component
ADM707ANZ
Public Made by Adomby adom
Analog Devices Monitors & Reset Circuits, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADM707ANZ
Analog Devices · Monitors & Reset Circuits · PDIP-8
ADM707ANZ from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Manual reset input; when taken below 0.8 V a reset is generated, it is internally debounced, and an internal 250 μA pull-up holds it high when floating. |
| 2 | VCC | power_in | 5 V power supply input; place a 0.1 μF decoupling capacitor between VCC and GND. |
| 3 | GND | power_in | 0 V ground reference for all signals. |
| 4 | PFI | input | Power fail input to the noninverting input of the power fail comparator; PFO goes low when PFI is less than 1.25 V, and PFI must be connected to GND if unused. |
| 5 | PFO | output | Power fail output from the power fail comparator; it goes low when PFI is less than 1.25 V. |
| 6 | NC | unconnected | No connect. |
| 7 | RESET | output | Active-low logic output that goes low for 200 ms when VCC is below the reset threshold (4.65 V for ADM707) or MR is driven low. |
| 8 | RESET | output | Active-high logic output, the inverse of RESET, for systems that use active-high reset logic. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | PDIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADM707ANZ - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
adm707anz-etched.step/adm707anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm707anz.step/adm707anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
61bcbb4abfdc3081, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).