← Commit history

Add unreleased nominal spacer drawing for prototype fit review

John Lauer ·f32581e954 · ·parent 492ae82
2 files changed +6
mechanical/board32-selected-cooling/README.md+2
@@ -17,3 +17,5 @@ For a prototype, establish the independently supported sink datum and actual Q1 `spacer = case-to-sink separation - isolator thickness - three grease films`  `tools/select_cooling_spacer.py` is a calculation worksheet. The committed nominal example returns 2.10 mm and explicitly is not a real measurement. Manufacturing error, flatness, preload and film behavior remain additional requirements. A changed adopted stack requires renewed thermal checks. This selective-fit approach is a prototype assembly proposal, not a released production tolerance scheme.++[Nominal spacer drawing](spacer-nominal-drawing.svg) shows the 14 × 20 mm face, Ø3.2 mm hole and nominal 2.10 mm thickness. It is explicitly unreleased; no unspecified shop tolerances are implied.
mechanical/board32-selected-cooling/spacer-nominal-drawing.svgadded+4
@@ -0,0 +1,4 @@+<svg xmlns="http://www.w3.org/2000/svg" width="1000" height="760" viewBox="0 0 1000 760">+<rect width="1000" height="760" fill="white"/><g font-family="sans-serif" fill="#16212d"><text x="50" y="50" font-size="26">Q1 copper spacer — nominal design study</text><text x="50" y="82" font-size="17">C11000 · dimensions in mm · NOT RELEASED FOR MANUFACTURE</text></g>+<g stroke="#16212d" fill="none" stroke-width="2"><rect x="150" y="170" width="210" height="300"/><circle cx="255" cy="245" r="24"/><path d="M255 150V490 M130 245H380" stroke-dasharray="8 5" stroke-width="1"/><path d="M150 140H360 M150 130V160 M360 130V160 M110 170V470 M100 170H140 M100 470H140 M400 170V245 M390 170H410 M390 245H410 M279 245L455 210H580"/><rect x="650" y="170" width="31.5" height="300"/><path d="M650 140H681.5 M650 130V160 M681.5 130V160"/></g>+<g font-family="sans-serif" font-size="18" fill="#16212d"><text x="245" y="125">14</text><text x="63" y="325">20</text><text x="417" y="215">5</text><text x="460" y="199">Ø3.2 through</text><text x="615" y="122">2.10 nominal</text><text x="192" y="505">Face view</text><text x="620" y="505">Edge view</text><text x="50" y="555">Hole centered across width: 7 mm from either long edge.</text><text x="50" y="589">Final thickness: measured case-to-sink separation − isolator − three controlled films.</text><text x="50" y="623">Thickness tolerance, flatness, parallelism, finish and edge treatment: UNRELEASED.</text><text x="50" y="657">Do not force contact by bending device leads. Support sink independently.</text><text x="50" y="691">Reference: design/cooling-assembly.json · Board32 · 12 October 2026</text></g></svg>