ADS1230IPWR

{
  "schema_version": 1,
  "type": "component",
  "slug": "ads1230ipwr",
  "title": "ADS1230IPWR",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ads1230ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADS1230IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "http://www.ti.com/cn/lit/gpn/ads1230",
    "parts": {
      "symbol": "ads1230ipwr.kicad_sym",
      "footprint": "ads1230ipwr.kicad_mod",
      "model_3d": "ads1230ipwr-etched.glb",
      "model_3d_plain": "ads1230ipwr.glb",
      "model_3d_step": "ads1230ipwr-etched.step",
      "model_3d_step_plain": "ads1230ipwr.step",
      "lbr": "ads1230ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C58052"
    },
    "pins": [
      {
        "number": "1",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply, 2.7V to 5.3V"
      },
      {
        "number": "2",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference"
      },
      {
        "number": "3",
        "name": "CLKIN",
        "type": "input",
        "description": "External clock input, typically 4.9152MHz with allowable frequency range 0.2 to 6 MHz; tie low to activate internal oscillator"
      },
      {
        "number": "4",
        "name": "GAIN",
        "type": "input",
        "description": "PGA gain select input: 0 selects gain of 64, 1 selects gain of 128"
      },
      {
        "number": "5",
        "name": "CAP",
        "type": "passive",
        "description": "Gain amplifier bypass capacitor connection with internal 2kΩ resistor; use 0.1µF external capacitor for 720Hz low-pass filter corner frequency"
      },
      {
        "number": "6",
        "name": "CAP",
        "type": "passive",
        "description": "Gain amplifier bypass capacitor connection with internal 2kΩ resistor; use 0.1µF external capacitor for 720Hz low-pass filter corner frequency"
      },
      {
        "number": "7",
        "name": "AINP",
        "type": "input",
        "description": "Positive analog input for differential measurement; full-scale input range ±39mV at gain 64 or ±19.5mV at gain 128; protected with internal ESD diodes"
      },
      {
        "number": "8",
        "name": "AINN",
        "type": "input",
        "description": "Negative analog input for differential measurement; full-scale input range ±39mV at gain 64 or ±19.5mV at gain 128; protected with internal ESD diodes"
      },
      {
        "number": "9",
        "name": "REFN",
        "type": "input",
        "description": "Negative reference input; REFN must be within AGND - 0.1V to REFP - 1.5V, protected with internal ESD diodes"
      },
      {
        "number": "10",
        "name": "REFP",
        "type": "input",
        "description": "Positive reference input; REFP must be within REFN + 1.5V to AVDD + 0.1V, protected with internal ESD diodes"
      },
      {
        "number": "11",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference"
      },
      {
        "number": "12",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply, 2.7V to 5.3V"
      },
      {
        "number": "13",
        "name": "SPEED",
        "type": "input",
        "description": "Data rate select input: 0 selects 10SPS data rate with simultaneous 50Hz and 60Hz rejection, 1 selects 80SPS data rate"
      },
      {
        "number": "14",
        "name": "PDWN",
        "type": "input",
        "description": "Power-down input; holding this pin low powers down entire converter and resets ADC circuitry; must remain low for minimum 26µs pulse width"
      },
      {
        "number": "15",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input; data clocked out on rising edge at maximum frequency 5MHz; also initiates offset calibration and standby modes; includes built-in hysteresis"
      },
      {
        "number": "16",
        "name": "DRDY/DOUT",
        "type": "output",
        "description": "Dual-purpose output: indicates valid data by going low, then outputs 20-bit conversion data MSB first on subsequent SCLK rising edges"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 31,
        "cost_usd": 0.2027,
        "at": "2026-09-21T15:20:11"
      },
      "datasheet": {
        "url": "http://www.ti.com/cn/lit/gpn/ads1230",
        "pages": 31,
        "sha256": "0f57e6ad7aafe806",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads1230ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads1230ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b27b841cad83e29fc09bc8d81168b3862b77732ea4a878e47005fc1e1e65fde4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "Data Acquisition",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ads1230ipwr"
  ],
  "discovery_pitch": "ADS1230IPWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads1230ipwr.kicad_sym",
    "ads1230ipwr.kicad_mod",
    "ads1230ipwr.glb",
    "ads1230ipwr.step",
    "ads1230ipwr.lbr",
    "docs/hero.png",
    "docs/ads1230ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T15:57:21.604Z"
}