component
ADS1113IDGST
Public Made by Adomby adom
Texas Instruments Global Sourcing Parts, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+47@@ -0,0 +1,47 @@+# ADS1113IDGST++**Texas Instruments** · Global Sourcing Parts · VSSOP-10-0.5mm++ADS1113IDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ADDR | input | I2C target address select: tie to GND, VDD, SDA, or SCL to select one of four target addresses (1001000b, 1001001b, 1001010b, 1001011b), and the pin state is sampled continuously. |+| 2 | NC | unconnected | No connect on the ADS1113 (ALERT/RDY is not provided on this device); leave floating or connect to GND. |+| 3 | GND | power_in | Analog ground, the reference for the supply and for the analog input voltage limits. |+| 4 | AIN0 | input | Analog input 0; absolute input voltage must stay between GND and VDD, and the input cannot accept negative voltages with respect to GND. |+| 5 | AIN1 | input | Analog input 1; absolute input voltage must stay between GND and VDD, and it is connected to GND externally for single-ended measurements on the ADS1113. |+| 6 | NC | unconnected | No connect; leave floating or connect to GND. |+| 7 | NC | unconnected | No connect; leave floating or connect to GND. |+| 8 | VDD | power_in | Power supply, 2 V to 5.5 V relative to GND; connect a 0.1 µF decoupling capacitor to GND. |+| 9 | SDA | bidirectional | I2C serial data input and output; open-drain, requires a pullup resistor to VDD, and the digital input limit is GND - 0.3 V to 5.5 V. |+| 10 | SCL | input | I2C serial clock input; open-drain bus line requiring a pullup resistor to VDD, and the device never stretches the clock. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-10-0.5mm |+| Category | Global Sourcing Parts |+| Pins | 10 |++## CAD (KiCad official)++- Symbol: `ADS1113IDGST`+- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`+- 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)+- 3D model files: `ads1113idgst-etched.step` / `ads1113idgst-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads1113idgst.step` / `ads1113idgst.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads1114) (57 pp, sha256 `8b5524864b018672`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads1113idgst-datasheet.pdf)
page.jsonadded+211@@ -0,0 +1,211 @@+{+ "slug": "ads1113idgst",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Global Sourcing Parts, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "global sourcing parts",+ "ads1113idgst",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads1113idgst.kicad_sym",+ "ads1113idgst.kicad_mod",+ "ads1113idgst.glb",+ "ads1113idgst.step",+ "ads1113idgst.lbr",+ "docs/hero.png",+ "docs/ads1113idgst-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads1113idgst-hero.glb",+ "ads1113idgst-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS1113IDGST",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-10-0.5mm",+ "pin_count": 10,+ "category": "Global Sourcing Parts",+ "subcategory": "Global Sourcing Parts",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads1114",+ "parts": {+ "symbol": "ads1113idgst.kicad_sym",+ "footprint": "ads1113idgst.kicad_mod",+ "model_3d": "ads1113idgst-hero.glb",+ "model_3d_plain": "ads1113idgst.glb",+ "model_3d_step": "ads1113idgst-etched.step",+ "model_3d_step_plain": "ads1113idgst.step",+ "lbr": "ads1113idgst.lbr"+ },+ "distributor_links": {+ "lcsc": "C2651336",+ "digikey": "296-24930-2-ND",+ "mouser": "595-ADS1113IDGST"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T03:00:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-24930-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-ADS1113IDGST",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "ADDR",+ "type": "input",+ "description": "I2C target address select: tie to GND, VDD, SDA, or SCL to select one of four target addresses (1001000b, 1001001b, 1001010b, 1001011b), and the pin state is sampled continuously."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect on the ADS1113 (ALERT/RDY is not provided on this device); leave floating or connect to GND."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground, the reference for the supply and for the analog input voltage limits."+ },+ {+ "number": "4",+ "name": "AIN0",+ "type": "input",+ "description": "Analog input 0; absolute input voltage must stay between GND and VDD, and the input cannot accept negative voltages with respect to GND."+ },+ {+ "number": "5",+ "name": "AIN1",+ "type": "input",+ "description": "Analog input 1; absolute input voltage must stay between GND and VDD, and it is connected to GND externally for single-ended measurements on the ADS1113."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; leave floating or connect to GND."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; leave floating or connect to GND."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply, 2 V to 5.5 V relative to GND; connect a 0.1 µF decoupling capacitor to GND."+ },+ {+ "number": "9",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data input and output; open-drain, requires a pullup resistor to VDD, and the digital input limit is GND - 0.3 V to 5.5 V."+ },+ {+ "number": "10",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input; open-drain bus line requiring a pullup resistor to VDD, and the device never stretches the clock."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's pin table covers the RUG, DYN, and DGS packages together. Pin numbers and positions ; For the ADS1113 specifically, Table 4-1 lists ALERT/RDY as absent (—) and assigns pin 2 as NC, with ; The schema has no field for specifications, so the headline electrical parameters (VDD 2 V to 5.5 V,"+ ],+ "pages_sent": 22,+ "cost_usd": 0.1334,+ "at": "2026-10-08T02:59:49"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads1114",+ "pages": 57,+ "sha256": "8b5524864b018672",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads1113idgst.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads1113idgst-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2de27d352b6ce0b54adaccaccebc91ae02b511b3b4627cf450dc7b5d3edf88f2",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}