main
History Download
Ray Publish 0.1.0 c711eb9

ADM3310EACPZ

Analog Devices · RS232 ICs · LFCSP-32(5x5)

ADM3310EACPZ from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable; a high level three-states all the receiver outputs.
2 C1+ passive External capacitor C1 connects between C1+ and C1−; 0.1 µF recommended, up to 1 µF.
3 NC unconnected No connect; do not connect to this pin.
4 T1IN input Transmitter 1 input accepting TTL/CMOS levels, with internal 400 kΩ pull-up to VCC.
5 T2IN input Transmitter 2 input accepting TTL/CMOS levels, with internal 400 kΩ pull-up to VCC.
6 T3IN input Transmitter 3 input accepting TTL/CMOS levels, with internal 400 kΩ pull-up to VCC.
7 R1OUT output Receiver 1 output at TTL/CMOS levels; three-stated when EN is high.
8 R2OUT output Receiver 2 output at TTL/CMOS levels; three-stated when EN is high.
9 R3OUT output Receiver 3 output at TTL/CMOS levels; three-stated when EN is high.
10 R4OUT output Receiver 4 output at TTL/CMOS levels; remains active in shutdown on the ADM3310E.
11 R5OUT output Receiver 5 output at TTL/CMOS levels; remains active in shutdown on the ADM3310E.
12 NC unconnected No connect; do not connect to this pin.
13 NC unconnected No connect; do not connect to this pin.
14 R5IN input Receiver 5 RS-232 input with internal 5 kΩ pull-down to GND, protected to ±15 kV ESD.
15 R4IN input Receiver 4 RS-232 input with internal 5 kΩ pull-down to GND, protected to ±15 kV ESD.
16 R3IN input Receiver 3 RS-232 input with internal 5 kΩ pull-down to GND, protected to ±15 kV ESD.
17 R2IN input Receiver 2 RS-232 input with internal 5 kΩ pull-down to GND, protected to ±15 kV ESD.
18 R1IN input Receiver 1 RS-232 input with internal 5 kΩ pull-down to GND, protected to ±15 kV ESD.
19 T3OUT output Transmitter 3 RS-232 output, typically ±5.5 V on the ADM3310E.
20 T2OUT output Transmitter 2 RS-232 output, typically ±5.5 V on the ADM3310E.
21 T1OUT output Transmitter 1 RS-232 output, typically ±5.5 V on the ADM3310E.
22 NC unconnected No connect; do not connect to this pin.
23 SD input Shutdown control; a high level disables the charge pump and reduces quiescent current to less than 1 µA, leaving R4OUT and R5OUT active.
24 C1− passive External capacitor C1 connects between C1+ and C1−; 0.1 µF recommended, up to 1 µF.
25 V− power_out Internally generated negative supply, −6.5 V nominal for ADM3310E, with capacitor C5 connected between GND and V−.
26 C3− passive External capacitor C3 connects between C3+ and C3−; 0.1 µF recommended, up to 1 µF.
27 GND power_in Ground pin; must be connected to 0 V.
28 C3+ passive External capacitor C3 connects between C3+ and C3−; 0.1 µF recommended, up to 1 µF.
29 V+ power_out Internally generated positive supply, 6.5 V nominal for ADM3310E, with capacitor C4 connected between VCC and V+.
30 C2+ passive External capacitor C2 connects between C2+ and C2−; 0.1 µF recommended, up to 1 µF.
31 VCC power_in Power supply input, 2.7 V to 3.6 V.
32 C2− passive External capacitor C2 connects between C2+ and C2−; 0.1 µF recommended, up to 1 µF.
33 EP power_in Exposed pad, connected to ground.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-32(5x5)
Category Communication Interface Chip/UART/485/232
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Data Rate 250 460 kbps RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF, VCC = 3.0 V 5
Receiver Propagation Delay, TPHL, TPLH 0.3 µs CL = 150 pF 5
Receiver Output Enable Time tER 100 ns 5
Receiver Output Disable Time tDR 300 ns 5
Transmitter Propagation Delay, TPHL, TPLH 500 ns RL = 3 kΩ, CL = 1000 pF 5
Transition Region Slew Rate 3 18 V/µs RL = 3 kΩ, CL = 50 pF to 1000 pF; measured at +3 V to −3 V or −3 V to +3 V 5
ESD Protection (I/O pins) HBM -15 15 kV Human body model 5
ESD Protection (I/O pins) IEC 1000-4-2 air -15 15 kV IEC 1000-4-2 air discharge 5
ESD Protection (I/O pins) IEC 1000-4-2 contact -8 8 kV IEC 1000-4-2 contact discharge 5
Supply Voltage VCC 2.7 3.6 V 9
Supply Voltage (absolute maximum) VCC -0.3 4 V TA = 25°C 6
Positive charge pump voltage V+ 9 V Range (VCC − 0.3 V) to +9 V 6
Negative charge pump voltage V− -9 V Range +0.3 V to −9 V 6
Transmitter Input Voltage TIN -0.3 6 V 6
Receiver Input Voltage RIN -30 30 V 6
Transmitter Output Voltage TOUT -15 15 V 6
Receiver Output Voltage ROUT -0.3 V Range −0.3 V to (VCC + 0.3 V) 6
Operating Temperature Range (Industrial, A Version) -40 85 °C 6
Storage Temperature Range -65 150 °C 6
Lead Temperature (Soldering, 10 sec) 300 °C 10 sec 6
ESD Rating IEC 1000-4-2 Air (RS-232 I/Os) -15 15 kV RS-232 I/Os 6
ESD Rating IEC 1000-4-2 Contact (RS-232 I/Os) -8 8 kV RS-232 I/Os 6
Thermal Impedance, LFCSP_WQ (CP-32-7) θJA 32.5 °C/W 6
ICC Max ICC 0.85 mA Product selection guide, ADM3310E 7
ICC Shutdown Max ICC 1 µA Shutdown; typically 20 nA 7

CAD (KiCad official)

  • Symbol: ADM3310EACPZ
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: LFCSP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm3310eacpz-etched.step / adm3310eacpz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm3310eacpz.step / adm3310eacpz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 19555870393bbfda, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF