component
ADR425BRZ
Public Made by Adomby adom
Analog Devices Voltage References, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ADR425BRZ
Analog Devices · Voltage References · SOIC-8
ADR425BRZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TP | unconnected | Test pin reserved for factory testing; there are actual connections in TP pins, and users should not connect anything to it, otherwise the device may not function properly. |
| 2 | VIN | power_in | Input voltage; the ADR425 operating range is 7 V to 18 V, and the absolute maximum supply voltage is 18 V. |
| 3 | NIC | unconnected | No internal connection; the pin has no internal connections. |
| 4 | GND | power_in | Ground pin, defined as 0 V. |
| 5 | TRIM | passive | Trim terminal that adjusts the output voltage over a ±0.5% range without affecting the temperature coefficient; the datasheet recommends low temperature coefficient trim potentiometer and resistors, preferably <100 ppm/°C. |
| 6 | VOUT | power_out | Output voltage, 5.00 V nominal for the ADR425, with guaranteed load current up to 10 mA. |
| 7 | NIC | unconnected | No internal connection; the pin has no internal connections. |
| 8 | TP | unconnected | Test pin reserved for factory testing; there are actual connections in TP pins, and users should not connect anything to it, otherwise the device may not function properly. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, B grade | VOUT | 4.998 | 5 | 5.002 | V | 7 | |
| Initial accuracy, B grade (absolute) | VOUTERR | -2 | 2 | mV | 7 | ||
| Initial accuracy, B grade (relative) | VOUTERR | -0.04 | 0.04 | % | 7 | ||
| Temperature coefficient, B grade | TCVOUT | 1 | 3 | ppm/°C | 7 | ||
| Line regulation | ΔVO/ΔVIN | 10 | 35 | ppm/V | VIN = 7 V to 18 V, −40°C < TA < +125°C | 7 | |
| Load regulation | ΔVO/ΔIL | 70 | ppm/mA | IL = 0 mA to 10 mA, −40°C < TA < +125°C | 7 | ||
| Quiescent current | IIN | 390 | 500 | µA | No load | 7 | |
| Quiescent current over temperature | IIN | 600 | µA | −40°C < TA < +125°C | 7 | ||
| Supply voltage (absolute maximum) | 18 | V | 8 | ||||
| Storage temperature range | -65 | 150 | °C | 8 | |||
| Operating temperature range | -40 | 125 | °C | 8 | |||
| Junction temperature range | -65 | 150 | °C | 8 | |||
| Lead temperature (soldering) | 300 | °C | Soldering, 60 sec | 8 | |||
| Input voltage operating range (ADR425) | VIN | 7 | 18 | V | 1 | ||
| Thermal resistance, junction-to-ambient, 8-Lead SOIC (R) | θJA | 130 | °C/W | Devices soldered in circuit board (worst case) | 8 | ||
| Thermal resistance, junction-to-case, 8-Lead SOIC (R) | θJC | 43 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
ADR425BRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
adr425brz-etched.step/adr425brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr425brz.step/adr425brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
a3f954c509a578f6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADR425BRZ
**Analog Devices** · Voltage References · SOIC-8
ADR425BRZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TP | unconnected | Test pin reserved for factory testing; there are actual connections in TP pins, and users should not connect anything to it, otherwise the device may not function properly. |
| 2 | VIN | power_in | Input voltage; the ADR425 operating range is 7 V to 18 V, and the absolute maximum supply voltage is 18 V. |
| 3 | NIC | unconnected | No internal connection; the pin has no internal connections. |
| 4 | GND | power_in | Ground pin, defined as 0 V. |
| 5 | TRIM | passive | Trim terminal that adjusts the output voltage over a ±0.5% range without affecting the temperature coefficient; the datasheet recommends low temperature coefficient trim potentiometer and resistors, preferably <100 ppm/°C. |
| 6 | VOUT | power_out | Output voltage, 5.00 V nominal for the ADR425, with guaranteed load current up to 10 mA. |
| 7 | NIC | unconnected | No internal connection; the pin has no internal connections. |
| 8 | TP | unconnected | Test pin reserved for factory testing; there are actual connections in TP pins, and users should not connect anything to it, otherwise the device may not function properly. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Power Management ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, B grade | VOUT | 4.998 | 5 | 5.002 | V | | 7 |
| Initial accuracy, B grade (absolute) | VOUTERR | -2 | | 2 | mV | | 7 |
| Initial accuracy, B grade (relative) | VOUTERR | -0.04 | | 0.04 | % | | 7 |
| Temperature coefficient, B grade | TCVOUT | | 1 | 3 | ppm/°C | | 7 |
| Line regulation | ΔVO/ΔVIN | | 10 | 35 | ppm/V | VIN = 7 V to 18 V, −40°C < TA < +125°C | 7 |
| Load regulation | ΔVO/ΔIL | | | 70 | ppm/mA | IL = 0 mA to 10 mA, −40°C < TA < +125°C | 7 |
| Quiescent current | IIN | | 390 | 500 | µA | No load | 7 |
| Quiescent current over temperature | IIN | | | 600 | µA | −40°C < TA < +125°C | 7 |
| Supply voltage (absolute maximum) | | | | 18 | V | | 8 |
| Storage temperature range | | -65 | | 150 | °C | | 8 |
| Operating temperature range | | -40 | | 125 | °C | | 8 |
| Junction temperature range | | -65 | | 150 | °C | | 8 |
| Lead temperature (soldering) | | | | 300 | °C | Soldering, 60 sec | 8 |
| Input voltage operating range (ADR425) | VIN | 7 | | 18 | V | | 1 |
| Thermal resistance, junction-to-ambient, 8-Lead SOIC (R) | θJA | | 130 | | °C/W | Devices soldered in circuit board (worst case) | 8 |
| Thermal resistance, junction-to-case, 8-Lead SOIC (R) | θJC | | 43 | | °C/W | | 8 |
## CAD (KiCad official)
- Symbol: `ADR425BRZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `adr425brz-etched.step` / `adr425brz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adr425brz.step` / `adr425brz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADR420_421_423_425.pdf) (24 pp, sha256 `a3f954c509a578f6`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adr425brz-datasheet.pdf)