component
ADR3512WCRMZ-R7
Public Made by Adomby adom
Analog Devices Voltage References, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ADR3512WCRMZ-R7
Analog Devices · Voltage References · MSOP-8
ADR3512WCRMZ-R7 from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENABLE | input | Enable connection that shuts the device down when at or below 0.7 V and makes it operational at 0.85 × VIN or higher; tie to VIN for continuous operation. |
| 2 | GND SENSE | power_in | Ground voltage sense connection that must be connected directly to the point of lowest potential in the application. |
| 3 | GND FORCE | power_in | Ground force connection that can be tied to GND SENSE when Kelvin connections are not needed. |
| 4 | DNC | unconnected | Do not connect to this pin. |
| 5 | DNC | unconnected | Do not connect to this pin. |
| 6 | VOUT FORCE | power_out | Reference voltage output (1.2 V nominal) that can source up to +10 mA and sink up to −3 mA. |
| 7 | VOUT SENSE | power_out | Reference voltage output sensing connection that should be connected directly to the voltage input of the load devices. |
| 8 | VIN | power_in | Input voltage connection with a specified range of 2.3 V to 5.5 V and an absolute maximum supply of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 1.1988 | 1.2 | 1.2012 | V | 3 | |
| Initial output voltage error | VOERR | -0.1 | 0.1 | % | 3 | ||
| Initial output voltage error | VOERR | -1.2 | 1.2 | mV | 3 | ||
| Temperature coefficient | TCVOUT | 2.5 | 4 | ppm/°C | −40°C ≤ TA ≤ +85°C | 3 | |
| Temperature coefficient | TCVOUT | 2.8 | 8 | ppm/°C | −40°C ≤ TA ≤ +125°C | 3 | |
| Line regulation | ΔVOUT/ΔVIN | 5 | 50 | ppm/V | VIN = 2.7 V to 5.5 V | 3 | |
| Line regulation | ΔVOUT/ΔVIN | 160 | ppm/V | VIN = 2.7 V to 5.5 V, −40°C ≤ TA ≤ +125°C | 3 | ||
| Load regulation (sourcing) | ΔVOUT/ΔIL | 14 | 30 | ppm/mA | Sourcing IL = 0 mA to 10 mA, VIN = 3.0 V, −40°C ≤ TA ≤ +125°C | 3 | |
| Load regulation (sinking) | ΔVOUT/ΔIL | 7 | 50 | ppm/mA | Sinking IL = 0 mA to −3 mA, VIN = 3.0 V, −40°C ≤ TA ≤ +125°C | 3 | |
| Output current capacity (sourcing) | IL | 10 | mA | Sourcing VIN = 3.0 V to 5.5 V | 3 | ||
| Output current capacity (sinking) | IL | -3 | mA | Sinking VIN = 3.0 V to 5.5 V | 3 | ||
| Quiescent current, normal operation | IQ | 85 | µA | ENABLE ≥ VIN × 0.85 | 3 | ||
| Quiescent current, normal operation | IQ | 100 | µA | ENABLE = VIN, −40°C ≤ TA ≤ +125°C | 3 | ||
| Quiescent current, shutdown | IQ | 5 | µA | ENABLE ≤ 0.7 V | 3 | ||
| Dropout voltage | VDO | 1 | 1.1 | V | IL = 0 mA, TA = −40°C ≤ TA ≤ +125°C | 3 | |
| Dropout voltage | VDO | 1 | 1.15 | V | IL = 2 mA, TA = −40°C ≤ TA ≤ +125°C | 3 | |
| Shutdown voltage | VL | 0 | 0.7 | V | 3 | ||
| ENABLE pin leakage current | IEN | 1 | 3 | µA | ENABLE = VIN, TA = −40°C ≤ TA ≤ +125°C | 3 | |
| Supply voltage | 6 | V | 4 | ||||
| Operating temperature range | -40 | 125 | °C | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Junction temperature range | -65 | 150 | °C | 4 | |||
| Input voltage range | VIN | 2.3 | 5.5 | V | 3 | ||
| Thermal resistance, junction to air (8-Lead MSOP) | θJA | 132.5 | °C/W | Worst-case, device soldered in circuit board | 4 | ||
| Thermal resistance, junction to case (8-Lead MSOP) | θJC | 43.9 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
ADR3512WCRMZ-R7 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
adr3512wcrmz-r7-etched.step/adr3512wcrmz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr3512wcrmz-r7.step/adr3512wcrmz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
505d9aa1de772402, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADR3512WCRMZ-R7
**Analog Devices** · Voltage References · MSOP-8
ADR3512WCRMZ-R7 from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENABLE | input | Enable connection that shuts the device down when at or below 0.7 V and makes it operational at 0.85 × VIN or higher; tie to VIN for continuous operation. |
| 2 | GND SENSE | power_in | Ground voltage sense connection that must be connected directly to the point of lowest potential in the application. |
| 3 | GND FORCE | power_in | Ground force connection that can be tied to GND SENSE when Kelvin connections are not needed. |
| 4 | DNC | unconnected | Do not connect to this pin. |
| 5 | DNC | unconnected | Do not connect to this pin. |
| 6 | VOUT FORCE | power_out | Reference voltage output (1.2 V nominal) that can source up to +10 mA and sink up to −3 mA. |
| 7 | VOUT SENSE | power_out | Reference voltage output sensing connection that should be connected directly to the voltage input of the load devices. |
| 8 | VIN | power_in | Input voltage connection with a specified range of 2.3 V to 5.5 V and an absolute maximum supply of 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Management |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 1.1988 | 1.2 | 1.2012 | V | | 3 |
| Initial output voltage error | VOERR | -0.1 | | 0.1 | % | | 3 |
| Initial output voltage error | VOERR | -1.2 | | 1.2 | mV | | 3 |
| Temperature coefficient | TCVOUT | | 2.5 | 4 | ppm/°C | −40°C ≤ TA ≤ +85°C | 3 |
| Temperature coefficient | TCVOUT | | 2.8 | 8 | ppm/°C | −40°C ≤ TA ≤ +125°C | 3 |
| Line regulation | ΔVOUT/ΔVIN | | 5 | 50 | ppm/V | VIN = 2.7 V to 5.5 V | 3 |
| Line regulation | ΔVOUT/ΔVIN | | | 160 | ppm/V | VIN = 2.7 V to 5.5 V, −40°C ≤ TA ≤ +125°C | 3 |
| Load regulation (sourcing) | ΔVOUT/ΔIL | | 14 | 30 | ppm/mA | Sourcing IL = 0 mA to 10 mA, VIN = 3.0 V, −40°C ≤ TA ≤ +125°C | 3 |
| Load regulation (sinking) | ΔVOUT/ΔIL | | 7 | 50 | ppm/mA | Sinking IL = 0 mA to −3 mA, VIN = 3.0 V, −40°C ≤ TA ≤ +125°C | 3 |
| Output current capacity (sourcing) | IL | 10 | | | mA | Sourcing VIN = 3.0 V to 5.5 V | 3 |
| Output current capacity (sinking) | IL | -3 | | | mA | Sinking VIN = 3.0 V to 5.5 V | 3 |
| Quiescent current, normal operation | IQ | | | 85 | µA | ENABLE ≥ VIN × 0.85 | 3 |
| Quiescent current, normal operation | IQ | | | 100 | µA | ENABLE = VIN, −40°C ≤ TA ≤ +125°C | 3 |
| Quiescent current, shutdown | IQ | | | 5 | µA | ENABLE ≤ 0.7 V | 3 |
| Dropout voltage | VDO | | 1 | 1.1 | V | IL = 0 mA, TA = −40°C ≤ TA ≤ +125°C | 3 |
| Dropout voltage | VDO | | 1 | 1.15 | V | IL = 2 mA, TA = −40°C ≤ TA ≤ +125°C | 3 |
| Shutdown voltage | VL | 0 | | 0.7 | V | | 3 |
| ENABLE pin leakage current | IEN | | 1 | 3 | µA | ENABLE = VIN, TA = −40°C ≤ TA ≤ +125°C | 3 |
| Supply voltage | | | | 6 | V | | 4 |
| Operating temperature range | | -40 | | 125 | °C | | 4 |
| Storage temperature range | | -65 | | 150 | °C | | 4 |
| Junction temperature range | | -65 | | 150 | °C | | 4 |
| Input voltage range | VIN | 2.3 | | 5.5 | V | | 3 |
| Thermal resistance, junction to air (8-Lead MSOP) | θJA | | 132.5 | | °C/W | Worst-case, device soldered in circuit board | 4 |
| Thermal resistance, junction to case (8-Lead MSOP) | θJC | | 43.9 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `ADR3512WCRMZ-R7`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `adr3512wcrmz-r7-etched.step` / `adr3512wcrmz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adr3512wcrmz-r7.step` / `adr3512wcrmz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADR3512.pdf) (16 pp, sha256 `505d9aa1de772402`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adr3512wcrmz-r7-datasheet.pdf)