component
ADM809-5SAKSZ-RL7
Public Made by Adomby adom
Analog Devices Monitors & Reset Circuits, SC-70-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ADM809-5SAKSZ-RL7
Analog Devices · Monitors & Reset Circuits · SC-70-3
ADM809-5SAKSZ-RL7 from Analog Devices, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for all signals (0 V). |
| 2 | RESET | output | Active low logic output that remains low while VCC is below the reset threshold and for 55 ms (typical) after VCC rises above the reset threshold. |
| 3 | VCC | power_in | Supply voltage being monitored, with the RESET output remaining operational with VCC as low as 1 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | 3.3 | 5.5 | V | TA = 0°C to 150°C with 100 kΩ pull-down on output (Figure 10) | 3 |
| VCC Operating Voltage Range | VCC | 1.2 | 3.3 | 5.5 | V | TA = −40°C to +150°C with 22 kΩ external pull-up on output (Figure 13) | 3 |
| Supply Current, ADM809-5S | IQ | 17 | 50 | μA | VCC < 3.6 V, ADM809-5S, TA = −40°C to +150°C | 3 | |
| RESET Voltage Threshold, ADM809-5S | VTH | 2.85 | 3 | V | ADM809-5S, TA = −40°C to +85°C | 3 | |
| RESET Voltage Threshold, ADM809-5S | VTH | 2.78 | 3.08 | V | ADM809-5S, TA = 85°C to 150°C | 3 | |
| RESET Threshold Temperature Coefficient | 30 | ppm/°C | 3 | ||||
| VCC to RESET Delay | 20 | μs | VCC = VTH to (VTH − 100 mV) | 3 | |||
| RESET Active Timeout Period | 30 | 55 | 80 | ms | TA = −40°C to +150°C | 3 | |
| RESET Output Voltage Low, ADM809-5S | VOL | 0.3 | V | VCC = VTH minimum, ISINK = 1.2 mA, ADM809-5S | 3 | ||
| RESET Output Voltage Low | VOL | 0.3 | V | VCC > 1.0 V, ISINK = 50 μA, TA = 0°C to 150°C | 3 | ||
| RESET Output Voltage High | VOH | 0.8 | VCC | VCC > VTH maximum, ISOURCE = 500 μA | 3 | ||
| RESET Output Voltage High (VCC − 1.5 V) | VOH | 1.5 | V below VCC | VCC > VTH maximum, ISOURCE = 800 μA | 3 | ||
| Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| VCC Absolute Maximum | VCC | -0.3 | 6 | V | TA = 25°C | 4 | |
| RESET Absolute Maximum | RESET | -0.3 | V | max VCC + 0.5 V, TA = 25°C | 4 | ||
| VCC Input Current | IIN | 20 | mA | TA = 25°C | 4 | ||
| RESET Output Current | IO | 20 | mA | TA = 25°C | 4 | ||
| Rate of Rise, VCC | 100 | V/μs | TA = 25°C | 4 | |||
| Thermal Impedance θJA, SC70 | θJA | 146 | °C/W | SC70 package | 4 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
ADM809-5SAKSZ-RL7 - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SC-70-3 (KiCad packages3D, STEP)
- 3D model files:
adm809-5saksz-rl7-etched.step/adm809-5saksz-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm809-5saksz-rl7.step/adm809-5saksz-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
fa43263aa26ebe81, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADM809-5SAKSZ-RL7
**Analog Devices** · Monitors & Reset Circuits · SC-70-3
ADM809-5SAKSZ-RL7 from Analog Devices, in a SC-70-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for all signals (0 V). |
| 2 | RESET | output | Active low logic output that remains low while VCC is below the reset threshold and for 55 ms (typical) after VCC rises above the reset threshold. |
| 3 | VCC | power_in | Supply voltage being monitored, with the RESET output remaining operational with VCC as low as 1 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | 3.3 | 5.5 | V | TA = 0°C to 150°C with 100 kΩ pull-down on output (Figure 10) | 3 |
| VCC Operating Voltage Range | VCC | 1.2 | 3.3 | 5.5 | V | TA = −40°C to +150°C with 22 kΩ external pull-up on output (Figure 13) | 3 |
| Supply Current, ADM809-5S | IQ | | 17 | 50 | μA | VCC < 3.6 V, ADM809-5S, TA = −40°C to +150°C | 3 |
| RESET Voltage Threshold, ADM809-5S | VTH | 2.85 | | 3 | V | ADM809-5S, TA = −40°C to +85°C | 3 |
| RESET Voltage Threshold, ADM809-5S | VTH | 2.78 | | 3.08 | V | ADM809-5S, TA = 85°C to 150°C | 3 |
| RESET Threshold Temperature Coefficient | | | 30 | | ppm/°C | | 3 |
| VCC to RESET Delay | | | 20 | | μs | VCC = VTH to (VTH − 100 mV) | 3 |
| RESET Active Timeout Period | | 30 | 55 | 80 | ms | TA = −40°C to +150°C | 3 |
| RESET Output Voltage Low, ADM809-5S | VOL | | | 0.3 | V | VCC = VTH minimum, ISINK = 1.2 mA, ADM809-5S | 3 |
| RESET Output Voltage Low | VOL | | | 0.3 | V | VCC > 1.0 V, ISINK = 50 μA, TA = 0°C to 150°C | 3 |
| RESET Output Voltage High | VOH | 0.8 | | | VCC | VCC > VTH maximum, ISOURCE = 500 μA | 3 |
| RESET Output Voltage High (VCC − 1.5 V) | VOH | 1.5 | | | V below VCC | VCC > VTH maximum, ISOURCE = 800 μA | 3 |
| Junction Temperature | TJ | -40 | | 150 | °C | | 3 |
| VCC Absolute Maximum | VCC | -0.3 | | 6 | V | TA = 25°C | 4 |
| RESET Absolute Maximum | RESET | -0.3 | | | V | max VCC + 0.5 V, TA = 25°C | 4 |
| VCC Input Current | IIN | | | 20 | mA | TA = 25°C | 4 |
| RESET Output Current | IO | | | 20 | mA | TA = 25°C | 4 |
| Rate of Rise, VCC | | | | 100 | V/μs | TA = 25°C | 4 |
| Thermal Impedance θJA, SC70 | θJA | | 146 | | °C/W | SC70 package | 4 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `ADM809-5SAKSZ-RL7`
- Footprint: `Package_TO_SOT_SMD:SOT-323_SC-70`
- 3D model: SC-70-3 (KiCad packages3D, STEP)
- 3D model files: `adm809-5saksz-rl7-etched.step` / `adm809-5saksz-rl7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm809-5saksz-rl7.step` / `adm809-5saksz-rl7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM809-5S_-5L.pdf) (8 pp, sha256 `fa43263aa26ebe81`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adm809-5saksz-rl7-datasheet.pdf)