AI Flow

@@ -1,6 +1,6 @@ # AI Flow run: Codex (Astra) on board-0 -**Running**: step `capture`, 60.2 min since the prompt. This page updates at every step change.+**Running**: step `routing`, 64.6 min since the prompt. This page updates at every step change.  Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). @@ -10,13 +10,13 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from |---|---|---|---|---|---|---|---| | intake | 3.1 | 3.1 | 0.0 | 2 | 0 | 0 | 2.0 min | | placement | 6.4 | 5.6 | 0.8 | 16 | 3 | 2 | 2.0 min |-| routing | 33.2 | 13.4 | 19.8 | 26 | 4 | 3 | 7.7 min |+| routing | 33.4 | 13.4 | 19.9 | 27 | 5 | 4 | 7.7 min | | pours | 13.8 | 5.5 | 8.2 | 28 | 3 | 2 | 1.0 min | | current | 1.4 | 0.7 | 0.7 | 4 | 2 | 1 | 0.4 min | | thermal | 1.4 | 1.1 | 0.3 | 4 | 2 | 1 | 0.7 min |-| capture | 0.9 | 0.0 | 0.9 | 2 | 1 | 0 | 0.0 min |+| capture | 5.2 | 4.2 | 1.0 | 2 | 1 | 0 | 4.2 min | | other | 0.0 | 0.0 | 0.0 | 1 | 0 | 0 | 0.0 min |-| **total** | **60.2** | **29.5** | **30.7** | | | | |+| **total** | **64.6** | **33.7** | **30.9** | | | | |  ## Returns to earlier steps @@ -29,6 +29,7 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from - 2026-09-14T04:08:51Z back to **pours** (visit 3): Thermal analysis estimates Q4 at 63 C rise against the unchanged 60 C budget; expand its connected rear phase-B copper and remeasure. - 2026-09-14T04:12:47Z back to **current** (visit 2): Recheck all loaded nets after the connected phase-B thermal extension and native refill. - 2026-09-14T04:13:20Z back to **thermal** (visit 2): All seven current checks pass after the phase-B extension; reevaluate Q4 against the same 60 C rise budget.+- 2026-09-14T04:18:28Z back to **routing** (visit 5): Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.  ## Decisions along the way @@ -58,6 +59,7 @@ Prompt at 2026-09-14T03:14:00.700Z (UTC). Flow: board. Every number here is from - 2026-09-14T04:12:55Z clip-start:current-2 - 2026-09-14T04:13:23Z clip-start:thermal-2 - 2026-09-14T04:14:12Z clip-start:capture-1+- 2026-09-14T04:18:37Z clip-start:routing-5  ## Where the board stands @@ -323,12 +325,30 @@ What this step does: window recording with markers, so every engine's video line  Why the AI came back here: Both analyses pass. Save the native board, pull it back, verify the 27 fixed interfaces and run DRC on the saved result before finish. -**Clip: capture, still recording (started 2026-09-14T04:14:12Z); it appears here when the step ends.**+**Clip: capture, the PCB editor from 2026-09-14T04:14:12Z to 2026-09-14T04:18:32Z, 4.3 min of real time shown at 10x (26 s).**++<video width="100%" controls><source src="/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/capture-1.mp4" type="video/mp4"></video>  **Screenshot: the board when capture began.**  ![the board when capture began](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-capture-1-start.png) +**Screenshot: the board when capture ended.**++![the board when capture ended](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-capture-1-end.png)++### routing, visit 5 (rework)++What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai++Why the AI came back here: Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.++**Clip: routing, visit 5 (rework), still recording (started 2026-09-14T04:18:37Z); it appears here when the step ends.**++**Screenshot: the board when routing, visit 5 (rework) began.**++![the board when routing, visit 5 (rework) began](/blob/app/adom-aiflow/docs/runs/source-unplaced-codex-astra-20260914-0314/shot-routing-5-start.png)+ ## Given back  5 issue(s) or PR(s) filed by this run's AI to make the tool better for every Adom user:

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯