ADM1176-1ARMZ-R7

{
  "slug": "adm1176-1armz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Pre-ordered Chips, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "adm1176-1armz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm1176-1armz-r7.kicad_sym",
    "adm1176-1armz-r7.kicad_mod",
    "adm1176-1armz-r7.glb",
    "adm1176-1armz-r7.step",
    "adm1176-1armz-r7.lbr",
    "docs/hero.png",
    "docs/adm1176-1armz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm1176-1armz-r7-hero.glb",
    "adm1176-1armz-r7-hero.overlay.json",
    "adm1176-1armz-r7-etched.glb"
  ],
  "component": {
    "mpn": "ADM1176-1ARMZ-R7",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1176.pdf",
    "parts": {
      "symbol": "adm1176-1armz-r7.kicad_sym",
      "footprint": "adm1176-1armz-r7.kicad_mod",
      "model_3d": "adm1176-1armz-r7-hero.glb",
      "model_3d_plain": "adm1176-1armz-r7-etched.glb",
      "model_3d_step": "adm1176-1armz-r7-etched.step",
      "model_3d_step_plain": "adm1176-1armz-r7.step",
      "lbr": "adm1176-1armz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C657860",
      "digikey": "505-ADM1176-1ARMZ-R7TR-ND",
      "mouser": "584-ADM1176-1ARMZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:50:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM1176-1ARMZ-R7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM1176-1ARMZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input with an operating range of 3.15 V to 16.5 V; an undervoltage lockout circuit resets the device when a low supply voltage is detected."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input where the sense resistor between VCC and SENSE sets the analog current limit, and the hot swap operation keeps (VCC − VSENSE) at or below 100 mV."
      },
      {
        "number": "3",
        "name": "ON",
        "type": "input",
        "description": "Active-high undervoltage input with an internal comparator trip threshold of 1.3 V that enables hot swap operation."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground pin."
      },
      {
        "number": "5",
        "name": "TIMER",
        "type": "passive",
        "description": "Timer pin where an external capacitor sets a 270 ms/µF initial timing cycle delay and a 21.7 ms/µF fault delay, and GATE turns off when TIMER is pulled beyond the upper threshold."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "I2C clock pin, an open-drain input that requires an external resistive pull-up."
      },
      {
        "number": "7",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data I/O pin, open-drain, that requires an external resistive pull-up."
      },
      {
        "number": "8",
        "name": "A0",
        "type": "input",
        "description": "I2C address pin that can be tied low, tied high, left floating, or tied low through a resistor, and together with A1 selects one of sixteen I2C addresses."
      },
      {
        "number": "9",
        "name": "A1",
        "type": "input",
        "description": "I2C address pin that can be tied low, tied high, left floating, or tied low through a resistor, and together with A0 selects one of sixteen I2C addresses."
      },
      {
        "number": "10",
        "name": "GATE",
        "type": "output",
        "description": "High-side gate drive for the external N-channel FET, using a charge pump with a 12.5 µA pull-up current, which regulates the load current to 100 mV across the sense resistor by modulating the gate."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.012,
        "at": "2026-10-28T15:49:28"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1176.pdf",
        "pages": 24,
        "sha256": "763d5aad385b8e1d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm1176-1armz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm1176-1armz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8c97f05457d2cd286d09ec81f1c690a468a8dab8e449b49d2e7ff0abca71cf62",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}