main
Ray Publish 0.1.2 2ca77cd
{
  "schema_version": 1,
  "type": "component",
  "slug": "ads1247ipwr",
  "title": "ADS1247IPWR",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.2",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ads1247ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADS1247IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads1248",
    "parts": {
      "symbol": "ads1247ipwr.kicad_sym",
      "footprint": "ads1247ipwr.kicad_mod",
      "model_3d": "ads1247ipwr-hero.glb",
      "model_3d_plain": "ads1247ipwr.glb",
      "model_3d_step": "ads1247ipwr-etched.step",
      "model_3d_step_plain": "ads1247ipwr.step",
      "lbr": "ads1247ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C26439"
    },
    "pins": [
      {
        "number": "1",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to DGND"
      },
      {
        "number": "2",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference"
      },
      {
        "number": "3",
        "name": "CLK",
        "type": "input",
        "description": "External clock input 1 to 4.5 MHz, or tie to DGND to activate the internal oscillator"
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "input",
        "description": "Reset input active low, pulse low for minimum 4 tCLK cycles to reset the device"
      },
      {
        "number": "5",
        "name": "REFP0/GPIO0",
        "type": "bidirectional",
        "description": "Positive external reference input 0 or general-purpose digital input/output pin 0, reference voltage range 0.5 V to (AVDD - AVSS - 1 V)"
      },
      {
        "number": "6",
        "name": "REFN0/GPIO1",
        "type": "bidirectional",
        "description": "Negative external reference input 0 or general-purpose digital input/output pin 1, reference voltage range (AVSS - 0.1 V) to (V(REFP) - 0.5 V)"
      },
      {
        "number": "7",
        "name": "VREFOUT",
        "type": "power_out",
        "description": "Positive internal reference voltage output ±2.048 V nominal, source/sink ±10 mA, connect 1 to 47 μF capacitor to VREFCOM"
      },
      {
        "number": "8",
        "name": "VREFCOM",
        "type": "power_out",
        "description": "Negative internal reference voltage output, connect to AVSS when using unipolar supply or to mid-voltage of power supply when using bipolar supply"
      },
      {
        "number": "9",
        "name": "AIN0/IEXC",
        "type": "input",
        "description": "Analog input 0 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"
      },
      {
        "number": "10",
        "name": "AIN1/IEXC",
        "type": "input",
        "description": "Analog input 1 or optional excitation current source output, analog input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"
      },
      {
        "number": "11",
        "name": "AIN2/IEXC/GPIO2",
        "type": "bidirectional",
        "description": "Analog input 2, optional excitation current source output, or general-purpose digital input/output pin 2, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"
      },
      {
        "number": "12",
        "name": "AIN3/IEXC/GPIO3",
        "type": "bidirectional",
        "description": "Analog input 3, optional excitation current source output, or general-purpose digital input/output pin 3, input voltage range (AVSS - 0.1 V) to (AVDD + 0.1 V)"
      },
      {
        "number": "13",
        "name": "AVSS",
        "type": "power_in",
        "description": "Negative analog power supply, -2.65 V to +0.1 V relative to DGND"
      },
      {
        "number": "14",
        "name": "AVDD",
        "type": "power_in",
        "description": "Positive analog power supply +2.7 V to +5.25 V, connect 0.1 μF bypass capacitor to AVSS"
      },
      {
        "number": "15",
        "name": "START",
        "type": "input",
        "description": "Conversion start input active high, pulse high for minimum 3 tCLK cycles to initiate a conversion"
      },
      {
        "number": "16",
        "name": "CS",
        "type": "input",
        "description": "Chip select input active low for SPI communication, brings DOUT/DRDY to high-impedance state when high"
      },
      {
        "number": "17",
        "name": "DRDY",
        "type": "output",
        "description": "Data ready output active low, indicates a new conversion result is available in the conversion result buffer"
      },
      {
        "number": "18",
        "name": "DOUT/DRDY",
        "type": "tri_state",
        "description": "Serial data output or data output combined with data ready, MSB first, enters high-impedance state when CS is taken high"
      },
      {
        "number": "19",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input MSB first, data shifted in on the falling edge of SCLK"
      },
      {
        "number": "20",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input for SPI communication up to 4.5 MHz, SCLK idles low, data shifted out on rising edge"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 104,
        "cost_usd": 1.0578,
        "at": "2026-09-23T10:52:24"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads1248",
        "pages": 104,
        "sha256": "08b29c91036dd059",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads1247ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads1247ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "39f2480fad991d626ff8cde6e2b2e085581744297d080fa2f6595235bf0338a7",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Data Acquisition",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ads1247ipwr"
  ],
  "discovery_pitch": "ADS1247IPWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads1247ipwr.kicad_sym",
    "ads1247ipwr.kicad_mod",
    "ads1247ipwr.glb",
    "ads1247ipwr.step",
    "ads1247ipwr.lbr",
    "docs/hero.png",
    "docs/ads1247ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads1247ipwr-etched.step",
    "ads1247ipwr-hero.glb",
    "ads1247ipwr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-24T15:58:02.515Z",
  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}