component
ADS1271IBPWR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), TSSOP-16-175mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS1271IBPWR
Texas Instruments · Analog To Digital Converters (ADC) · TSSOP-16-175mil
ADS1271IBPWR from Texas Instruments, in a TSSOP-16-175mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AINP | input | Positive analog input; input impedance 16.4kΩ in High-Speed/High-Resolution modes or 32.8kΩ in Low-Power mode. |
| 2 | AINN | input | Negative analog input; input impedance 16.4kΩ in High-Speed/High-Resolution modes or 32.8kΩ in Low-Power mode. |
| 3 | AGND | power_in | Analog ground. |
| 4 | AVDD | power_in | Analog supply voltage, range 4.75V to 5.25V (nominal 5V). |
| 5 | MODE | input | Mode selection input: 0=High-Speed (105kSPS), float=High-Resolution (109dB SNR), 1=Low-Power (35mW). |
| 6 | FORMAT | input | Interface format selection: 0=SPI, float=Modulator output (ADS1271B only), 1=Frame-Sync. |
| 7 | SYNC/PDWN | input | Synchronization (pulse low) or power-down (hold low ≥219 CLK periods) control, active low. |
| 8 | DIN | input | Serial data input for daisy-chaining; latched on falling edge of SCLK. |
| 9 | DOUT | output | Serial data output (ADC or modulator output); shifts MSB-first on falling edge of SCLK. |
| 10 | DRDY/FSYNC | bidirectional | Data ready output in SPI mode or frame-sync input in Frame-Sync mode; mode-dependent function. |
| 11 | SCLK | input | Serial clock input for data retrieval in SPI and Frame-Sync modes; becomes modulator clock output in modulator mode. |
| 12 | CLK | input | Master clock input, operating range 0.1MHz to 27MHz; crystal oscillator recommended. |
| 13 | DVDD | power_in | Digital supply voltage, range 1.65V to 3.6V (1.8V recommended). |
| 14 | DGND | power_in | Digital ground. |
| 15 | VREFN | input | Negative reference input; valid operating range depends on device grade (ADS1271 or ADS1271B). |
| 16 | VREFP | input | Positive reference input; valid operating range depends on device grade (ADS1271 or ADS1271B). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16-175mil |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ADS1271IBPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16-175mil (KiCad packages3D, STEP)
- 3D model files:
ads1271ibpwr-etched.step/ads1271ibpwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1271ibpwr.step/ads1271ibpwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
e557bad6e4152574, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).