main
Ray
Publish 0.1.0
eae15cc
ADR5044WBRTZ-R7
Analog Devices · Voltage References · SOT-23-3
ADR5044WBRTZ-R7 from Analog Devices, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive terminal of the shunt reference, connected to the supply through an external bias resistor; operating current range is 50 µA to 15 mA. |
| 2 | V- | power_in | Negative terminal of the shunt reference (circuit ground in normal use). |
| 3 | T | passive | Pin 3 is recommended to be connected to V+. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Grade B | VOUT | 4.092 | 4.096 | 4.1 | V | IIN = 100 µA, TA = 25°C | 4 |
| Initial Accuracy Grade B | VOERR | -4.096 | 4.096 | mV | IIN = 100 µA | 5 | |
| Initial Accuracy Grade B | VOERR | -0.1 | 0.1 | % | IIN = 100 µA | 5 | |
| Temperature Coefficient Grade B | TCVOUT | 10 | 75 | ppm/°C | −40°C < TA < +125°C; guaranteed by design | 5 | |
| Output Voltage Change vs. IIN | ΔVR | 0.7 | 3 | mV | IIN = 50 µA to 1 mA, −40°C < TA < +125°C | 5 | |
| Output Voltage Change vs. IIN | ΔVR | 4 | 8 | mV | IIN = 1 mA to 15 mA, −40°C < TA < +125°C | 5 | |
| Dynamic Output Impedance | ΔVR/ΔIR | 0.2 | Ω | IIN = 50 µA to 15 mA | 5 | ||
| Minimum Operating Current | IIN | 50 | µA | TA = 25°C | 5 | ||
| Minimum Operating Current | IIN | 60 | µA | −40°C < TA < +125°C | 5 | ||
| Voltage Noise | eN | 5.4 | µV rms | IIN = 100 µA; 0.1 Hz to 10 Hz | 5 | ||
| Voltage Noise | eN | 240 | µV rms | IIN = 100 µA; 10 Hz to 10 kHz | 5 | ||
| Turn-On Settling Time | tR | 56 | µs | CLOAD = 0 µF | 5 | ||
| Output Voltage Hysteresis | ΔVOUT_HYS | 40 | ppm | IIN = 1 mA | 5 | ||
| Reverse Current | 25 | mA | Ratings apply at 25°C | 6 | |||
| Forward Current | 20 | mA | Ratings apply at 25°C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Junction Temperature Range | -65 | 150 | °C | 6 | |||
| Lead Temperature (Soldering, 60 sec) | 300 | °C | Soldering, 60 sec | 6 | |||
| Extended Temperature Range | -40 | 125 | °C | 6 | |||
| Thermal Resistance Junction-to-Ambient RT-3 | θJA | 270 | °C/W | RT-3 (SOT-23-3) | 6 | ||
| Thermal Resistance Junction-to-Case RT-3 | θJC | 102 | °C/W | RT-3 (SOT-23-3) | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADR5044WBRTZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0050000000000001 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adr5044wbrtz-r7-etched.step/adr5044wbrtz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr5044wbrtz-r7.step/adr5044wbrtz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
9270161a9890b670, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# ADR5044WBRTZ-R7
**Analog Devices** · Voltage References · SOT-23-3
ADR5044WBRTZ-R7 from Analog Devices, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive terminal of the shunt reference, connected to the supply through an external bias resistor; operating current range is 50 µA to 15 mA. |
| 2 | V- | power_in | Negative terminal of the shunt reference (circuit ground in normal use). |
| 3 | T | passive | Pin 3 is recommended to be connected to V+. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Grade B | VOUT | 4.092 | 4.096 | 4.1 | V | IIN = 100 µA, TA = 25°C | 4 |
| Initial Accuracy Grade B | VOERR | -4.096 | | 4.096 | mV | IIN = 100 µA | 5 |
| Initial Accuracy Grade B | VOERR | -0.1 | | 0.1 | % | IIN = 100 µA | 5 |
| Temperature Coefficient Grade B | TCVOUT | | 10 | 75 | ppm/°C | −40°C < TA < +125°C; guaranteed by design | 5 |
| Output Voltage Change vs. IIN | ΔVR | | 0.7 | 3 | mV | IIN = 50 µA to 1 mA, −40°C < TA < +125°C | 5 |
| Output Voltage Change vs. IIN | ΔVR | | 4 | 8 | mV | IIN = 1 mA to 15 mA, −40°C < TA < +125°C | 5 |
| Dynamic Output Impedance | ΔVR/ΔIR | | 0.2 | | Ω | IIN = 50 µA to 15 mA | 5 |
| Minimum Operating Current | IIN | | | 50 | µA | TA = 25°C | 5 |
| Minimum Operating Current | IIN | | | 60 | µA | −40°C < TA < +125°C | 5 |
| Voltage Noise | eN | | 5.4 | | µV rms | IIN = 100 µA; 0.1 Hz to 10 Hz | 5 |
| Voltage Noise | eN | | 240 | | µV rms | IIN = 100 µA; 10 Hz to 10 kHz | 5 |
| Turn-On Settling Time | tR | | 56 | | µs | CLOAD = 0 µF | 5 |
| Output Voltage Hysteresis | ΔVOUT_HYS | | 40 | | ppm | IIN = 1 mA | 5 |
| Reverse Current | | | | 25 | mA | Ratings apply at 25°C | 6 |
| Forward Current | | | | 20 | mA | Ratings apply at 25°C | 6 |
| Storage Temperature Range | | -65 | | 150 | °C | | 6 |
| Junction Temperature Range | | -65 | | 150 | °C | | 6 |
| Lead Temperature (Soldering, 60 sec) | | | | 300 | °C | Soldering, 60 sec | 6 |
| Extended Temperature Range | | -40 | | 125 | °C | | 6 |
| Thermal Resistance Junction-to-Ambient RT-3 | θJA | | 270 | | °C/W | RT-3 (SOT-23-3) | 6 |
| Thermal Resistance Junction-to-Case RT-3 | θJC | | 102 | | °C/W | RT-3 (SOT-23-3) | 6 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `ADR5044WBRTZ-R7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0050000000000001 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `adr5044wbrtz-r7-etched.step` / `adr5044wbrtz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adr5044wbrtz-r7.step` / `adr5044wbrtz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADR5040_5041_5043_5044_5045.pdf) (14 pp, sha256 `9270161a9890b670`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/adr5044wbrtz-r7-datasheet.pdf)