ADM660ARZ-REEL

{
  "slug": "adm660arz-reel",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "adm660arz-reel",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm660arz-reel.kicad_sym",
    "adm660arz-reel.kicad_mod",
    "adm660arz-reel.glb",
    "adm660arz-reel.step",
    "adm660arz-reel.lbr",
    "docs/hero.png",
    "docs/adm660arz-reel-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm660arz-reel-hero.glb",
    "adm660arz-reel-hero.overlay.json",
    "adm660arz-reel-etched.glb"
  ],
  "component": {
    "mpn": "ADM660ARZ-REEL",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM660_8660.pdf",
    "parts": {
      "symbol": "adm660arz-reel.kicad_sym",
      "footprint": "adm660arz-reel.kicad_mod",
      "model_3d": "adm660arz-reel-hero.glb",
      "model_3d_plain": "adm660arz-reel-etched.glb",
      "model_3d_step": "adm660arz-reel-etched.step",
      "model_3d_step_plain": "adm660arz-reel.step",
      "lbr": "adm660arz-reel.lbr"
    },
    "distributor_links": {
      "lcsc": "C579212",
      "digikey": "ADM660ARZ-REELTR-ND",
      "mouser": "584-ADM660ARZ-R"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T12:02:51Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADM660ARZ-REELTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM660ARZ-R",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FC",
        "type": "input",
        "description": "Frequency control input: open gives 25 kHz charge-pump frequency (10 µF capacitors), connected to V+ gives 120 kHz (2.2 µF capacitors)."
      },
      {
        "number": "2",
        "name": "CAP+",
        "type": "passive",
        "description": "Positive charge-pump capacitor terminal for the external capacitor C1."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground in inverter configuration (positive input supply in doubler configuration)."
      },
      {
        "number": "4",
        "name": "CAP-",
        "type": "passive",
        "description": "Negative charge-pump capacitor terminal for the external capacitor C1."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Negative voltage output in inverter configuration (ground in doubler configuration)."
      },
      {
        "number": "6",
        "name": "LV",
        "type": "input",
        "description": "Low-voltage operation input: connect to GND when input voltage is below 3.5 V, above 3.5 V it may be connected to GND or left open; connect to OUT in doubler mode."
      },
      {
        "number": "7",
        "name": "OSC",
        "type": "input",
        "description": "Oscillator control input with internal 15 pF capacitor; an external capacitor slows the oscillator or an external clock can overdrive it (charge-pump frequency is half the oscillator frequency); leave unconnected in doubler mode."
      },
      {
        "number": "8",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply input (+1.5 V to +7 V) in inverter configuration; doubled positive output in doubler configuration."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-connection diagram text is extracted out of order, so pin numbers are not printed explicitly; The datasheet's function table swaps the descriptions for some pins in the doubler configuration (GN"
        ],
        "pages_sent": 11,
        "cost_usd": 0.1385,
        "at": "2026-10-30T12:02:38"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM660_8660.pdf",
        "pages": 11,
        "sha256": "43715cb8001e9d83",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm660arz-reel.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm660arz-reel-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "727f4b1c436df9b7e64da46f0a45d95f3989cce686cd62b452b6a205c4519d65",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "R-8",
      "source_page": 10,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5.0
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4.0
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.55,
        "range_mm": [
          1.35,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "adm660arz-reel.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}