ADM8614Y263ACBZ-R7

{
  "slug": "adm8614y263acbz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Supervisor And Reset ICs, WLCSP-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "adm8614y263acbz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm8614y263acbz-r7.kicad_sym",
    "adm8614y263acbz-r7.kicad_mod",
    "adm8614y263acbz-r7.glb",
    "adm8614y263acbz-r7.step",
    "adm8614y263acbz-r7.lbr",
    "docs/hero.png",
    "docs/adm8614y263acbz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm8614y263acbz-r7-hero.glb",
    "adm8614y263acbz-r7-hero.overlay.json",
    "adm8614y263acbz-r7-etched.glb"
  ],
  "component": {
    "mpn": "ADM8614Y263ACBZ-R7",
    "manufacturer": "Analog Devices",
    "package": "WLCSP-6(1x1.5)",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590455774024798208",
    "parts": {
      "symbol": "adm8614y263acbz-r7.kicad_sym",
      "footprint": "adm8614y263acbz-r7.kicad_mod",
      "model_3d": "adm8614y263acbz-r7-hero.glb",
      "model_3d_plain": "adm8614y263acbz-r7-etched.glb",
      "model_3d_step": "adm8614y263acbz-r7-etched.step",
      "model_3d_step_plain": "adm8614y263acbz-r7.step",
      "lbr": "adm8614y263acbz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C5252609",
      "digikey": "505-ADM8614Y263ACBZ-R7TR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T19:09:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM8614Y263ACBZ-R7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "A1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input and the voltage monitored by the ADM8614, operating from 0.9 V to 5.5 V, with a 0.1 µF decoupling capacitor recommended as close to the device as possible between VCC and GND."
      },
      {
        "number": "A2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "B1",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog timer input that must toggle to prevent a watchdog reset, with input high threshold 0.9 V minimum and low threshold 0.4 V maximum, and pulses as short as 85 ns detected."
      },
      {
        "number": "B2",
        "name": "WD_DIS",
        "type": "input",
        "description": "Watchdog function disable input that disables the watchdog when tied high and should be connected to ground if unused, with VIH of 0.9 V minimum and VIL of 0.4 V maximum."
      },
      {
        "number": "C1",
        "name": "WDT_SEL",
        "type": "input",
        "description": "Watchdog timeout selection input that extends the watchdog timeout to 100 sec when pulled high and returns it to the base value when pulled low, and toggling it resets the watchdog timer."
      },
      {
        "number": "C2",
        "name": "RESET",
        "type": "output",
        "description": "Active low, open-drain RESET output that asserts within 23 µs to 26 µs (typical) when the monitored voltage falls below threshold and is guaranteed valid once VCC exceeds 0.9 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint says WLCSP-6 (1x1.5), but the datasheet gives the package as 6-ball WLCSP 1.46 mm × 0.9; Figure 6 text extraction for the ADM8614 lists 'MR' in the figure label block, but Table 7 (pin C1 =; The datasheet specifies the RESET output as open-drain, which is mapped here to KiCad 'output' type "
        ],
        "pages_sent": 17,
        "cost_usd": 0.0879,
        "at": "2026-10-18T19:08:52"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590455774024798208",
        "pages": 17,
        "sha256": "608bec547fbee701",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm8614y263acbz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.36,
          0.96,
          0.591
        ],
        "zmin_mm": -0.034,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "451493bc5c08d42e9fcdd0a50f1c9112722a54a407dd8dc0005e6b7588d2430b",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm8614y263acbz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.36,
          0.96,
          0.591
        ],
        "zmin_mm": -0.034,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "01a1588cc5a87dd4d5e93d515659dd4f0880fe8ec64b4bde1301ec75d2e0e227",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}