component
ADP160AUJZ-2.8-R7
Public Made by Adomby adom
Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 13d ago |
| viewers | 13d ago |
| adp160aujz-2-8-r7-etched.glb | 13d ago |
| adp160aujz-2-8-r7-etched.step | 13d ago |
| adp160aujz-2-8-r7-hero.glb | 13d ago |
| adp160aujz-2-8-r7-hero.overlay.json | 13d ago |
| adp160aujz-2-8-r7.glb | 13d ago |
| adp160aujz-2-8-r7.kicad_mod | 13d ago |
| adp160aujz-2-8-r7.kicad_sym | 13d ago |
| adp160aujz-2-8-r7.lbr | 13d ago |
| adp160aujz-2-8-r7.step | 13d ago |
| package.json | 13d ago |
| page.json | 13d ago |
| README.md | 13d ago |
ADP160AUJZ-2.8-R7
Analog Devices · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5
ADP160AUJZ-2.8-R7 from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input supply, which operates from 2.2 V to 5.5 V and should be bypassed to GND with a 1 µF or greater capacitor. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Enable input that turns the regulator on when driven high (minimum 1.2 V) and off when driven low (maximum 0.4 V), and is connected to VIN for automatic startup. |
| 4 | NC | unconnected | No connect pin that is not connected internally, so it should be tied to GND or left open. |
| 5 | VOUT | power_out | Regulated output voltage, which should be bypassed to GND with a 1 µF or greater capacitor and can deliver up to 150 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.2 | 5.5 | V | TJ = −40°C to +125°C | 3 | |
| Operating supply current | IGND | 560 | 1250 | nA | IOUT = 0 μA | 3 | |
| Operating supply current | IGND | 2.3 | μA | IOUT = 0 μA, TJ = −40°C to +125°C | 3 | ||
| Operating supply current | IGND | 860 | 1800 | nA | IOUT = 1 μA | 3 | |
| Operating supply current | IGND | 2.8 | μA | IOUT = 1 μA, TJ = −40°C to +125°C | 3 | ||
| Operating supply current | IGND | 2.6 | 4.5 | μA | IOUT = 100 μA | 3 | |
| Operating supply current | IGND | 5.8 | μA | IOUT = 100 μA, TJ = −40°C to +125°C | 3 | ||
| Operating supply current | IGND | 19 | μA | IOUT = 10 mA, TJ = −40°C to +125°C | 3 | ||
| Operating supply current | IGND | 65 | μA | IOUT = 150 mA, TJ = −40°C to +125°C | 3 | ||
| Shutdown current | IGND-SD | 1 | μA | EN = GND, TJ = −40°C to +125°C | 3 | ||
| Output voltage accuracy | VOUT | -1 | 1 | % | IOUT = 10 mA | 3 | |
| Output voltage accuracy | VOUT | -2 | 2 | % | 0 μA < IOUT < 150 mA, VIN = (VOUT + 0.5 V) to 5.5 V | 3 | |
| Output voltage accuracy | VOUT | -3.5 | 3.5 | % | 0 μA < IOUT < 150 mA, VIN = (VOUT + 0.5 V) to 5.5 V, TJ = −40°C to +125°C | 3 | |
| Line regulation | ΔVOUT/ΔVIN | -0.1 | 0.1 | %/V | VIN = (VOUT + 0.5 V) to 5.5 V, TJ = −40°C to +125°C | 3 | |
| Load regulation | ΔVOUT/ΔIOUT | 0.01 | %/mA | IOUT = 100 μA to 150 mA, TJ = −40°C to +125°C | 3 | ||
| Dropout voltage (5-lead TSOT) | VDROPOUT | 15 | mV | IOUT = 10 mA, TJ = −40°C to +125°C | 3 | ||
| Dropout voltage (5-lead TSOT) | VDROPOUT | 225 | mV | IOUT = 150 mA, TJ = −40°C to +125°C | 3 | ||
| Active pull-down resistance (ADP160/ADP161) | TSHUTDOWN | 300 | 600 | Ω | VOUT = 2.8 V, RLOAD = ∞ | 3 | |
| Current limit threshold | ILIMIT | 220 | 320 | 500 | mA | 3 | |
| EN input leakage current | VI-LEAKAGE | 1 | μA | EN = VIN or GND, TJ = −40°C to +125°C | 3 | ||
| EN input logic high | VIH | 1.2 | V | 2.2 V ≤ VIN ≤ 5.5 V | 3 | ||
| EN input logic low | VIL | 0.4 | V | 2.2 V ≤ VIN ≤ 5.5 V | 3 | ||
| Minimum input and output capacitance | CMIN | 0.7 | μF | TA = −40°C to +125°C | 4 | ||
| Capacitor ESR | RESR | 0.001 | 0.2 | Ω | TA = −40°C to +125°C | 4 | |
| VIN to GND | -0.3 | 6.5 | V | 5 | |||
| VOUT to GND | -0.3 | V | 5 | ||||
| EN to GND | -0.3 | V | 5 | ||||
| NC to GND | -0.3 | V | 5 | ||||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | 5 | ||
| Operating ambient temperature range | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (5-lead TSOT) | θJA | 170 | °C/W | 5 | |||
| Junction-to-board thermal characterization parameter (5-lead TSOT) | ΨJB | 43 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | of copper used to solder the package GND pins to the PCB. | 16 |
CAD (KiCad official)
- Symbol:
ADP160AUJZ-2.8-R7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
adp160aujz-2-8-r7-etched.step/adp160aujz-2-8-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adp160aujz-2-8-r7.step/adp160aujz-2-8-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
c3c45a3dc7e3598e, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).