component
ADR392AUJZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage Reference, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ADR392AUJZ-REEL7
Analog Devices · Voltage Reference · TSOT-23-5
ADR392AUJZ-REEL7 from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Active-low shutdown input, TTL/CMOS compatible (logic low max 0.8 V, logic high min 2.4 V); a logic low or 0 V turns the device off and VOUT goes high impedance, and it must be tied to VIN (Pin 2) if shutdown is not used. |
| 2 | VIN | power_in | Input supply, 4.3 V to 15 V for the ADR392 (absolute maximum 18 V), with at least 300 mV headroom above the 4.096 V output. |
| 3 | VOUT (SENSE) | input | Output sense pin, connected to the load to regulate the output voltage (4.096 V for the ADR392). |
| 4 | VOUT (FORCE) | output | Reference output force pin, supplying up to 5 mA load current at 4.096 V and capable of driving 0 μF to 10 μF capacitive loads. |
| 5 | GND | power_in | Ground connection for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, A grade | VO | 4.09 | 4.096 | 4.102 | V | 4 | |
| Initial accuracy, A grade (mV) | VOERR | 6 | mV | 4 | |||
| Initial accuracy, A grade (%) | VOERR | 0.15 | % | 4 | |||
| Temperature coefficient, A grade | TCVO | 25 | ppm/°C | A grade, −40°C < TA < +125°C | 4 | ||
| Line regulation | ΔVO/ΔVIN | 10 | 25 | ppm/V | VIN = 4.3 V to 15 V, −40°C < TA < +125°C | 4 | |
| Load regulation | ΔVO/ΔILOAD | 140 | ppm/mA | ILOAD = 0 mA to 5 mA, −40°C < TA < +125°C, VIN = 5 V | 4 | ||
| Quiescent current (operating) | IIN | 140 | μA | −40°C < TA < +125°C | 4 | ||
| Shutdown supply current | ISHDN | 3 | μA | 4 | |||
| Shutdown logic low | VINL | 0.8 | V | 4 | |||
| Shutdown logic high | VINH | 2.4 | V | 4 | |||
| Supply voltage headroom | VIN − VO | 300 | mV | 4 | |||
| Quiescent current (no load) | IIN | 120 | μA | No load | 4 | ||
| Voltage noise | en p-p | 7 | μV p-p | 0.1 Hz to 10 Hz | 4 | ||
| Turn-on settling time | tR | 20 | μs | 4 | |||
| Long-term stability | ΔVO | 50 | ppm | 1000 hours | 4 | ||
| Output voltage hysteresis | ΔVO_HYS | 100 | ppm | 4 | |||
| Ripple rejection ratio | RRR | -80 | dB | fIN = 60 Hz | 4 | ||
| Short circuit to GND (VIN = 5 V) | ISC | 25 | mA | VIN = 5 V | 4 | ||
| Short circuit to GND (VIN = 15 V) | ISC | 30 | mA | VIN = 15 V | 4 | ||
| Shutdown logic input current | ILOGIC | 500 | nA | 4 | |||
| Supply voltage (absolute maximum) | 18 | V | 6 | ||||
| Storage temperature range | -65 | 125 | °C | 6 | |||
| Operating temperature range | -40 | 125 | °C | 6 | |||
| Junction temperature range | -65 | 125 | °C | 6 | |||
| Lead temperature (soldering) | 300 | °C | 60 sec | 6 | |||
| Thermal resistance, junction-to-ambient | θJA | 230 | °C/W | TSOT (UJ-5), device soldered in circuit board | 6 | ||
| Thermal resistance, junction-to-case | θJC | 146 | °C/W | TSOT (UJ-5) | 6 | ||
| Input voltage range | VIN | 4.3 | 15 | V | Range stated for ADR392 electrical characteristics, TA = 25°C unless otherwise noted | 4 |
CAD (KiCad official)
- Symbol:
ADR392AUJZ-REEL7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
adr392aujz-reel7-etched.step/adr392aujz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr392aujz-reel7.step/adr392aujz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
a9465d09e7d2d3dc, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADR392AUJZ-REEL7
**Analog Devices** · Voltage Reference · TSOT-23-5
ADR392AUJZ-REEL7 from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Active-low shutdown input, TTL/CMOS compatible (logic low max 0.8 V, logic high min 2.4 V); a logic low or 0 V turns the device off and VOUT goes high impedance, and it must be tied to VIN (Pin 2) if shutdown is not used. |
| 2 | VIN | power_in | Input supply, 4.3 V to 15 V for the ADR392 (absolute maximum 18 V), with at least 300 mV headroom above the 4.096 V output. |
| 3 | VOUT (SENSE) | input | Output sense pin, connected to the load to regulate the output voltage (4.096 V for the ADR392). |
| 4 | VOUT (FORCE) | output | Reference output force pin, supplying up to 5 mA load current at 4.096 V and capable of driving 0 μF to 10 μF capacitive loads. |
| 5 | GND | power_in | Ground connection for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage, A grade | VO | 4.09 | 4.096 | 4.102 | V | | 4 |
| Initial accuracy, A grade (mV) | VOERR | | | 6 | mV | | 4 |
| Initial accuracy, A grade (%) | VOERR | | | 0.15 | % | | 4 |
| Temperature coefficient, A grade | TCVO | | | 25 | ppm/°C | A grade, −40°C < TA < +125°C | 4 |
| Line regulation | ΔVO/ΔVIN | | 10 | 25 | ppm/V | VIN = 4.3 V to 15 V, −40°C < TA < +125°C | 4 |
| Load regulation | ΔVO/ΔILOAD | | | 140 | ppm/mA | ILOAD = 0 mA to 5 mA, −40°C < TA < +125°C, VIN = 5 V | 4 |
| Quiescent current (operating) | IIN | | | 140 | μA | −40°C < TA < +125°C | 4 |
| Shutdown supply current | ISHDN | | | 3 | μA | | 4 |
| Shutdown logic low | VINL | | | 0.8 | V | | 4 |
| Shutdown logic high | VINH | 2.4 | | | V | | 4 |
| Supply voltage headroom | VIN − VO | 300 | | | mV | | 4 |
| Quiescent current (no load) | IIN | | 120 | | μA | No load | 4 |
| Voltage noise | en p-p | | 7 | | μV p-p | 0.1 Hz to 10 Hz | 4 |
| Turn-on settling time | tR | | 20 | | μs | | 4 |
| Long-term stability | ΔVO | | 50 | | ppm | 1000 hours | 4 |
| Output voltage hysteresis | ΔVO_HYS | | 100 | | ppm | | 4 |
| Ripple rejection ratio | RRR | | -80 | | dB | fIN = 60 Hz | 4 |
| Short circuit to GND (VIN = 5 V) | ISC | | 25 | | mA | VIN = 5 V | 4 |
| Short circuit to GND (VIN = 15 V) | ISC | | 30 | | mA | VIN = 15 V | 4 |
| Shutdown logic input current | ILOGIC | | 500 | | nA | | 4 |
| Supply voltage (absolute maximum) | | | | 18 | V | | 6 |
| Storage temperature range | | -65 | | 125 | °C | | 6 |
| Operating temperature range | | -40 | | 125 | °C | | 6 |
| Junction temperature range | | -65 | | 125 | °C | | 6 |
| Lead temperature (soldering) | | | | 300 | °C | 60 sec | 6 |
| Thermal resistance, junction-to-ambient | θJA | | 230 | | °C/W | TSOT (UJ-5), device soldered in circuit board | 6 |
| Thermal resistance, junction-to-case | θJC | | 146 | | °C/W | TSOT (UJ-5) | 6 |
| Input voltage range | VIN | 4.3 | | 15 | V | Range stated for ADR392 electrical characteristics, TA = 25°C unless otherwise noted | 4 |
## CAD (KiCad official)
- Symbol: `ADR392AUJZ-REEL7`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `adr392aujz-reel7-etched.step` / `adr392aujz-reel7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adr392aujz-reel7.step` / `adr392aujz-reel7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589042085558804480) (20 pp, sha256 `a9465d09e7d2d3dc`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adr392aujz-reel7-datasheet.pdf)