Symbol: REFCOM (pin 24) typed Output, ERC fails when tied to ground
Symbol pin type: REFCOM (pin 24) is typed Output, so ERC fails on any board with two of these ADCs
Page: adom/ads124s08irhbr, KiCad symbol in the KiCad PCM package (symbols/*.kicad_sym, unpacked from the Cloud Library).
What happens
- Pin 24 REFCOM is drawn with electrical type
output. - REFCOM is the negative reference input and common of the internal reference (TI ADS124S08 data sheet, Pin Functions table: "REFCOM: Analog: Reference common, connect to AVSS"). It is not driven by the chip.
- With REFCOM tied to AVSS/GND as the data sheet says, KiCad ERC reports "Pins of type Output and Power output are connected" against the GND power flag, and "Output and Output are connected" when two or more ADS124S08 share the ground.
Repro
- Place two ADS124S08IRHBR symbols from the package, tie each REFCOM to GND, add a PWR_FLAG on GND.
kicad-cli sch erc-> 3 errors on Pin 24 [REFCOM, Output].
Expected
- REFCOM typed
passive(orinput); then ERC is clean.
Workaround used
- Retype pin 24 to
passivein the project copy of the symbol.
Environment: KiCad 10.0.4, adom-aiflow 0.2.93 (project-page / pcm-stage), 2026-11-20.
0 Replies
Log in to reply.