Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADR3433ARJZ-R2

Analog Devices · Voltage References · SOT-23-6

ADR3433ARJZ-R2 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND FORCE power_in Ground force connection; see the Applications Information section for force/sense connections.
2 GND SENSE power_in Ground voltage sense connection; connect directly to the point of lowest potential in the application.
3 ENABLE input Enables or disables the device; enable voltage is VIN × 0.85 to VIN and shutdown voltage is 0 V to 0.7 V (ADR3412 table).
4 VIN power_in Input voltage connection; 3.5 V to 5.5 V for the ADR3433 per the selection guide, with a 6 V supply voltage absolute maximum.
5 VOUT SENSE input Reference voltage output sensing connection; connect directly to the voltage input of the load devices.
6 VOUT FORCE power_out Reference voltage output (3.300 V for the ADR3433), sourcing up to 10 mA and sinking up to 3 mA per the features list.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 3.2967 3.3 3.3033 V VIN = 3.5 V to 5.5 V, IL = 0 mA, TA = 25°C 7
Initial Accuracy VOERR -0.1 0.1 % 7
Initial Accuracy VOERR -3.3 3.3 mV 7
Temperature Coefficient TCVOUT 8 ppm/°C -40°C ≤ TA ≤ +125°C 7
Line Regulation ΔVO/ΔVIN 5 50 ppm/V VIN = 3.5 V to 5.5 V 7
Line Regulation ΔVO/ΔVIN 120 ppm/V VIN = 3.5 V to 5.5 V, -40°C ≤ TA ≤ +125°C 7
Load Regulation, Sourcing ΔVO/ΔIL 9 30 ppm/mA IL = 0 mA to 10 mA, VIN = 3.8 V, -40°C ≤ TA ≤ +125°C 7
Load Regulation, Sinking ΔVO/ΔIL 10 50 ppm/mA IL = 0 mA to -3 mA, VIN = 3.8 V, -40°C ≤ TA ≤ +125°C 7
Output Current Capacity, Sourcing IL 10 mA VIN = 3.8 V to 5.5 V 7
Output Current Capacity, Sinking IL -3 mA VIN = 3.8 V to 5.5 V 7
Quiescent Current, Normal Operation IQ 85 μA ENABLE > VIN × 0.85 7
Quiescent Current, Normal Operation IQ 100 μA ENABLE = VIN, -40°C ≤ TA ≤ +125°C 7
Quiescent Current, Shutdown IQ 5 μA ENABLE < 0.7 V 7
Dropout Voltage VDO 50 200 mV IL = 0 mA, -40°C ≤ TA ≤ +125°C 7
Dropout Voltage VDO 75 250 mV IL = 2 mA, -40°C ≤ TA ≤ +125°C 7
ENABLE Shutdown Voltage VL 0 0.7 V 7
ENABLE Pin Leakage Current IEN 0.85 3 μA ENABLE = VIN, -40°C ≤ TA ≤ +125°C 7
Supply Voltage 6 V TA = 25°C 10
VIN Minimum Slew Rate 0.1 V/ms 10
Operating Temperature Range -40 125 °C 10
Storage Temperature Range -65 125 °C 10
Junction Temperature Range -65 150 °C 10
Thermal Resistance Junction-to-Ambient θJA 230 °C/W 6-Lead SOT-23 (RJ-6) 10
Thermal Resistance Junction-to-Case θJC 92 °C/W 6-Lead SOT-23 (RJ-6) 10
Output Voltage Noise en p-p 25 μV p-p f = 0.1 Hz to 10 Hz 7
Output Voltage Noise en p-p 46 μV rms f = 10 Hz to 10 kHz 7
Output Voltage Noise Density en 1.2 μV/√Hz f = 1 kHz 7
Output Voltage Hysteresis ΔVOUT_HYS 70 ppm TA = +25°C to -40°C to +125°C to +25°C 7
Ripple Rejection Ratio RRR -60 dB fIN = 60 Hz 7
Long-Term Stability ΔVOUT_LTD 30 ppm 1000 hours at 50°C 7
Turn-On Settling Time tR 750 μs CIN = 0.1 μF, CL = 0.1 μF, RLoad = 1 kΩ 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADR3433ARJZ-R2
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adr3433arjz-r2-etched.step / adr3433arjz-r2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adr3433arjz-r2.step / adr3433arjz-r2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 5d34ab953bee1aa6, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF