component
ADR06BRZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage References, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADR06BRZ-REEL7
Analog Devices · Voltage References · SOIC-8
ADR06BRZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | No internal connect. |
| 2 | VIN | power_in | Input supply voltage; ADR06 operating range is 5.0 V to 36.0 V. |
| 3 | TEMP | output | Temperature-sensing output that can be used with an external buffer and a simple resistor network for temperature sensing and approximation. |
| 4 | GND | power_in | Ground. |
| 5 | TRIM | passive | Trim pin provided for fine adjustment of the output voltage. |
| 6 | VOUT | power_out | 3.0 V reference output, capable of high output current of 10 mA. |
| 7 | NIC | unconnected | No internal connect. |
| 8 | NIC | unconnected | No internal connect. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (B grade) | VO | 2.997 | 3 | 3.003 | V | B grade | 7 |
| Initial accuracy (B grade) | VOERR | -3 | 3 | mV | B grade | 7 | |
| Initial accuracy (B grade) | VOERR | -0.1 | 0.1 | % | B grade | 7 | |
| Temperature coefficient | TCVO | 1 | 3 | ppm/°C | B grade, 8-lead SOIC, −40°C < TA < +125°C | 7 | |
| Dropout voltage | VDO | 2 | V | 7 | |||
| Line regulation | ∆VO/∆VIN | 7 | 30 | ppm/V | VIN = 5.0 V to 36.0 V, −40°C < TA < +125°C | 7 | |
| Load regulation | ∆VO/∆ILOAD | 40 | 70 | ppm/mA | ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 7.0 V | 7 | |
| Quiescent current | IIN | 0.65 | 1 | mA | No load, −40°C < TA < +125°C | 7 | |
| Long-term stability | ΔVOUT_LTD | 50 | ppm | 1000 hours | 4 | ||
| Output voltage hysteresis | ΔVOUT_HYS | 70 | ppm | 4 | |||
| Short circuit to GND current | ISC | 30 | mA | 7 | |||
| Ripple rejection ratio | RRR | -75 | dB | fIN = 10 kHz | 7 | ||
| Turn-on settling time | tR | 4 | µs | 7 | |||
| Voltage noise, peak-to-peak | eN p-p | 6 | µV p-p | 0.1 Hz to 10.0 Hz | 7 | ||
| Voltage noise, peak-to-peak | eN p-p | 2 | ppm p-p | 0.1 Hz to 10.0 Hz | 7 | ||
| Voltage noise density | eN | 127 | nV/√Hz | 1 kHz | 7 | ||
| Voltage output at TEMP pin | VTEMP | 550 | mV | 7 | |||
| Temperature sensitivity at TEMP pin | TCVTEMP | 1.96 | mV/°C | 7 | |||
| Supply voltage (absolute maximum) | 36 | V | 8 | ||||
| Storage range | TSTG | -65 | 150 | °C | 8 | ||
| Operating range | TA | -40 | 125 | °C | 8 | ||
| Junction range | TJ | -65 | 150 | °C | 8 | ||
| Lead soldering | 300 | °C | 60 sec | 8 | |||
| Input supply voltage (recommended operating) | VIN | 5 | 36 | V | Printed in electrical table header for ADR06 (TA = 25°C unless otherwise noted) | 7 | |
| Junction-to-ambient thermal resistance, 8-lead SOIC (R-8) | θJA | 130 | °C/W | Worst case, device soldered in circuit board (surface-mount) | 8 | ||
| Junction-to-case thermal resistance, 8-lead SOIC (R-8) | θJC | 43 | °C/W | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | between base and emitter (VBE) produces a proportional-toabsolute temperature current (PTAT) in R14, and, when | 16 |
CAD (KiCad official)
- Symbol:
ADR06BRZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
adr06brz-reel7-etched.step/adr06brz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adr06brz-reel7.step/adr06brz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (21 pp, sha256
99da457627c678c4, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).