main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ads1110a2idbvr: viewers rendered from the public page · Ray
ads1110a2idbvr-etched.glb ads1110a2idbvr: factory component page (tier=mfr) · Ray
ads1110a2idbvr-etched.step ads1110a2idbvr: factory component page (tier=mfr) · Ray
ads1110a2idbvr-hero.glb ads1110a2idbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
ads1110a2idbvr-hero.overlay.json ads1110a2idbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
ads1110a2idbvr.glb Publish 0.1.0 · Ray
ads1110a2idbvr.kicad_mod Publish 0.1.0 · Ray
ads1110a2idbvr.kicad_sym Publish 0.1.0 · Ray
ads1110a2idbvr.lbr Publish 0.1.0 · Ray
ads1110a2idbvr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

ADS1110A2IDBVR

Texas Instruments · Analog To Digital Converters (ADCs) · SOT-23-6

ADS1110A2IDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN+ power_in Positive differential analog input to the PGA; input range is GND − 0.2V to VDD + 0.2V, with full-scale differential input of ±2.048V/PGA.
2 GND power_in Ground reference for the supply and for the analog and I2C input voltages.
3 SCL input I2C serial clock input only (the device never drives it), open-drain bus needing a pull-up, tolerates −0.5V to 6V.
4 SDA bidirectional I2C serial data line, open-drain and requiring a pull-up resistor, tolerates −0.5V to 6V.
5 VDD power_in Power supply input, 2.7V to 5.5V (absolute max 6V), decoupled with a 0.1µF bypass capacitor.
6 VIN- power_in Negative differential analog input to the PGA; input range is GND − 0.2V to VDD + 0.2V, and it is usually grounded for single-ended measurements.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category ADC/DAC/Data Conversion
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD to GND VDD -0.3 6 V 2
Input Current momentary 100 mA Momentary 2
Input Current continuous 10 mA Continuous 2
Voltage to GND VIN+, VIN- -0.3 0.3 V -0.3V to VDD + 0.3V (max given as VDD + 0.3V) 2
Voltage to GND SDA, SCL -0.5 6 V 2
Maximum Junction Temperature 150 °C 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -60 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
Analog Input Voltage -0.2 0.2 V VIN+ to GND or VIN- to GND; GND - 0.2 to VDD + 0.2 (max given as VDD + 0.2) 3
Differential Input Impedance 2.8 MΩ 2.8/PGA 3
Common-Mode Input Impedance PGA=1 3.5 MΩ PGA = 1 3
Common-Mode Input Impedance PGA=4 1.8 MΩ PGA = 4 3
Common-Mode Input Impedance PGA=8 0.9 MΩ PGA = 8 3
Data Rate DR=00 180 240 308 SPS DR = 00 3
Data Rate DR=01 45 60 77 SPS DR = 01 3
Data Rate DR=10 22 30 39 SPS DR = 10 3
Data Rate DR=11 11 15 20 SPS DR = 11 3
Integral Nonlinearity INL 0.004 0.01 % of FSR DR = 11, PGA = 1, End Point Fit 3
Offset Error PGA=1 1.2 8 mV PGA = 1 3
Offset Error PGA=2 0.7 4 mV PGA = 2 3
Offset Error PGA=4 0.5 2.5 mV PGA = 4 3
Offset Error PGA=8 0.4 1.5 mV PGA = 8 3
Gain Error 0.05 0.4 % Includes all errors from onboard PGA and reference 3
PGA Gain Error Match 0.02 0.1 % Match Between Any Two PGA Gains 3
Gain Error Drift 5 40 ppm/°C Includes all errors from onboard PGA and reference 3
Common-Mode Rejection PGA=8 95 105 dB At DC and PGA = 8 3
Input High Voltage VIH 0.7 6 V min 0.7 • VDD 3
Input Low Voltage VIL -0.5 0.3 V GND - 0.5 to 0.3 • VDD 3
Output Low Voltage VOL 0 0.4 V IOL = 3mA; min GND 3
Input Leakage High IH 10 µA VIH = 5.5V 3
Input Leakage Low IL -10 µA VIL = GND 3
Power-Supply Voltage VDD 2.7 5.5 V 3
Supply Current Power Down 0.05 2 µA Power Down 3
Supply Current Active Mode 240 350 µA Active Mode 3
Power Dissipation 5V 1.2 1.75 mW VDD = 5.0V 3
Power Dissipation 3V 0.675 mW VDD = 3.0V 3
Offset Drift PGA=1 1.2 µV/°C PGA = 1 3
Gain vs VDD 80 ppm/V 3
SCLK operating frequency, Fast mode t(SCLK) 0.4 MHz Fast mode 9
SCLK operating frequency, High-speed mode t(SCLK) 3.4 MHz High-speed mode 9
Bus free time START/STOP, Fast t(BUF) 600 ns Fast mode 9
Bus free time START/STOP, High-speed t(BUF) 160 ns High-speed mode 9
Data setup time, Fast t(SUDAT) 100 ns Fast mode 9
Data setup time, High-speed t(SUDAT) 10 ns High-speed mode 9
SCLK clock LOW period, Fast t(LOW) 1300 ns Fast mode 9
SCLK clock HIGH period, Fast t(HIGH) 600 ns Fast mode 9
Clock/data fall time, Fast tF 300 ns Fast mode 9
Clock/data rise time, Fast tR 300 ns Fast mode 9

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADS1110A2IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ads1110a2idbvr-etched.step / ads1110a2idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads1110a2idbvr.step / ads1110a2idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 6c9752c146f98953, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF