Adom Fields

@@ -10,7 +10,7 @@ checksum = "320119579fcad9c21884f5c4861d16174d0e06250625266f50fe6898340abefa"  [[package]] name = "adom-fields"-version = "0.9.3"+version = "0.9.4" dependencies = [  "clap",  "png",

@@ -1,6 +1,6 @@ [package] name = "adom-fields"-version = "0.9.3"+version = "0.9.4" edition = "2021" license = "MIT" description = "Adom Fields: where the current and the heat go on your board. Current density, copper heat flow and board temperature from the board file itself, in 3D, for the AI to drive and the human to explore."

@@ -1,4 +1,4 @@-# adom-fields 0.9.3+# adom-fields 0.9.3 and 0.9.4  - **Fix and verify (`adom-fields verify`).**   - **What it does:** carries out fix-plan steps on a copy of the board file, solves the copy, and reports what the fix did. That is: the issues cleared and new, every solved number that moved and in which direction, and (with `--refill`) the DRC errors the fix introduced.@@ -10,3 +10,5 @@     - **Widening:** widening the four worst necks' traces (1.0 mm to between 1.1 and 2.0 mm, as clearance allows) lowers the Joule loss and every hot part by about 0.5 °C.     - **What the report also shows:** +VBAT's peak cell moves to the corner where a 2 mm segment meets one that could only reach 1.1 mm, and the neck issues remain. The traces are boxed in, and the real fix there is a layout change.   - **An earlier pass caught its own mistake:** it widened two neighbouring nets (+VBAT and the C-phase output) against the original geometry. KiCad's DRC reported four new clearance errors, and the edits now see each other.++0.9.4 is 0.9.3 as installed by `pkg install` (the same features).

@@ -1,7 +1,7 @@ {   "slug": "adom-fields",   "type": "app",-  "version": "0.9.3",+  "version": "0.9.4",   "title": "Adom Fields",   "brief": "Adom Fields: where the current and the heat go on your board.",   "summary": "Current density on the copper, heat flow through the pours and the vias, and the temperature over the board, solved from the board file itself and shown on the board in 3D. The AI does the analysis and drives the view; the human orbits, zooms, hovers for the number under the cursor, and reads the nets by what they carry and the issues by what to fix. A step in Adom's AI Flow: the walkthrough goes into the video.",

@@ -1,7 +1,7 @@ {   "slug": "adom-fields",   "type": "app",-  "version": "0.9.3",+  "version": "0.9.4",   "title": "Adom Fields",   "brief": "Adom Fields: where the current and the heat go on your board.",   "summary": "Current density on the copper, heat flow through the pours and the vias, and the temperature over the board, solved from the board file itself and shown on the board in 3D. The AI does the analysis and drives the view; the human orbits, zooms, hovers for the number under the cursor, and reads the nets by what they carry and the issues by what to fix. A step in Adom's AI Flow: the walkthrough goes into the video.",@@ -17,10 +17,7 @@     "vias",     "3d",     "analysis",-    "eda",-    "current flow animation",-    "voltage",-    "river"+    "eda"   ],   "status": "live",   "discovery_pitch": "Solve where the current and the heat go on a KiCad board and show it on the board in 3D: current density per net, heat flow per layer with the vias, temperature over the board, the nets by what they carry, the issues with the fix. One command to solve, one to serve, one to drive it on camera.",@@ -40,10 +37,11 @@     "fields",     "flow of current",     "river view",-    "voltage drop in 3d",-    "ground bounce",+    "energy flow on a board",+    "poynting vector",+    "speed of light on a pcb",+    "electron drift speed",     "exploded layer stack",-    "current through vias",     "explain the view out loud",     "narrate the fields",     "energy cycle",@@ -85,20 +83,7 @@     "anti-resonance",     "input filter stability",     "middlebrook",-    "ngspice pdn",-    "signals view",-    "copper capacitance",-    "switch node capacitance",-    "plane capacitance",-    "differential pair skew",-    "six layer board",-    "receiver frequency plan",-    "lo leakage",-    "tone in band",-    "rf crosstalk",-    "return path over supply plane",-    "antenna ground loop",-    "stage feed bypass"+    "ngspice pdn"   ],   "sample_prompts": [     {@@ -139,4 +124,4 @@     "name": "John Lauer",     "email": "[email protected]"   }-}\ No newline at end of file+}