ADM1176-1ARMZ-R7

{
  "schema_version": 1,
  "type": "component",
  "slug": "adm1176-1armz-r7",
  "title": "ADM1176-1ARMZ-R7",
  "brief": "Analog Devices Pre-ordered Chips, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface ics",
    "adm1176-1armz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADM1176-1ARMZ-R7",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1176.pdf",
    "parts": {
      "symbol": "adm1176-1armz-r7.kicad_sym",
      "footprint": "adm1176-1armz-r7.kicad_mod",
      "model_3d": "adm1176-1armz-r7-hero.glb",
      "model_3d_plain": "adm1176-1armz-r7-etched.glb",
      "model_3d_step": "adm1176-1armz-r7-etched.step",
      "model_3d_step_plain": "adm1176-1armz-r7.step",
      "lbr": "adm1176-1armz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C657860",
      "digikey": "505-ADM1176-1ARMZ-R7TR-ND",
      "mouser": "584-ADM1176-1ARMZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:50:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM1176-1ARMZ-R7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM1176-1ARMZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input with an operating range of 3.15 V to 16.5 V; an undervoltage lockout circuit resets the device when a low supply voltage is detected."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input where the sense resistor between VCC and SENSE sets the analog current limit, and the hot swap operation keeps (VCC − VSENSE) at or below 100 mV."
      },
      {
        "number": "3",
        "name": "ON",
        "type": "input",
        "description": "Active-high undervoltage input with an internal comparator trip threshold of 1.3 V that enables hot swap operation."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground pin."
      },
      {
        "number": "5",
        "name": "TIMER",
        "type": "passive",
        "description": "Timer pin where an external capacitor sets a 270 ms/µF initial timing cycle delay and a 21.7 ms/µF fault delay, and GATE turns off when TIMER is pulled beyond the upper threshold."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock pin, an open-drain input that requires an external resistive pull-up."
      },
      {
        "number": "7",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data I/O pin, open-drain, that requires an external resistive pull-up."
      },
      {
        "number": "8",
        "name": "A0",
        "type": "input",
        "description": "I2C address pin that can be tied low, tied high, left floating, or tied low through a resistor, and together with A1 selects one of sixteen I2C addresses."
      },
      {
        "number": "9",
        "name": "A1",
        "type": "input",
        "description": "I2C address pin that can be tied low, tied high, left floating, or tied low through a resistor, and together with A0 selects one of sixteen I2C addresses."
      },
      {
        "number": "10",
        "name": "GATE",
        "type": "output",
        "description": "High-side gate drive for the external N-channel FET, using a charge pump with a 12.5 µA pull-up current, which regulates the load current to 100 mV across the sense resistor by modulating the gate."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.012,
        "at": "2026-10-28T15:49:28"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1176.pdf",
        "pages": 24,
        "sha256": "763d5aad385b8e1d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm1176-1armz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm1176-1armz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8c97f05457d2cd286d09ec81f1c690a468a8dab8e449b49d2e7ff0abca71cf62",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "MSOP-10",
      "Category": "Interface ICs",
      "Pins": "10"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "763d5aad385b8e1dd7575dc9aaaf1f93f5379701fc8531033a4aebaca6139a42",
      "rows": [
        {
          "name": "Operating Voltage Range",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3.15,
          "typ": null,
          "max": 16.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Undervoltage Lockout Rising",
          "symbol": "VUVLO",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 2.8,
          "max": null,
          "conditions": "VCC rising",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Rising Threshold",
          "symbol": "VONTH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.26,
          "typ": 1.3,
          "max": 1.34,
          "conditions": "ON rising",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Trip Threshold Hysteresis",
          "symbol": "VONHYST",
          "kind": "electrical",
          "unit": "mV",
          "min": 35,
          "typ": 50,
          "max": 65,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Current",
          "symbol": "IINON",
          "kind": "electrical",
          "unit": "nA",
          "min": -100,
          "typ": null,
          "max": 100,
          "conditions": "ON < 1.5 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Current",
          "symbol": "IINON",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Leakage",
          "symbol": "ISENSE",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "VSENSE = VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Overcurrent Limit Threshold",
          "symbol": "VLIM",
          "kind": "electrical",
          "unit": "mV",
          "min": 97,
          "typ": 100,
          "max": 103,
          "conditions": "VLIM = (VCC − VSENSE), closed-loop regulation to a current limit",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Drive Voltage",
          "symbol": "VGATE",
          "kind": "electrical",
          "unit": "V",
          "min": 3,
          "typ": 6,
          "max": 9,
          "conditions": "VGATE − VCC, VCC = 3.15 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Drive Voltage",
          "symbol": "VGATE",
          "kind": "electrical",
          "unit": "V",
          "min": 9,
          "typ": 11,
          "max": 13,
          "conditions": "VGATE − VCC, VCC = 5 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Drive Voltage",
          "symbol": "VGATE",
          "kind": "electrical",
          "unit": "V",
          "min": 7,
          "typ": 10,
          "max": 13,
          "conditions": "VGATE − VCC, VCC = 16.5 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Pull-Up Current",
          "symbol": "IGATE",
          "kind": "electrical",
          "unit": "µA",
          "min": 8,
          "typ": 12.5,
          "max": 17,
          "conditions": "VGATE = 0 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Pull-Up Current (Power-On Reset)",
          "symbol": "ITIMERUPPOR",
          "kind": "electrical",
          "unit": "µA",
          "min": -3.5,
          "typ": -5,
          "max": -6.5,
          "conditions": "Initial cycle, VTIMER = 1 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Pull-Up Current (Fault Mode)",
          "symbol": "ITIMERUPFAULT",
          "kind": "electrical",
          "unit": "µA",
          "min": -40,
          "typ": -60,
          "max": -80,
          "conditions": "During current fault, VTIMER = 1 V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Trip Threshold High",
          "symbol": "VTIMERH",
          "kind": "electrical",
          "unit": "V",
          "min": 1.26,
          "typ": 1.3,
          "max": 1.34,
          "conditions": "TIMER rising",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Trip Threshold Low",
          "symbol": "VTIMERL",
          "kind": "electrical",
          "unit": "V",
          "min": 0.175,
          "typ": 0.2,
          "max": 0.225,
          "conditions": "TIMER falling",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Set Address to 00 Low State",
          "symbol": "VADRLOWV",
          "kind": "electrical",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 0.8,
          "conditions": "Low state",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Resistor to Ground State (01 decode)",
          "symbol": "RADRLOWZ",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 135,
          "typ": 150,
          "max": 165,
          "conditions": "Resistor to ground state, load pin with specified resistance for 01 decode",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Set Address to 11 High State",
          "symbol": "VADRHIGHV",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": 5.5,
          "conditions": "High state",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Set Address to 10 Open State Input Leakage",
          "symbol": "IADRHIGHZ",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "Open state, maximum load allowed on the A0 pin and the A1 pin for 10 decode",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Fast Overcurrent Response Time",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 4,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Setup Time for a Repeated Start Condition",
          "symbol": "tSU;STA",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "SDA Output Data Hold Time",
          "symbol": "tHD;DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": 900,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Setup Time for a Stop Condition",
          "symbol": "tSU;STO",
          "kind": "timing",
          "unit": "ns",
          "min": 600,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Bus Free Time Between a Stop and a Start Condition",
          "symbol": "tBUF",
          "kind": "timing",
          "unit": "ns",
          "min": 1300,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Capacitive Load for Each Bus Line",
          "symbol": "",
          "kind": "timing",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 400,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCC Pin Absolute Maximum",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "SENSE Pin Absolute Maximum",
          "symbol": "SENSE",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "TIMER Pin Voltage",
          "symbol": "TIMER",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "ON Pin Voltage",
          "symbol": "ON",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "GATE Pin Absolute Maximum",
          "symbol": "GATE",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "SDA Pin, SCL Pin Voltage",
          "symbol": "SDA, SCL",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "A0 Pin, A1 Pin Voltage",
          "symbol": "A0, A1",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature Range",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Lead Temperature (Soldering, 10 sec)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "Soldering, 10 sec",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Junction Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Ambient, 10-Lead MSOP",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 137.5,
          "max": null,
          "conditions": "Device soldered in a circuit board, surface-mount package",
          "source_page": 6,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "adm1176-1armz-r7"
  ],
  "discovery_pitch": "ADM1176-1ARMZ-R7 (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm1176-1armz-r7.kicad_sym",
    "adm1176-1armz-r7.kicad_mod",
    "adm1176-1armz-r7.glb",
    "adm1176-1armz-r7.step",
    "adm1176-1armz-r7.lbr",
    "docs/hero.png",
    "docs/adm1176-1armz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm1176-1armz-r7-hero.glb",
    "adm1176-1armz-r7-hero.overlay.json",
    "adm1176-1armz-r7-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}