 | DOUT | output | SPI data out |
| 22 | DRDY | output | Data ready; active low |
| 23 | DVDD | power_in | Digital power supply |
| 24 | DGND | power_in | Digital ground |
| 25 | GPIO2/RCLK2 | bidirectional | General-purpose I/O 2 or resp clock 2 (ADS1292R) |
| 26 | GPIO1/RCLK1 | bidirectional | General-purpose I/O 1 or resp clock 1 (ADS1292R) |
| 27 | VCAP2 | passive | Analog bypass capacitor |
| 28 | RLDINV | input | Right leg drive inverting input; connect to AVDD if not used |
| 29 | RLDIN/RLDREF | input | Right leg drive input to MUX or RLD amplifier noninverting input; connect to AVDD if not used |
| 30 | RLDOUT | output | Right leg drive output |
| 31 | RESP_MODP/IN3P | bidirectional | P-side respiration excitation signal for respiration (analog output) or auxiliary input 3P (analog input); connect unused analog inputs to AVDD |
| 32 | RESP_MODN/IN3N | bidirectional | N-side respiration excitation signal for respiration (analog output) or auxiliary input 3N (analog input); connect unused analog inputs to AVDD |
| 33 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | QFN-32-EP(4x4) |
| Category | Data Acquisition |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
ADS1292RIRSMR - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
ads1292rirsmr-etched.step/ads1292rirsmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1292rirsmr.step/ads1292rirsmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (83 pp, sha256
82b2aac52bf182df, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).