Generated by kicad-footprint-generator · KiCad file format 20260206
ADM6320CY29ARJZ-R7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM6320CY29ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low open-drain reset output (ADM6320), asserted whenever VCC is below the reset threshold VTH; requires an external pull-up resistor to a rail no higher than 6 V. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Active-low manual reset input that generates a reset when forced low for at least 1 µs, with a 52 kΩ internal pull-up. |
| 4 | WDI | input | Watchdog input that generates a reset if the logic level stays low or high for the watchdog timeout; leave floating to disable the watchdog timer. |
| 5 | VCC | power_in | Power supply voltage being monitored, operating range 1 V to 5.5 V (absolute maximum -0.3 V to +6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset threshold voltage (25°C) | VTH | 2.886 | 2.93 | 2.974 | V | TA = 25°C, threshold number 29 | 11 |
| Reset threshold voltage (-40°C to +85°C) | VTH | 2.857 | 3 | V | TA = -40°C to +85°C, threshold number 29 | 11 | |
| VCC Operating Voltage Range | VCC | 1 | 5.5 | V | 3 | ||
| Supply Current | ICC | 10 | 20 | µA | VCC = 5.5 V | 3 | |
| Supply Current | ICC | 5 | 12 | µA | VCC = 3.6 V | 3 | |
| Reset Timeout Period (ADM63xxC) | tRP | 140 | 200 | 280 | ms | 3 | |
| Watchdog Timeout Period (ADM63xxxY) | tWD | 1.12 | 1.6 | 2.4 | sec | 3 | |
| Open-Drain Reset Output Leakage Current | 1 | µA | 3 | ||||
| RESET Output Voltage low | VOL | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 | ||
| RESET Output Voltage low | VOL | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | ||
| WDI Pulse Width | 50 | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 | |||
| WDI Input Current (high) | 120 | 160 | µA | VWDI = VCC, time average | 3 | ||
| WDI Input Current (low) | -20 | -15 | µA | VWDI = 0, time average | 3 | ||
| MR Input Pulse Width | 1 | µs | 4 | ||||
| MR Pull-Up Resistance | 35 | 52 | 75 | kΩ | 4 | ||
| Reset Threshold Temperature Coefficient | 40 | ppm/°C | 3 | ||||
| Reset Threshold Hysteresis | 3 | mV | 3 | ||||
| VCC to Reset Delay | tRD | 40 | µs | VCC falling at 1 mV/µs | 3 | ||
| MR Glitch Rejection | 100 | ns | 4 | ||||
| MR to Reset Delay | 230 | ns | VCC = 5 V | 4 | |||
| VCC | VCC | -0.3 | 6 | V | TA = 25°C | 5 | |
| RESET (open-drain) | RESET | -0.3 | 6 | V | TA = 25°C | 5 | |
| All Other Pins | -0.3 | V | -0.3 V to (VCC + 0.3 V); max is VCC + 0.3 V | 5 | |||
| Output Current (RESET, RESET) | 20 | mA | TA = 25°C | 5 | |||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Storage Temperature Range | -65 | 125 | °C | 5 | |||
| θJA Thermal Impedance, SOT-23 | θJA | 270 | °C/W | 5 | |||
| Lead Temperature, Soldering (10 sec) | 300 | °C | 10 sec | 5 | |||
| Lead Temperature, Vapor Phase (60 sec) | 215 | °C | 60 sec | 5 | |||
| Lead Temperature, Infrared (15 sec) | 220 | °C | 15 sec | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM6320CY29ARJZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm6320cy29arjz-r7-etched.step/adm6320cy29arjz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm6320cy29arjz-r7.step/adm6320cy29arjz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).