main
Ray
Publish 0.1.0
fa08c1c
ADM2587EBRWZ
Analog Devices · Isolated RS-485/422 Transceivers · SOIC-20-300mil
ADM2587EBRWZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Logic-side ground reference for the VCC supply and logic pins. |
| 2 | VCC | power_in | Logic-side power supply; a 0.1 µF and 0.01 µF decoupling capacitor is recommended between Pin 2 and Pin 1. |
| 3 | GND1 | power_in | Logic-side ground. |
| 4 | RxD | output | Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when the receiver is disabled by RE high. |
| 5 | RE | input | Active-low receiver enable; driving it low enables the receiver and driving it high disables it. |
| 6 | DE | input | Driver enable; driving it high enables the driver and driving it low disables the driver. |
| 7 | TxD | input | Driver data input; the data to be transmitted by the driver is applied to this pin. |
| 8 | VCC | power_in | Logic-side power supply; a 0.1 µF and 10 µF decoupling capacitor is recommended between Pin 8 and Pin 9. |
| 9 | GND1 | power_in | Logic-side ground. |
| 10 | GND1 | power_in | Logic-side ground. |
| 11 | GND2 | power_in | Ground for the isolated DC-to-DC converter; connect to Pin 14 through one ferrite bead to PCB ground. |
| 12 | VISOOUT | power_out | Isolated power supply output that must be connected externally to VISOIN, with a 10 µF reservoir and 0.1 µF decoupling capacitor between Pin 12 and Pin 11. |
| 13 | Y | output | Driver noninverting output. |
| 14 | GND2 | power_in | Ground for the isolated DC-to-DC converter; connect to Pin 11 through one ferrite bead to PCB ground. |
| 15 | Z | output | Driver inverting output. |
| 16 | GND2 | power_in | Bus-side ground; do not connect this pin to Pin 14 or Pin 11. |
| 17 | B | input | Receiver inverting input. |
| 18 | A | input | Receiver noninverting input. |
| 19 | VISOIN | power_in | Isolated power supply input that must be connected externally to VISOOUT through a ferrite bead and short trace, with a 0.1 µF and 0.01 µF decoupling capacitor recommended between Pin 19 and Pin 20. |
| 20 | GND2 | power_in | Ground, bus side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-20-300mil |
| Category | Signal Isolation Devices |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current, VCC=3.3 V, 100 Ω load | ICC | 90 | mA | Data Rate ≤ 500 kbps, VCC = 3.3 V, 100 Ω load between Y and Z | 3 | ||
| Supply current, VCC=5 V, 100 Ω load | ICC | 72 | mA | VCC = 5 V, 100 Ω load between Y and Z | 3 | ||
| Supply current, VCC=3.3 V, 54 Ω load | ICC | 125 | mA | VCC = 3.3 V, 54 Ω load between Y and Z | 3 | ||
| Supply current, VCC=5 V, 54 Ω load | ICC | 98 | mA | VCC = 5 V, 54 Ω load between Y and Z | 3 | ||
| Supply current, 120 Ω load | ICC | 120 | mA | 120 Ω load between Y and Z | 3 | ||
| Isolated supply voltage | VISOUT | 3.3 | V | 3 | |||
| Differential output voltage, loaded (RS-422) | /VOD2/ | 2 | 3.6 | V | RL = 100 Ω (RS-422), see Figure 23 | 3 | |
| Differential output voltage, loaded (RS-485) | /VOD2/ | 1.5 | 3.6 | V | RL = 54 Ω (RS-485), see Figure 23 | 3 | |
| Differential output voltage, common-mode range | /VOD3/ | 1.5 | 3.6 | V | −7 V ≤ VTEST1 ≤ 12 V, see Figure 24 | 3 | |
| Change in differential output voltage for complementary states | Δ/VOD/ | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 | ||
| Common-mode output voltage | VOC | 3 | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 | ||
| Change in common-mode output voltage for complementary states | Δ/VOC/ | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 | ||
| Short-circuit output current | IOS | 200 | mA | 3 | |||
| Output leakage current (Y, Z), high | IO | 30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 | ||
| Output leakage current (Y, Z), low | IO | -30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 | ||
| Logic input current | II | -10 | 0.01 | 10 | µA | DE, RE, TxD | 3 |
| Differential input threshold voltage | VTH | -200 | -125 | -30 | mV | −7 V < VCM < +12 V | 3 |
| Input voltage hysteresis | VHYS | 15 | mV | VOC = 0 V | 3 | ||
| Receiver input current (A, B), high | II | 125 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 | ||
| Receiver input current (A, B), low | II | -100 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 | ||
| Line input resistance | RIN | 96 | kΩ | −7 V < VCM < +12 V | 3 | ||
| Output voltage low | VOL | 0.2 | 0.4 | V | IO = 1.5 mA, VA − VB = −0.2 V | 3 | |
| Receiver short-circuit current | 100 | mA | 3 | ||||
| Common-mode transient immunity | 25 | kV/µs | VCM = 1 kV, transient magnitude = 800 V | 3 | |||
| Maximum data rate | 500 | kbps | ADM2587E | 4 | |||
| Propagation delay, low to high (driver) | tDPLH | 250 | 503 | 700 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Propagation delay, high to low (driver) | tDPHL | 250 | 510 | 700 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Output skew (driver) | tSKEW | 7 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 | |
| Rise time/fall time (driver) | tDR, tDF | 200 | 1100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 | |
| Enable time (driver) | tZL, tZH | 2.5 | µs | RL = 110 Ω, CL = 50 pF, see Figure 26 and Figure 31 | 4 | ||
| Disable time (driver) | tLZ, tHZ | 200 | ns | RL = 110 Ω, CL = 50 pF, see Figure 26 and Figure 31 | 4 | ||
| Propagation delay, low to high (receiver) | tRPLH | 91 | 200 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 | |
| Propagation delay, high to low (receiver) | tRPHL | 95 | 200 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 | |
| Output skew (receiver) | tSKEW | 4 | 30 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 | |
| Enable time (receiver) | tZL, tZH | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 28 and Figure 32 | 4 | ||
| Disable time (receiver) | tLZ, tHZ | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 28 and Figure 32 | 4 | ||
| Resistance (input-to-output) | RI-O | 1012 | Ω | 4 | |||
| Capacitance (input-to-output) | CI-O | 3 | pF | f = 1 MHz | 4 | ||
| Input capacitance | CI | 4 | pF | 4 | |||
| Supply voltage, recommended operating range | VCC | 3 | 5.5 | V | 3 | ||
| Operating temperature range | -40 | 85 | °C | 7 | |||
| Supply voltage VCC | VCC | -0.5 | 7 | V | 7 | ||
| Digital input voltage (DE, RE, TxD) | -0.5 | V | Maximum VDD + 0.5 V | 7 | |||
| Digital output voltage (RxD) | -0.5 | V | Maximum VDD + 0.5 V | 7 | |||
| Driver output/receiver input voltage | -9 | 14 | V | 7 | |||
| Storage temperature range | -55 | 150 | °C | 7 | |||
| ESD (HBM) on A, B, Y, Z pins | -15 | 15 | kV | Human body model | 7 | ||
| ESD (HBM) on other pins | -2 | 2 | kV | Human body model | 7 | ||
| Thermal resistance, junction to ambient | θJA | 50 | °C/W | 7 | |||
| Lead temperature, soldering | 260 | °C | 10 sec | 7 | |||
| Lead temperature, vapor phase | 215 | °C | 60 sec | 7 | |||
| Lead temperature, infrared | 220 | °C | 15 sec | 7 | |||
| Maximum continuous working voltage (AC bipolar) | 524 | V peak | Basic insulation per IEC 60747-17 (VDE 0884-17) | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Insulation Characteristics................................. 6 Absolute Maximum Ratings...................................7 | 2 |
CAD (KiCad official)
- Symbol:
ADM2587EBRWZ - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
adm2587ebrwz-etched.step/adm2587ebrwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm2587ebrwz.step/adm2587ebrwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
77a52a9e60364895, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADM2587EBRWZ
**Analog Devices** · Isolated RS-485/422 Transceivers · SOIC-20-300mil
ADM2587EBRWZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Logic-side ground reference for the VCC supply and logic pins. |
| 2 | VCC | power_in | Logic-side power supply; a 0.1 µF and 0.01 µF decoupling capacitor is recommended between Pin 2 and Pin 1. |
| 3 | GND1 | power_in | Logic-side ground. |
| 4 | RxD | output | Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when the receiver is disabled by RE high. |
| 5 | RE | input | Active-low receiver enable; driving it low enables the receiver and driving it high disables it. |
| 6 | DE | input | Driver enable; driving it high enables the driver and driving it low disables the driver. |
| 7 | TxD | input | Driver data input; the data to be transmitted by the driver is applied to this pin. |
| 8 | VCC | power_in | Logic-side power supply; a 0.1 µF and 10 µF decoupling capacitor is recommended between Pin 8 and Pin 9. |
| 9 | GND1 | power_in | Logic-side ground. |
| 10 | GND1 | power_in | Logic-side ground. |
| 11 | GND2 | power_in | Ground for the isolated DC-to-DC converter; connect to Pin 14 through one ferrite bead to PCB ground. |
| 12 | VISOOUT | power_out | Isolated power supply output that must be connected externally to VISOIN, with a 10 µF reservoir and 0.1 µF decoupling capacitor between Pin 12 and Pin 11. |
| 13 | Y | output | Driver noninverting output. |
| 14 | GND2 | power_in | Ground for the isolated DC-to-DC converter; connect to Pin 11 through one ferrite bead to PCB ground. |
| 15 | Z | output | Driver inverting output. |
| 16 | GND2 | power_in | Bus-side ground; do not connect this pin to Pin 14 or Pin 11. |
| 17 | B | input | Receiver inverting input. |
| 18 | A | input | Receiver noninverting input. |
| 19 | VISOIN | power_in | Isolated power supply input that must be connected externally to VISOOUT through a ferrite bead and short trace, with a 0.1 µF and 0.01 µF decoupling capacitor recommended between Pin 19 and Pin 20. |
| 20 | GND2 | power_in | Ground, bus side. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-20-300mil |
| Category | Signal Isolation Devices |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current, VCC=3.3 V, 100 Ω load | ICC | | | 90 | mA | Data Rate ≤ 500 kbps, VCC = 3.3 V, 100 Ω load between Y and Z | 3 |
| Supply current, VCC=5 V, 100 Ω load | ICC | | | 72 | mA | VCC = 5 V, 100 Ω load between Y and Z | 3 |
| Supply current, VCC=3.3 V, 54 Ω load | ICC | | | 125 | mA | VCC = 3.3 V, 54 Ω load between Y and Z | 3 |
| Supply current, VCC=5 V, 54 Ω load | ICC | | | 98 | mA | VCC = 5 V, 54 Ω load between Y and Z | 3 |
| Supply current, 120 Ω load | ICC | | | 120 | mA | 120 Ω load between Y and Z | 3 |
| Isolated supply voltage | VISOUT | | 3.3 | | V | | 3 |
| Differential output voltage, loaded (RS-422) | /VOD2/ | 2 | 3.6 | | V | RL = 100 Ω (RS-422), see Figure 23 | 3 |
| Differential output voltage, loaded (RS-485) | /VOD2/ | 1.5 | 3.6 | | V | RL = 54 Ω (RS-485), see Figure 23 | 3 |
| Differential output voltage, common-mode range | /VOD3/ | 1.5 | 3.6 | | V | −7 V ≤ VTEST1 ≤ 12 V, see Figure 24 | 3 |
| Change in differential output voltage for complementary states | Δ/VOD/ | | | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 |
| Common-mode output voltage | VOC | | 3 | | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 |
| Change in common-mode output voltage for complementary states | Δ/VOC/ | | | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 23 | 3 |
| Short-circuit output current | IOS | | | 200 | mA | | 3 |
| Output leakage current (Y, Z), high | IO | | | 30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 |
| Output leakage current (Y, Z), low | IO | -30 | | | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 |
| Logic input current | II | -10 | 0.01 | 10 | µA | DE, RE, TxD | 3 |
| Differential input threshold voltage | VTH | -200 | -125 | -30 | mV | −7 V < VCM < +12 V | 3 |
| Input voltage hysteresis | VHYS | | 15 | | mV | VOC = 0 V | 3 |
| Receiver input current (A, B), high | II | | | 125 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 |
| Receiver input current (A, B), low | II | -100 | | | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 |
| Line input resistance | RIN | 96 | | | kΩ | −7 V < VCM < +12 V | 3 |
| Output voltage low | VOL | | 0.2 | 0.4 | V | IO = 1.5 mA, VA − VB = −0.2 V | 3 |
| Receiver short-circuit current | | | | 100 | mA | | 3 |
| Common-mode transient immunity | | 25 | | | kV/µs | VCM = 1 kV, transient magnitude = 800 V | 3 |
| Maximum data rate | | | | 500 | kbps | ADM2587E | 4 |
| Propagation delay, low to high (driver) | tDPLH | 250 | 503 | 700 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Propagation delay, high to low (driver) | tDPHL | 250 | 510 | 700 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Output skew (driver) | tSKEW | | 7 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Rise time/fall time (driver) | tDR, tDF | | 200 | 1100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 25 and Figure 29 | 4 |
| Enable time (driver) | tZL, tZH | | | 2.5 | µs | RL = 110 Ω, CL = 50 pF, see Figure 26 and Figure 31 | 4 |
| Disable time (driver) | tLZ, tHZ | | | 200 | ns | RL = 110 Ω, CL = 50 pF, see Figure 26 and Figure 31 | 4 |
| Propagation delay, low to high (receiver) | tRPLH | | 91 | 200 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 |
| Propagation delay, high to low (receiver) | tRPHL | | 95 | 200 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 |
| Output skew (receiver) | tSKEW | | 4 | 30 | ns | CL = 15 pF, see Figure 27 and Figure 30 | 4 |
| Enable time (receiver) | tZL, tZH | | | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 28 and Figure 32 | 4 |
| Disable time (receiver) | tLZ, tHZ | | | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 28 and Figure 32 | 4 |
| Resistance (input-to-output) | RI-O | | 1012 | | Ω | | 4 |
| Capacitance (input-to-output) | CI-O | | 3 | | pF | f = 1 MHz | 4 |
| Input capacitance | CI | | 4 | | pF | | 4 |
| Supply voltage, recommended operating range | VCC | 3 | | 5.5 | V | | 3 |
| Operating temperature range | | -40 | | 85 | °C | | 7 |
| Supply voltage VCC | VCC | -0.5 | | 7 | V | | 7 |
| Digital input voltage (DE, RE, TxD) | | -0.5 | | | V | Maximum VDD + 0.5 V | 7 |
| Digital output voltage (RxD) | | -0.5 | | | V | Maximum VDD + 0.5 V | 7 |
| Driver output/receiver input voltage | | -9 | | 14 | V | | 7 |
| Storage temperature range | | -55 | | 150 | °C | | 7 |
| ESD (HBM) on A, B, Y, Z pins | | -15 | | 15 | kV | Human body model | 7 |
| ESD (HBM) on other pins | | -2 | | 2 | kV | Human body model | 7 |
| Thermal resistance, junction to ambient | θJA | | 50 | | °C/W | | 7 |
| Lead temperature, soldering | | | | 260 | °C | 10 sec | 7 |
| Lead temperature, vapor phase | | | | 215 | °C | 60 sec | 7 |
| Lead temperature, infrared | | | | 220 | °C | 15 sec | 7 |
| Maximum continuous working voltage (AC bipolar) | | | | 524 | V peak | Basic insulation per IEC 60747-17 (VDE 0884-17) | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | Insulation Characteristics................................. 6 Absolute Maximum Ratings...................................7 | 2 |
## CAD (KiCad official)
- Symbol: `ADM2587EBRWZ`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files: `adm2587ebrwz-etched.step` / `adm2587ebrwz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm2587ebrwz.step` / `adm2587ebrwz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/adm2582e-2587e.pdf) (22 pp, sha256 `77a52a9e60364895`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adm2587ebrwz-datasheet.pdf)