← Commit history

Initial commit: component/ads124s06irhbr

Ray ·b3d95c904b ·
2 files changed +379
README.mdadded+70
@@ -0,0 +1,70 @@+# ADS124S06IRHBR++**Texas Instruments** · Analog To Digital Converters (ADC) · VQFN-32-EP(5x5)++ADS124S06IRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AINCOM | input | Analog input common for single-ended measurements |+| 2 | AIN5 | input | Analog input 5 |+| 3 | AIN4 | input | Analog input 4 |+| 4 | AIN3 | input | Analog input 3 |+| 5 | AIN2 | input | Analog input 2 |+| 6 | AIN1 | input | Analog input 1 |+| 7 | AIN0 | input | Analog input 0 |+| 8 | START/SYNC | input | Starts conversion or synchronizes conversions; rising edge initiates new conversion |+| 9 | CS | input | Chip select active low; must remain low during entire data transaction |+| 10 | DIN | input | Serial data input; data latched on SCLK falling edge |+| 11 | SCLK | input | Serial clock input; input data latched on falling edge and output data updated on rising edge |+| 12 | DOUT/DRDY | tri_state | Serial data output combined with data ready indication; goes to high-impedance state when CS is high |+| 13 | DRDY | output | Data ready output; transitions low when conversion data are ready |+| 14 | DGND | power_in | Digital ground |+| 15 | IOVDD | power_in | Digital I/O power supply; connect 100-nF or larger capacitor to DGND if not tied to DVDD |+| 16 | DVDD | power_in | Digital core power supply; connect 100-nF or larger capacitor to DGND |+| 17 | CLK | input | External clock input; connect to DGND to use internal 4.096-MHz oscillator |+| 18 | RESET | input | Reset input active low |+| 19 | GPIO3/AIN11 | bidirectional | General-purpose I/O or analog input 11 (ADS124S08 only); logic levels based on analog supply |+| 20 | GPIO2/AIN10 | bidirectional | General-purpose I/O or analog input 10 (ADS124S08 only); logic levels based on analog supply |+| 21 | GPIO1/AIN9 | bidirectional | General-purpose I/O or analog input 9 (ADS124S08 only); logic levels based on analog supply |+| 22 | GPIO0/AIN8 | bidirectional | General-purpose I/O or analog input 8 (ADS124S08 only); logic levels based on analog supply |+| 23 | REFOUT | output | Positive voltage reference output; connect 1-µF to 47-µF capacitor to REFCOM if internal voltage reference enabled |+| 24 | REFCOM | power_in | Negative voltage reference output; connect to AVSS |+| 25 | NC | unconnected | Leave unconnected or connect to AVSS |+| 26 | AVDD | power_in | Positive analog power supply; connect 330-nF or larger capacitor to AVSS |+| 27 | AVSS | power_in | Negative analog power supply |+| 28 | AVSS-SW | power_in | Negative analog power supply low-side switch; connect to AVSS |+| 29 | REFN0 | input | Negative external reference input 0 |+| 30 | REFP0 | input | Positive external reference input 0 |+| 31 | REFN1/AIN7 | input | Negative external reference input 1 or analog input 7 (ADS124S08 only) |+| 32 | REFP1/AIN6 | input | Positive external reference input 1 or analog input 6 (ADS124S08 only) |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Data Acquisition |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `ADS124S06IRHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `ads124s06irhbr-etched.step` / `ads124s06irhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads124s06irhbr.step` / `ads124s06irhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads124s06) (115 pp, sha256 `62eb7595c22ca2ef`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads124s06irhbr-datasheet.pdf)
page.jsonadded+309
@@ -0,0 +1,309 @@+{+  "slug": "ads124s06irhbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads124s06irhbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads124s06irhbr.kicad_sym",+    "ads124s06irhbr.kicad_mod",+    "ads124s06irhbr.glb",+    "ads124s06irhbr.step",+    "ads124s06irhbr.lbr",+    "docs/hero.png",+    "docs/ads124s06irhbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS124S06IRHBR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads124s06",+    "parts": {+      "symbol": "ads124s06irhbr.kicad_sym",+      "footprint": "ads124s06irhbr.kicad_mod",+      "model_3d": "ads124s06irhbr-etched.glb",+      "model_3d_plain": "ads124s06irhbr.glb",+      "model_3d_step": "ads124s06irhbr-etched.step",+      "model_3d_step_plain": "ads124s06irhbr.step",+      "lbr": "ads124s06irhbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2669973",+      "digikey": "296-ADS124S06IRHBRTR-ND",+      "mouser": "595-ADS124S06IRHBR"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T22:46:05Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-ADS124S06IRHBRTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-ADS124S06IRHBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "AINCOM",+        "type": "input",+        "description": "Analog input common for single-ended measurements"+      },+      {+        "number": "2",+        "name": "AIN5",+        "type": "input",+        "description": "Analog input 5"+      },+      {+        "number": "3",+        "name": "AIN4",+        "type": "input",+        "description": "Analog input 4"+      },+      {+        "number": "4",+        "name": "AIN3",+        "type": "input",+        "description": "Analog input 3"+      },+      {+        "number": "5",+        "name": "AIN2",+        "type": "input",+        "description": "Analog input 2"+      },+      {+        "number": "6",+        "name": "AIN1",+        "type": "input",+        "description": "Analog input 1"+      },+      {+        "number": "7",+        "name": "AIN0",+        "type": "input",+        "description": "Analog input 0"+      },+      {+        "number": "8",+        "name": "START/SYNC",+        "type": "input",+        "description": "Starts conversion or synchronizes conversions; rising edge initiates new conversion"+      },+      {+        "number": "9",+        "name": "CS",+        "type": "input",+        "description": "Chip select active low; must remain low during entire data transaction"+      },+      {+        "number": "10",+        "name": "DIN",+        "type": "input",+        "description": "Serial data input; data latched on SCLK falling edge"+      },+      {+        "number": "11",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input; input data latched on falling edge and output data updated on rising edge"+      },+      {+        "number": "12",+        "name": "DOUT/DRDY",+        "type": "tri_state",+        "description": "Serial data output combined with data ready indication; goes to high-impedance state when CS is high"+      },+      {+        "number": "13",+        "name": "DRDY",+        "type": "output",+        "description": "Data ready output; transitions low when conversion data are ready"+      },+      {+        "number": "14",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground"+      },+      {+        "number": "15",+        "name": "IOVDD",+        "type": "power_in",+        "description": "Digital I/O power supply; connect 100-nF or larger capacitor to DGND if not tied to DVDD"+      },+      {+        "number": "16",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital core power supply; connect 100-nF or larger capacitor to DGND"+      },+      {+        "number": "17",+        "name": "CLK",+        "type": "input",+        "description": "External clock input; connect to DGND to use internal 4.096-MHz oscillator"+      },+      {+        "number": "18",+        "name": "RESET",+        "type": "input",+        "description": "Reset input active low"+      },+      {+        "number": "19",+        "name": "GPIO3/AIN11",+        "type": "bidirectional",+        "description": "General-purpose I/O or analog input 11 (ADS124S08 only); logic levels based on analog supply"+      },+      {+        "number": "20",+        "name": "GPIO2/AIN10",+        "type": "bidirectional",+        "description": "General-purpose I/O or analog input 10 (ADS124S08 only); logic levels based on analog supply"+      },+      {+        "number": "21",+        "name": "GPIO1/AIN9",+        "type": "bidirectional",+        "description": "General-purpose I/O or analog input 9 (ADS124S08 only); logic levels based on analog supply"+      },+      {+        "number": "22",+        "name": "GPIO0/AIN8",+        "type": "bidirectional",+        "description": "General-purpose I/O or analog input 8 (ADS124S08 only); logic levels based on analog supply"+      },+      {+        "number": "23",+        "name": "REFOUT",+        "type": "output",+        "description": "Positive voltage reference output; connect 1-µF to 47-µF capacitor to REFCOM if internal voltage reference enabled"+      },+      {+        "number": "24",+        "name": "REFCOM",+        "type": "power_in",+        "description": "Negative voltage reference output; connect to AVSS"+      },+      {+        "number": "25",+        "name": "NC",+        "type": "unconnected",+        "description": "Leave unconnected or connect to AVSS"+      },+      {+        "number": "26",+        "name": "AVDD",+        "type": "power_in",+        "description": "Positive analog power supply; connect 330-nF or larger capacitor to AVSS"+      },+      {+        "number": "27",+        "name": "AVSS",+        "type": "power_in",+        "description": "Negative analog power supply"+      },+      {+        "number": "28",+        "name": "AVSS-SW",+        "type": "power_in",+        "description": "Negative analog power supply low-side switch; connect to AVSS"+      },+      {+        "number": "29",+        "name": "REFN0",+        "type": "input",+        "description": "Negative external reference input 0"+      },+      {+        "number": "30",+        "name": "REFP0",+        "type": "input",+        "description": "Positive external reference input 0"+      },+      {+        "number": "31",+        "name": "REFN1/AIN7",+        "type": "input",+        "description": "Negative external reference input 1 or analog input 7 (ADS124S08 only)"+      },+      {+        "number": "32",+        "name": "REFP1/AIN6",+        "type": "input",+        "description": "Positive external reference input 1 or analog input 6 (ADS124S08 only)"+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad (exposed pad): Datasheet does not assign a traditional pin number; designated as 'EP' pe; ADS124S06 variant limitation: Analog input functions AIN6–AIN11 on pins 19–22, 31, and 32 are not av",+          "exposed pad 33 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 21,+        "cost_usd": 0.3731,+        "at": "2026-09-24T22:45:42"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads124s06",+        "pages": 115,+        "sha256": "62eb7595c22ca2ef",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file