component

Adafruit 1317 150 mAh protected LiPo

Public Made by Adom

by adom

Compact 3.7 V protected pouch battery with JST-PH leads and source-linked mechanical CAD.

batterylipoadafruit150mah
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Name Last commit message Last updated
docs Add source-linked 150 mAh battery model, polarity, datasheet and dated sourcing · John Lauer 1d ago
screenshots Set hero asset · John Lauer 1d ago
adom-1317.glb Add source-linked 150 mAh battery model, polarity, datasheet and dated sourcing · John Lauer 1d ago
adom-1317.step Refresh reproducible mechanical export and source hashes · John Lauer 1d ago
battery-hero.png Add 16:10 battery geometry hero · John Lauer 1d ago
battery-rev2.png Add source-linked 150 mAh battery model, polarity, datasheet and dated sourcing · John Lauer 1d ago
LICENSE Add source-linked 150 mAh battery model, polarity, datasheet and dated sourcing · John Lauer 1d ago
page.json Set hero: screenshots/hero.png · John Lauer 1d ago
provenance.json Synchronize final model provenance hashes · John Lauer 1d ago
README.md Add source-linked 150 mAh battery model, polarity, datasheet and dated sourcing · John Lauer 1d ago

Adafruit 1317, 150 mAh protected LiPo

Adafruit product 1317 is a single-cell 3.7 V, 150 mAh lithium-ion polymer pouch battery, with protection circuitry and a genuine two-circuit JST-PH plug on red and black leads. Use a suitable 4.2 V CC/CV Li-ion charger; Adafruit specifies a maximum charge current of 150 mA. The PKCell drawing gives 30 mA as its standard charge rate and 150 mA as quick charge. Charge only within the manufacturer's temperature limits.

The Adafruit product listing gives a 19.75 x 26.02 x 3.8 mm pack, 4.65 g mass and 127.5 mm leads. The January 2024 revision tapes the cable down on top of the pack. The linked PKCell LP402025 drawing, QA.S.0228 edition A, dated 2014-07-28, is retained as docs/Datasheet.pdf. Its older drawing and lead presentation do not define the newer taped cable pose.

Polarity: circuit 1 is positive, red; circuit 2 is negative, black. This is the Adafruit wiring order, also specified in the consuming board interface. The drawing calls out a reversed PH-2P plug. Connector photographs establish the wire colors and housing orientation; the electrical numbering follows the mating JST connector convention. Verify the received pack with a meter, since otherwise similar batteries can reverse the order.

CAD

adom-1317.step and adom-1317.glb are an Adom-authored mechanical reconstruction, not manufacturer CAD. The nominal pack envelope, top cable tape, two full-length insulated leads and JST plug are separate named solids. The PCM is included within the pack envelope, rather than claimed as an independently measured circuit. Lead insulation OD 0.9 mm and plug fine geometry are provisional photo estimates. The curved leads show one installation pose, not a factory-supplied shape. The solid pouch envelope includes folded seals and protection circuitry within the stated overall dimensions.

No battery PCB footprint is claimed: the flying plug mates to a separate board header. CAD is for packaging reference; check the received battery dimensions, connector, cable diameter and swelling allowance before manufacture. Original CAD and prose are MIT. The manufacturer datasheet retains its original rights.

Buy

Mouser 485-1317: USD 5.95, 111 in stock on 2026-11-08, from the project sourcing snapshot. This is a dated snapshot, not live inventory. Also available directly from Adafruit.