ADM1192-1ARMZ-R7

{
  "slug": "adm1192-1armz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Power Management Specialized - PMIC, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "adm1192-1armz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm1192-1armz-r7.kicad_sym",
    "adm1192-1armz-r7.kicad_mod",
    "adm1192-1armz-r7.glb",
    "adm1192-1armz-r7.step",
    "adm1192-1armz-r7.lbr",
    "docs/hero.png",
    "docs/adm1192-1armz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm1192-1armz-r7-hero.glb",
    "adm1192-1armz-r7-hero.overlay.json",
    "adm1192-1armz-r7-etched.glb"
  ],
  "component": {
    "mpn": "ADM1192-1ARMZ-R7",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "Power Management Specialized - PMIC",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1192.pdf",
    "parts": {
      "symbol": "adm1192-1armz-r7.kicad_sym",
      "footprint": "adm1192-1armz-r7.kicad_mod",
      "model_3d": "adm1192-1armz-r7-hero.glb",
      "model_3d_plain": "adm1192-1armz-r7-etched.glb",
      "model_3d_step": "adm1192-1armz-r7-etched.step",
      "model_3d_step_plain": "adm1192-1armz-r7.step",
      "lbr": "adm1192-1armz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C657870",
      "digikey": "ADM1192-1ARMZ-R7TR-ND",
      "mouser": "584-ADM1192-1ARMZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T17:08:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADM1192-1ARMZ-R7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM1192-1ARMZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input with an operating range of 3.15 V to 26 V, and an undervoltage lockout circuit resets the ADM1192 when a low supply voltage is detected."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input; a sense resistor between VCC and SENSE generates a voltage proportional to load current, which the current sense amplifier amplifies before ADC digitization."
      },
      {
        "number": "3",
        "name": "SETV",
        "type": "input",
        "description": "Overcurrent threshold input compared with the current sense amplifier output, where a lower SETV voltage causes ALERT to assert at a lower current level, with a typical response time of 1 µs to 2 µs."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground pin."
      },
      {
        "number": "5",
        "name": "TIMER",
        "type": "passive",
        "description": "Timer input where an external capacitor CTIMER sets the period for masking overcurrent conditions, which should be long enough for inrush current to charge the load without tripping a fault."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock pin that is an open-drain input and requires an external resistive pull-up."
      },
      {
        "number": "7",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data I/O pin that is open-drain and requires an external resistive pull-up."
      },
      {
        "number": "8",
        "name": "ADR",
        "type": "input",
        "description": "I2C address pin that can be tied low, tied high, left floating, or tied low through a resistor to set four I2C addresses."
      },
      {
        "number": "9",
        "name": "CLRB",
        "type": "input",
        "description": "Clear pin where toggling it low clears a latched overcurrent condition, and holding it low disables the ALERT output."
      },
      {
        "number": "10",
        "name": "ALERT",
        "type": "output",
        "description": "Active-high, open-drain alert output that asserts when an overcurrent condition is present and latches until cleared manually via the ALERT_EN register or the CLRB pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering guide on page 17 lists ADM1192-1ARMZ-R7 as 10-Lead MSOP, package option RM-10, so the p; The datasheet does not give a KiCad class for TIMER. I classed it as passive because it is an extern; SDA and ALERT are open-drain pins, but the KiCad class list has no open-drain type. SDA is mapped to"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0468,
        "at": "2026-10-30T17:08:08"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1192.pdf",
        "pages": 20,
        "sha256": "9f6ad6335e4f7891",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm1192-1armz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm1192-1armz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "238db0c92e8172a2325f0484b531395f9d4fd9a58de1040e6ca2b694049f2b02",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RM-10",
      "source_page": 17,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          4.65,
          5.15
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "adm1192-1armz-r7.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}