ADM811LARTZ-REEL7

{
  "slug": "adm811lartz-reel7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Supervisor And Reset ICs, SOT-143. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "adm811lartz-reel7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm811lartz-reel7.kicad_sym",
    "adm811lartz-reel7.kicad_mod",
    "adm811lartz-reel7.glb",
    "adm811lartz-reel7.step",
    "adm811lartz-reel7.lbr",
    "docs/hero.png",
    "docs/adm811lartz-reel7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm811lartz-reel7-hero.glb",
    "adm811lartz-reel7-hero.overlay.json",
    "adm811lartz-reel7-etched.glb"
  ],
  "component": {
    "mpn": "ADM811LARTZ-REEL7",
    "manufacturer": "Analog Devices",
    "package": "SOT-143",
    "pin_count": 4,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589805484128833536",
    "parts": {
      "symbol": "adm811lartz-reel7.kicad_sym",
      "footprint": "adm811lartz-reel7.kicad_mod",
      "model_3d": "adm811lartz-reel7-hero.glb",
      "model_3d_plain": "adm811lartz-reel7-etched.glb",
      "model_3d_step": "adm811lartz-reel7-etched.step",
      "model_3d_step_plain": "adm811lartz-reel7.step",
      "lbr": "adm811lartz-reel7.lbr"
    },
    "distributor_links": {
      "lcsc": "C658515",
      "digikey": "505-ADM811LARTZ-REEL7TR-ND",
      "mouser": "584-ADM811LARTZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T02:04:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM811LARTZ-REEL7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM811LARTZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all signals, 0 V."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Active-low logic output that stays low while VCC is below the reset threshold or MR is low, and for at least 140 ms after VCC rises above the reset threshold (at least 300 ms for the ADM811-3T); it remains valid (low) down to VCC of 1 V."
      },
      {
        "number": "3",
        "name": "MR",
        "type": "input",
        "description": "Active-low manual reset input that ignores input pulses of 100 ns or less (typical) and is guaranteed to accept pulses greater than 10 µs; leave floating when not used."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Monitored supply voltage of 2.5 V, 3 V, 3.3 V, or 5 V; a 0.1 µF decoupling capacitor between VCC and GND is recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 2 is printed as RESET/RESET on the figure and as RESET (ADM811) / RESET (ADM812) in the pin tabl; The datasheet gives one SOT-143 (RA-4) pin configuration, which applies to this variant. Pin numbers"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0569,
        "at": "2026-10-19T02:01:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589805484128833536",
        "pages": 12,
        "sha256": "b82418ebee2a8f6b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 4,
        "described": 4,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm811lartz-reel7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b35b433c0dc71ac416a9c731e744d2e0610f82ebe97275830f0e17cdcbe44512",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm811lartz-reel7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.3,
          2.9,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9f12be8e4704fbc974f4e2dfe3cb861fdeea06abc646f025f686de266a6746a9",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}