AI Flow

@@ -1,6 +1,6 @@ # AI Flow run: Codex (Astra) on board-0 -**Running**: step `routing`, 64.6 min since the prompt. This page updates at every step change.+**Running**: step `pours`, 70.9 min since the prompt. This page updates at every step change.  Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). @@ -10,13 +10,13 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from |---|---|---|---|---|---|---|---| | intake | 3.1 | 3.1 | 0.0 | 2 | 0 | 0 | 2.0 min | | placement | 6.4 | 5.6 | 0.8 | 16 | 3 | 2 | 2.0 min |-| routing | 33.4 | 13.4 | 19.9 | 27 | 5 | 4 | 7.7 min |-| pours | 13.8 | 5.5 | 8.2 | 28 | 3 | 2 | 1.0 min |+| routing | 39.4 | 19.1 | 20.3 | 33 | 5 | 4 | 7.7 min |+| pours | 14.0 | 5.5 | 8.4 | 29 | 4 | 3 | 1.0 min | | current | 1.4 | 0.7 | 0.7 | 4 | 2 | 1 | 0.4 min | | thermal | 1.4 | 1.1 | 0.3 | 4 | 2 | 1 | 0.7 min | | capture | 5.2 | 4.2 | 1.0 | 2 | 1 | 0 | 4.2 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| **total** | **64.6** | **33.7** | **30.9** | | | | |+| **total** | **70.9** | **39.4** | **31.5** | | | | |  ## Returns to earlier steps @@ -30,6 +30,7 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from - 2026-09-14T04:12:47Z back to **current** (visit 2): Recheck all loaded nets after the connected phase-B thermal extension and native refill. - 2026-09-14T04:13:20Z back to **thermal** (visit 2): All seven current checks pass after the phase-B extension; reevaluate Q4 against the same 60 C rise budget. - 2026-09-14T04:18:28Z back to **routing** (visit 5): Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.+- 2026-09-14T04:24:40Z back to **pours** (visit 4): Remeasure native filled copper after the final via-spacing repair.  ## Decisions along the way @@ -60,6 +61,8 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from - 2026-09-14T04:13:23Z clip-start:thermal-2 - 2026-09-14T04:14:12Z clip-start:capture-1 - 2026-09-14T04:18:37Z clip-start:routing-5+- 2026-09-14T04:24:34Z Via repair passed native and canonical gates: zero unconnected, 13 inherited errors, zero hole-spacing warnings. Replaced one GND_OUT via and added two short links; all verification and recovery time remains counted.+- 2026-09-14T04:24:52Z clip-start:pours-4  ## Where the board stands @@ -343,20 +346,39 @@ What this step does: route to 100 percent with the spec's rules, gate with KiCad  Why the AI came back here: Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish. -**Clip: routing, visit 5 (rework), still recording (started 2026-09-14T04:18:37Z); it appears here when the step ends.**+**Clip: routing, visit 5 (rework), the PCB editor from 2026-09-14T04:18:37Z to 2026-09-14T04:24:46Z, 6.1 min of real time shown at 10x (36 s).**++<video width="100%" controls><source src="/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/routing-5.mp4" type="video/mp4"></video>  **Screenshot: the board when routing, visit 5 (rework) began.**  ![the board when routing, visit 5 (rework) began](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-routing-5-start.png) +**Screenshot: the board when routing, visit 5 (rework) ended.**++![the board when routing, visit 5 (rework) ended](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-routing-5-end.png)++### pours, visit 4 (rework)++What this step does: pour every net the spec names, keepouts along Kelvin taps, thermal and stitching vias, land, measure the copper kept++Why the AI came back here: Remeasure native filled copper after the final via-spacing repair.++**Clip: pours, visit 4 (rework), still recording (started 2026-09-14T04:24:52Z); it appears here when the step ends.**++**Screenshot: the board when pours, visit 4 (rework) began.**++![the board when pours, visit 4 (rework) began](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-pours-4-start.png)+ ## Given back -5 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:+6 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:  - issue https://wiki.adom.inc/adom/adom-aiflow/issues/1 - issue https://wiki.adom.inc/adom/adom-aiflow/issues/2 - issue https://wiki.adom.inc/adom/adom-aiflow/issues/3 - issue https://wiki.adom.inc/adom/adom-aiflow/issues/4 - issue https://wiki.adom.inc/adom/adom-aiflow/issues/5+- issue https://wiki.adom.inc/adom/adom-aiflow/issues/6  Adom processes PRs within minutes during business hours: a non-stop PR intake runs all day.