main
History Download
Ray Publish 0.1.0 b7e76b5

ADM3311EARSZ-REEL

Analog Devices · RS232 ICs · SSOP-28-208mil

ADM3311EARSZ-REEL from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_out Internally generated positive supply of 7.25 V nominal, with capacitor C4 connected between VCC and V+.
2 C2+ passive Positive terminal of external charge pump capacitor C2; 0.1 µF recommended, with larger values up to 1 µF allowed.
3 VCC power_in Power supply input, 2.7 V to 3.6 V.
4 C2- passive Negative terminal of external charge pump capacitor C2; 0.1 µF recommended, with larger values up to 1 µF allowed.
5 EN input Receiver enable; a high level three-states all receiver outputs.
6 C1+ passive Positive terminal of external charge pump capacitor C1; 0.1 µF recommended, with larger values up to 1 µF allowed.
7 T1IN input Transmitter 1 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
8 T2IN input Transmitter 2 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
9 T3IN input Transmitter 3 driver input accepting TTL/CMOS levels, with an internal 400 kΩ pull-up resistor to VCC.
10 R1OUT output Receiver 1 output at TTL/CMOS levels.
11 R2OUT output Receiver 2 output at TTL/CMOS levels.
12 R3OUT output Receiver 3 output at TTL/CMOS levels.
13 R4OUT output Receiver 4 output at TTL/CMOS levels; disabled in shutdown on the ADM3311E.
14 R5OUT output Receiver 5 output at TTL/CMOS levels; this is the receiver that remains active in shutdown on the ADM3311E.
15 R5IN input Receiver 5 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND.
16 R4IN input Receiver 4 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND.
17 R3IN input Receiver 3 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND.
18 R2IN input Receiver 2 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND.
19 R1IN input Receiver 1 RS-232 input, protected to ±30 V, with an internal 5 kΩ pull-down resistor to GND.
20 T3OUT output Transmitter 3 RS-232 output, typically ±6.4 V for the ADM3311E.
21 T2OUT output Transmitter 2 RS-232 output, typically ±6.4 V for the ADM3311E.
22 T1OUT output Transmitter 1 RS-232 output, typically ±6.4 V for the ADM3311E.
23 SD input Shutdown control; a high level disables the charge pump and reduces quiescent current to less than 1 µA, disabling all transmitters and most receivers.
24 C1- passive Negative terminal of external charge pump capacitor C1; 0.1 µF recommended, with larger values up to 1 µF allowed.
25 V- power_out Internally generated negative supply of −7.25 V nominal, with capacitor C5 connected between GND and V-.
26 C3- passive Negative terminal of external charge pump capacitor C3; 0.1 µF recommended, with larger values up to 1 µF allowed.
27 GND power_in Ground pin, must be connected to 0 V.
28 C3+ passive Positive terminal of external charge pump capacitor C3; 0.1 µF recommended, with larger values up to 1 µF allowed.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-28-208mil
Category Interface ICs
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VCC 2.7 3.3 3.6 V 4
VCC Power Supply Current ICC 0.45 1 mA No load; VCC = 3.0 V to 3.6 V; TA = 0°C to 85°C 4
VCC Power Supply Current ICC 0.45 4.5 mA No load; VCC = 2.7 V to 3.6 V; TA = − 40°C to +85°C 4
Shutdown Supply Current ICC 0.02 1 µA 4
Input Pull-Up Current IIH 10 25 µA TIN = GND 4
Input Leakage Current, SD, EN IIL -1 0.02 1 µA 4
Input Logic Threshold Low VINL 0.8 V TIN, EN, SHDN 4
Input Logic Threshold Low VINL 0.4 V TIN, EN, SHDN; VCC = 2.7 V 4
Input Logic Threshold High VINH 2 V TIN, EN, SHDN 4
CMOS Output Voltage Low VOL 0.4 V IOUT = 1.6 mA 4
CMOS Output Leakage Current IOZ -5 0.05 5 µA EN = VCC, 0 V < ROUT < VCC; ADM3310E, ADM3311E 4
EIA-232 Input Voltage Range VIN -25 25 V 4
EIA-232 Input Threshold Low VIL 0.4 1.3 V 4
EIA-232 Input Threshold High VIH 2 2.4 V 4
EIA-232 Input Resistance RIN 3 5 7 kΩ ADM3307E, ADM3310E, ADM3311E, ADM3312E 4
Output Voltage Swing VO 5 6.4 V VCC = 3.0 V; all transmitter outputs loaded with 3 kΩ to ground; ADM3307E, ADM3311E, ADM3312E 4
Output Voltage Swing VO 5.5 V VCC = 2.7 V; all transmitter outputs loaded with 3 kΩ to ground; ADM3307E, ADM3311E, ADM3312E 4
Transmitter Output Resistance ROUT 300 Ω VCC = 0 V, VOUT = ±2 V 4
RS-232 Output Short-Circuit Current IOS 15 60 mA 4
Maximum Data Rate 250 460 kbps RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF, VCC = 3.0 V; ADM3310E, ADM3311E, ADM3312E, ADM3315E 5
Receiver Output Enable Time tER 100 ns 5
Receiver Output Disable Time tDR 300 ns 5
Transmitter Propagation Delay TPHL, TPLH 500 ns RL = 3 kΩ, CL = 1000 pF 5
Transition Region Slew Rate SR 3 18 V/µs RL = 3 kΩ, CL = 50 pF to 1000 pF 5
ESD Protection (I/O pins), Human Body Model -15 15 kV Human body model 5
ESD Protection (I/O pins), IEC 1000-4-2 air discharge -15 15 kV IEC 1000-4-2 air discharge 5
ESD Protection (I/O pins), IEC 1000-4-2 contact discharge -8 8 kV IEC 1000-4-2 contact discharge; includes CMOS I/O, SD, and EN for ADM3307E 5
VCC Supply Voltage VCC -0.3 4 V 6
V+ Output Voltage V+ 9 V (VCC − 0.3 V) to +9 V 6
V− Output Voltage V- -9 0.3 V +0.3 V to −9 V 6
TIN Input Voltage TIN -0.3 6 V 6
RIN Input Voltage RIN -30 30 V 6
TOUT Output Voltage TOUT -15 15 V 6
ROUT Output Voltage ROUT -0.3 V Upper limit (VCC + 0.3 V) 6
Operating Temperature Range (Industrial, A Version) TA -40 85 °C 6
Storage Temperature Range TSTG -65 150 °C 6
Lead Temperature (Soldering) 300 °C 10 sec 6
ESD Rating (IEC 1000-4-2 Air), RS-232 I/Os -15 15 kV RS-232 I/Os 6
ESD Rating (IEC 1000-4-2 Contact), RS-232 I/Os -8 8 kV RS-232 I/Os 6
Receiver Propagation Delay TPHL, TPLH 0.3 µs CL = 150 pF 4
EIA-232 Input Hysteresis 0.14 V 4
Charge Pump Output Voltage, V+ V+ 7.25 V No load; ADM3307E, ADM3311E, ADM3312E 4
Charge Pump Output Voltage, V− V- -7.25 V No load; ADM3307E, ADM3311E, ADM3312E 4
Thermal Impedance, θJA (SSOP, RS-28) θJA 76 °C/W SSOP (RS-28) 6

CAD (KiCad official)

  • Symbol: ADM3311EARSZ-REEL
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: adm3311earsz-etched.step / adm3311earsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm3311earsz.step / adm3311earsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 19555870393bbfda, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF