project
Adom Custom Electronic Load
Public Made by Adomby adom
Two-layer digitally controlled electronic-load prototype. Compact R11 is under active electrical, cooling and probe-access review; not a manufacturing release.
← Commit history
Identify thermal-compound candidate and preserve interface qualification limits
2 files changed
+37−12
design/mechanical-bom.csv+12−12@@ -1,12 +1,12 @@-reference,manufacturer,part,quantity_basis,status,notes,evidence-HS1,Wakefield,125319,1 stock yields up to 3 selected cuts,selected thermal model,76.2mm cut from 304.8 mm stock; three carrier bores plus Q1 pilot/tap,mechanical/passive-contact-study/machining-review.json-FAN1,Sunon,MF40200V1-1000U-G99,1,selected,Tach feedback mandatory; 3-wire harness,components/mf40200v1-1000u-g99-GUARD1,Sunon,FG-4,1,candidate,Manufacturer overall dimensions; visual wire paths approximate,mechanical/fan-guard-study/review.json-INS1,Custom supplier,AlN14x20x0.635,1,"nominal design, quote required",3.2mm hole; drawings/tolerances and supplied thermal properties unqualified,mechanical/passive-contact-study/review.json-SPACER1,In-house/custom,C11000-14x20x2.10,1,"nominal design, quote required",3.2mm hole; flatness and thickness release pending,mechanical/passive-contact-study/review.json-TIM1,Not yet selected,Thermal grease,3 interfaces,model assumption,20 um nominal films; area-resistance model is not a purchased-material guarantee,mechanical/passive-contact-study/review.json-Q1_SCREW,NBK,SPE-M3-10-P,1,candidate,PEEK M3x10 into proposed sink tap; preload/creep not qualified,mechanical/passive-contact-study/review.json-FAN_SCREW,Accu,SSB-M3-30-A4,4,candidate,Install before cooler; nominal geometry only,mechanical/fan-guard-study/hardware-selection.json-FAN_WASHER,Accu,HPW-M3-A2,4,candidate,Nominal washer envelope,mechanical/fan-guard-study/hardware-selection.json-FAN_NUT,Accu,HNN-M3-A4,4,candidate,Temperature/preload qualification open,mechanical/fan-guard-study/hardware-selection.json-CARRIER,Custom,Independent sink/fan carrier,1,geometry study,"Material,PCB edge retention and structural tolerances not released",mechanical/fan-guard-study/lifted-carrier/carrier-top-access-review.json+reference,manufacturer,part,quantity_basis,status,notes,evidence +HS1,Wakefield,125319,1 stock yields up to 3 selected cuts,selected thermal model,76.2mm cut from 304.8 mm stock; three carrier bores plus Q1 pilot/tap,mechanical/passive-contact-study/machining-review.json +FAN1,Sunon,MF40200V1-1000U-G99,1,selected,Tach feedback mandatory; 3-wire harness,components/mf40200v1-1000u-g99 +GUARD1,Sunon,FG-4,1,candidate,Manufacturer overall dimensions; visual wire paths approximate,mechanical/fan-guard-study/review.json +INS1,Custom supplier,AlN14x20x0.635,1,"nominal design, quote required",3.2mm hole; drawings/tolerances and supplied thermal properties unqualified,mechanical/passive-contact-study/review.json +SPACER1,In-house/custom,C11000-14x20x2.10,1,"nominal design, quote required",3.2mm hole; flatness and thickness release pending,mechanical/passive-contact-study/review.json +TIM1,Wakefield,122-10CC,3 interfaces,candidate; availability and process unverified,10 cc pack candidate; three interfaces; model uses typical 122-series area resistance. No guaranteed installed performance.,mechanical/board32-selected-cooling/interface-material-review.json +Q1_SCREW,NBK,SPE-M3-10-P,1,candidate,PEEK M3x10 into proposed sink tap; preload/creep not qualified,mechanical/passive-contact-study/review.json +FAN_SCREW,Accu,SSB-M3-30-A4,4,candidate,Install before cooler; nominal geometry only,mechanical/fan-guard-study/hardware-selection.json +FAN_WASHER,Accu,HPW-M3-A2,4,candidate,Nominal washer envelope,mechanical/fan-guard-study/hardware-selection.json +FAN_NUT,Accu,HNN-M3-A4,4,candidate,Temperature/preload qualification open,mechanical/fan-guard-study/hardware-selection.json +CARRIER,Custom,Independent sink/fan carrier,1,geometry study,"Material,PCB edge retention and structural tolerances not released",mechanical/fan-guard-study/lifted-carrier/carrier-top-access-review.json
mechanical/board32-selected-cooling/interface-material-review.jsonadded+25@@ -0,0 +1,25 @@+{+ "status": "candidate-review-not-adopted",+ "modelBasisCandidate": {+ "manufacturer": "Wakefield",+ "series": "122",+ "orderCode": "122-10CC",+ "pack": "10 cc syringe",+ "source": "https://wakefieldthermal.com/content/catalogs/thermal-management-accessories-wakefield.pdf",+ "typicalConductivityWmK": 2.5,+ "typicalAreaResistanceCIn2W": 0.02,+ "limitation": "Legacy manufacturer catalog supplies an order code and the same typical resistance used by the model; availability and actual bond-line pressure/thickness remain unverified."+ },+ "alternativeReviewed": {+ "manufacturer": "Henkel",+ "part": "BERGQUIST TGR 4000",+ "source": "https://datasheets.tdx.henkel.com/BERGQUIST-TGR-4000-en_GL.pdf",+ "finding": "TO-220 reference performance is pressure dependent and compound contains electrically conductive filler. Not substituted into the existing area-resistance model."+ },+ "releaseDependencies": [+ "Confirmed available supply and current technical specification for the selected compound",+ "Specified bond line and sustained clamp pressure compatible with AlN and PEEK fastener",+ "Thermal and insulation verification on actual stack; neither grease serves as the qualified isolation barrier"+ ],+ "noChangeToFormalThermalModel": true+}