ADR02WARZ-REEL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NIC	unconnected	No internal connect.
2	VIN	power_in	Supply input; the ADR02 operates from 7.0 V to 36.0 V.
3	TEMP	output	Temperature-sensing output that can be used with an external buffer and a simple resistor network for temperature sensing and approximation.
4	GND	power_in	Ground.
5	TRIM	input	Trim pin for fine adjustment of the output voltage.
6	VOUT	power_out	Reference output of 5.0 V for the ADR02, with output current up to 10 mA.
7	NIC	unconnected	No internal connect.
8	NIC	unconnected	No internal connect.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SOIC-8
Category	Power Supply Chip
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Output Voltage	VO	4.995	5	5.005	V	A and C grades, TA = 25°C	5
Initial Accuracy	VOERR	-5		5	mV	A and C grades, TA = 25°C	5
Initial Accuracy	VOERR	-0.1		0.1	%	A and C grades, TA = 25°C	5
Temperature Coefficient	TCVO		3	10	ppm/°C	A grade, 8-lead SOIC, −40°C < TA < +125°C	5
Line Regulation	∆VO/∆VIN		7	30	ppm/V	VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for ADR02WARZ, −40°C < TA < +125°C	5
Load Regulation	∆VO/∆ILOAD		40	70	ppm/mA	ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 10.0 V	5
Quiescent Current	IIN		0.65	1	mA	No load, −40°C < TA < +125°C	5
Supply Voltage Range (electrical characteristics condition)	VIN	7		26	V	VIN = 7.0 V to 26.0 V for ADR02WARZ	5
Dropout Voltage	VDO		2		V		5
Voltage Noise	eN p-p		10		µV p-p	0.1 Hz to 10.0 Hz	5
Voltage Noise	eN p-p		2		ppm p-p	0.1 Hz to 10.0 Hz	5
Voltage Noise Density	eN		240		nV/√Hz	1 kHz	5
Turn-On Settling Time	tR		4		µs		5
Long-Term Stability	ΔVOUT_LTD		50		ppm	1000 hours	5
Output Voltage Hysteresis	∆VOUT_HYS		70		ppm		5
Ripple Rejection Ratio	RRR		-75		dB	fIN = 10 kHz	5
Short Circuit to GND	ISC		30		mA		5
Voltage Output at TEMP Pin	VTEMP		550		mV		5
Temperature Sensitivity	TCVTEMP		1.96		mV/°C		5
Supply Voltage				36	V	Ratings at 25°C	8
Storage Temperature Range		-65		150	°C		8
Operating Temperature Range		-40		125	°C		8
Junction Temperature Range		-65		150	°C		8
Lead Temperature (Soldering, 60 sec)				300	°C		8
Thermal Resistance Junction-to-Ambient	θJA		130		°C/W	8-Lead SOIC (R-8), worst-case, device soldered in circuit board	8
Thermal Resistance Junction-to-Case	θJC		43		°C/W	8-Lead SOIC (R-8)	8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
housing	abs		between base and emitter (VBE) produces a proportional-toabsolute temperature current (PTAT) in R14, and, when	16

CAD (KiCad official)

Symbol: ADR02WARZ-REEL
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)
3D model files: adr02warz-reel-etched.step / adr02warz-reel-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adr02warz-reel.step / adr02warz-reel.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (21 pp, sha256 99da457627c678c4, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

ADR02WARZ-REEL

Verified ADR02WARZ-REEL

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README