component
ADR360BUJZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage References, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADR360BUJZ-REEL7
Analog Devices · Voltage References · TSOT-23-5
ADR360BUJZ-REEL7 from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | Not internally connected; this pin is not connected internally. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | VIN | power_in | Input voltage connection; the input range is 2.35 V (ADR360 only) to 15 V, with at least 300 mV dropout above VOUT. |
| 4 | VOUT | power_out | Output voltage; the device sources up to +5 mA and sinks up to −1 mA. |
| 5 | TRIM | passive | Output voltage trim terminal used to adjust VOUT over a nominal range; R1 gives fine adjustment and can be omitted. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 2.045 | 2.048 | 2.051 | V | 3 | |
| Initial accuracy | VOUTERR | -3 | 3 | mV | 3 | ||
| Initial accuracy | VOUTERR | -0.15 | 0.15 | % | 3 | ||
| Supply voltage | 18 | V | 9 | ||||
| Operating temperature range | -40 | 125 | °C | 9 | |||
| Storage temperature range | -65 | 125 | °C | 9 | |||
| Junction temperature range | -65 | 150 | °C | 9 | |||
| Lead temperature | 300 | °C | Soldering, 60 sec | 9 | |||
| Output short-circuit duration | 10 | sec | VIN > 15 V | 9 | |||
| Input voltage | VIN | 2.35 | 15 | V | 3 | ||
| Quiescent current | IIN | 150 | 190 | µA | −40°C < TA < +125°C | 3 | |
| Line regulation | ∆VOUT/∆VIN | 0.105 | mV/V | VIN = 2.45 V to 15 V, −40°C < TA < +125°C | 3 | ||
| Load regulation (sourcing) | ∆VOUT/∆ILOAD | 0.37 | mV/mA | Load resistance (ILOAD)= 0 mA to 5 mA, −40°C < TA < +125°C, VIN = 3 V | 3 | ||
| Load regulation (sinking) | ∆VOUT/∆ILOAD | 0.82 | mV/mA | ILOAD = −1 mA to 0 mA, −40°C < TA < +125°C, VIN = 3 V | 3 | ||
| Temperature coefficient | TCVOUT | 9 | ppm/°C | B grade, −40°C < TA < +125°C | 3 | ||
| Dropout voltage | VIN − VOUT | 300 | mV | 3 | |||
| Output current | IOUT | 5 | mA | Sourcing | 3 | ||
| Output current | IOUT | -1 | mA | Sinking | 3 | ||
| Voltage noise | eN p-p | 6.8 | µV p-p | Frequency = 0.1 Hz to 10 Hz | 3 | ||
| Turn on settling time | tR | 25 | µs | 3 | |||
| Long-term stability | ∆VOUT | 50 | ppm | 1000 hours | 3 | ||
| Output voltage hysteresis | ∆VOUT_HYS | 100 | ppm | 3 | |||
| Ripple rejection ratio | RRR | -70 | dB | fIN = 60 Hz | 3 | ||
| Short-circuit to GND current | ISC | 25 | mA | VIN = 5 V | 3 | ||
| Short-circuit to GND current | ISC | 30 | mA | VIN = 15 V | 3 | ||
| Thermal resistance, junction to ambient | θJA | 230 | °C/W | UJ-5 package, natural convection, one cubic foot sealed enclosure | 9 | ||
| Thermal resistance, junction to case | θJC | 146 | °C/W | UJ-5 package, junction to case | 9 |
CAD (KiCad official)
- Symbol:
ADR360BUJZ-REEL7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
adr360bujz-reel7-etched.step/adr360bujz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr360bujz-reel7.step/adr360bujz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
ad5e92b5dac7ef98, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).