ADM708SARZ-REEL

{
  "slug": "adm708sarz-reel",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "adm708sarz-reel",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm708sarz-reel.kicad_sym",
    "adm708sarz-reel.kicad_mod",
    "adm708sarz-reel.glb",
    "adm708sarz-reel.step",
    "adm708sarz-reel.lbr",
    "docs/hero.png",
    "docs/adm708sarz-reel-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm708sarz-reel-hero.glb",
    "adm708sarz-reel-hero.overlay.json",
    "adm708sarz-reel-etched.glb"
  ],
  "component": {
    "mpn": "ADM708SARZ-REEL",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914768883429376",
    "parts": {
      "symbol": "adm708sarz-reel.kicad_sym",
      "footprint": "adm708sarz-reel.kicad_mod",
      "model_3d": "adm708sarz-reel-hero.glb",
      "model_3d_plain": "adm708sarz-reel-etched.glb",
      "model_3d_step": "adm708sarz-reel-etched.step",
      "model_3d_step_plain": "adm708sarz-reel.step",
      "lbr": "adm708sarz-reel.lbr"
    },
    "distributor_links": {
      "lcsc": "C658425",
      "digikey": "ADM708SARZ-REELTR-ND",
      "mouser": "584-ADM708SARZ-R"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T06:00:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADM708SARZ-REELTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM708SARZ-R",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "MR",
        "type": "input",
        "description": "Manual reset input; taking it below 0.6 V generates a reset, it is internally debounced, and an internal 70 µA pull-up holds it high when floating."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input with an operating range of 1.0 V to 5.5 V (Table 1, p.3); place a 0.1 µF decoupling capacitor between VCC and GND."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all signals (0 V)."
      },
      {
        "number": "4",
        "name": "PFI",
        "type": "input",
        "description": "Noninverting input to the power-fail comparator, which compares against a 1.25 V threshold; if unused it must connect to GND."
      },
      {
        "number": "5",
        "name": "PFO",
        "type": "output",
        "description": "Power-fail comparator output that goes low when PFI is less than 1.25 V."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "7",
        "name": "~{RESET}",
        "type": "output",
        "description": "Active-low reset logic output that goes low for 200 ms when triggered by VCC below the reset threshold or a low on MR, and stays low for 200 ms after VCC recovers or MR returns high."
      },
      {
        "number": "8",
        "name": "RESET",
        "type": "output",
        "description": "Active-high reset logic output, the inverse of RESET, for systems that use active-high reset logic."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet text extraction dropped the overbars, so pin 7 and pin 8 names are inferred from their; The pinout comes from the ADM708R/S/T configuration (Figure 5, Table 4). The ADM706 variants use dif"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0798,
        "at": "2026-10-19T06:00:15"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914768883429376",
        "pages": 16,
        "sha256": "895503bcb0ce1e41",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm708sarz-reel.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm708sarz-reel-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dd9b16cc33c9bb3de775cf8b1cb6c899f8ba4057a725f52bb4c7e0b9451d6a1",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}