ADP1613ARMZ-R7

{
  "slug": "adp1613armz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "adp1613armz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adp1613armz-r7.kicad_sym",
    "adp1613armz-r7.kicad_mod",
    "adp1613armz-r7.glb",
    "adp1613armz-r7.step",
    "adp1613armz-r7.lbr",
    "docs/hero.png",
    "docs/adp1613armz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adp1613armz-r7-hero.glb",
    "adp1613armz-r7-hero.overlay.json",
    "adp1613armz-r7-etched.glb"
  ],
  "component": {
    "mpn": "ADP1613ARMZ-R7",
    "manufacturer": "Analog Devices",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586195512307421184",
    "parts": {
      "symbol": "adp1613armz-r7.kicad_sym",
      "footprint": "adp1613armz-r7.kicad_mod",
      "model_3d": "adp1613armz-r7-hero.glb",
      "model_3d_plain": "adp1613armz-r7-etched.glb",
      "model_3d_step": "adp1613armz-r7-etched.step",
      "model_3d_step_plain": "adp1613armz-r7.step",
      "lbr": "adp1613armz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C132279"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T22:40:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "COMP",
        "type": "input",
        "description": "Compensation input; connect a series resistor-capacitor network from COMP to GND to compensate the regulator."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Output voltage feedback input; connect a resistive divider from the output voltage to FB to set the regulator output, with a feedback voltage of 1.215 V to 1.255 V (1.235 V typical)."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input; drive EN low to shut down the regulator and high to turn it on, with VIL of 0.3 V max and VIH of 1.6 V min."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switching output; connect the power inductor from the input voltage to SW and the external rectifier from SW to the output voltage, with SW to GND rated at 21 V maximum."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Main power supply input; supplies the internal circuitry from 1.8 V to 5.5 V for the ADP1612 or 2.5 V to 5.5 V for the ADP1613, and should be bypassed to GND with a 10 µF or greater capacitor placed as close to the device as possible."
      },
      {
        "number": "7",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency setting input; connect to GND for 650 kHz, connect to VIN for 1.3 MHz, and note that the part defaults to 650 kHz if FREQ is left floating."
      },
      {
        "number": "8",
        "name": "SS",
        "type": "input",
        "description": "Soft-start timing capacitor input; a capacitor from SS to GND brings up the output slowly at power-up and reduces inrush current."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 9,
        "cost_usd": 0.0439,
        "at": "2026-10-17T22:38:37"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586195512307421184",
        "pages": 28,
        "sha256": "a5ef891354796c03",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adp1613armz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adp1613armz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d2f6b93a687f90828de5836147a36ec821bb97d2f8639acbd64e903d0d035bd3",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}