# ADM6710EARJZ-REEL7

**Analog Devices** · Monitors & Reset Circuits · SOT-23-6

ADM6710EARJZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Input Voltage 1 is a monitored supply input; RESET stays valid while IN1 or IN2 exceeds 1 V. |
| 2 | IN2 | power_in | Input Voltage 2 is the power supply input for the ADM6710 and is guaranteed to keep RESET in the correct state down to 1 V. |
| 3 | IN3 | input | Input Voltage 3 is a monitored supply input; unused inputs must not float or be grounded and must be tied above their threshold. |
| 4 | IN4 | input | Input Voltage 4 is a monitored supply input; unused inputs must not float or be grounded and must be tied above their threshold. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | RESET | output | Active low open-drain RESET output with a weak internal pull-up of typically 10 µA to IN2 that stays low for 200 ms typical after all inputs rise above threshold. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |

## CAD (KiCad official)

- Symbol: `ADM6710EARJZ-REEL7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `adm6710earjz-reel7-etched.step` / `adm6710earjz-reel7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm6710earjz-reel7.step` / `adm6710earjz-reel7.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM6710.pdf) (12 pp, sha256 `17db66dd289904e0`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/adm6710earjz-reel7-datasheet.pdf)